Re: KPA1500 Thermal problems

Posted by Jim Miller on Nov 12, 2019; 12:34am
URL: http://elecraft.85.s1.nabble.com/KPA1500-Thermal-problems-tp7656375p7656393.html

Unit is now in transit to Elecraft for repair.

Jim ab3cv

> On Nov 11, 2019, at 9:03 AM, Jim Miller <[hidden email]> wrote:
>


I participated in the WAE RTTY contest this past weekend and was having problems with thermal tripping.

I have resonant antennas for 80, 40 and 20m and had SWR between 1:1 and 1.2:1, power nominally set between 1400-1500w.

I found that I couldn't repeatedly CQ without temperature creeping up so I paused to around 50% duty cycle to stop that.

However when sending QTC which amount to about 200 characters the temperature would rapidly increase and eventually thermal trip.

I took several actions to try to compensate:

I opened the shack windows and bundled up. Shack then stayed at 60f or below.
I immediately manually cranked the fan speed to max (5) when started to send QTCs.
I rode the drive power downward as the power increased to stay below the trip point of 105c.

Upon taking all these actions I was able to eventually send the QTC packets but it was unnerving and unexpected.

This is a low serial number KPA1500 but with latest production firmware.

What have others seen?

73

jim ab3cv
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]