Re: K3 - Power cable voltage drop
Posted by
KeithWE6R on
Dec 26, 2019; 11:24pm
URL: http://elecraft.85.s1.nabble.com/K3-Power-cable-voltage-drop-tp7657290p7657436.html
Notes for all;
Check the K3 config menu item "ADC REF". If at 5.00 it is probably at
default.
(if at 4.00 a glitch occurred, probably during FW update, and will FUBAR
the internal metering. Set to 5.00 or read on).
(I check this during checkout, so if it has been in for Service, it
should be OK).
Higher accuracy of the K3 items like the internal Volt-Meter can be had
if this is set properly.
With a known external meter on Pin 2 to ground of the 15 pin ACCY connector;
Go into config menu ADC REF and set it.
Also you can stick your probes into the Anderson connectors at the back
of the radio during full power TX to see the actual voltage to the radio.
(I have a digital LED meter connected with small wires to the Anderson
supply wire right at the back of the radio on my K3 test bench).
Keith WE6R
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]