Login  Register

Re: QRO - KPA500 Failure

Posted by NK7Z on Feb 06, 2020; 9:16pm
URL: http://elecraft.85.s1.nabble.com/QRO-KPA500-Failure-tp7658244p7658249.html

Hi Rick,

I like your call sign!  :)

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources

On 2/6/20 1:07 PM, Rick Bates, NK7I wrote:

> Since the SWR is still nominal into the amp (as shown on your radio),
> it's not likely the tuned input circuits (which is confirmed from no
> output on all bands).
>
> This points to the high power module.  Running low output power from it,
> is far less efficient than pushing it hard (compare wattages consumed to
> RF watts output delivered at different output levels); which may have
> stressed the finals.  Ideally you run the previous stages at
> low-moderate power for lower IMD, then punch it up with the amp.
>
> The "HIGH SWR" fault you saw is then very likely the final signing QRT
> SK.  You can confirm that with Elecraft wizards.
>
> That module isn't hard to swap out, but it would be best (slightly more
> costly) for the entire amp to visit it's parents, so that other updates
> that may not have been done, can be done. Many of them, really matter.
>
> While also not cheap in shipping and insurance (ask me how I know?) that
> is often the better choice.
>
> Rick, NK7I
>
> On 2/6/2020 12:54 PM, Michael Walker wrote:
>> Amps making noises like that usually mean you have to take the covers
>> off.
>>
>> They are easy enough to repair if you are so inclined.  If not, then you
>> will need to contact Elecraft support and odds are you will have to
>> send it
>> home for a Spa day.
>>
>> Mike va3mw
>>
>>
>> On Thu, Feb 6, 2020 at 3:35 PM Jim Brown <[hidden email]>
>> wrote:
>>
>>> On 2/6/2020 12:15 PM, Jim Mullen wrote:
>>>> Any pointers of where to start looking?
>>> 1) What SWR does the rig see with the amp off?
>>> 2) Make notes of any error messages given by the KPA500 display.
>>> 3) Call Elecraft Support
>>>
>>> 73, Jim K9YC
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[hidden email]
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to [hidden email]
>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]