The same PL-259 reducers for RG-8X works for RG-6. Same for BNC connectors.
> On Apr 2, 2020, at 10:13 PM, Ignacy <
[hidden email]> wrote:
>
> The plus of RG6 is low price, less than 10c a foot. In receive applications,
> they seem to be lasting forever. In transmit too but small nuisances are
> necessity to use a tuner for low SWR antennas and nonstandard connectors.
> But running two in parallel does not make any sense.
>
> Half a year ago I found Rg6's 50 Ohm equivalent on ebay. Altelix AX240 for
> $99/1000ft. Measured parameters same as LMR240. The plus of cheap and good
> 1000-ft roll (with crimp connectors that can be attached in 30 sec) is that
> the coax can be cut as needed, with no worries about cost.
>
> Ignacy NO9E
>
>
>
> --
> Sent from:
http://elecraft.365791.n2.nabble.com/> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
>