Re: Elecraft K3s, etc. bonding

Posted by Bill Frantz on Apr 24, 2020; 12:39am
URL: http://elecraft.85.s1.nabble.com/Elecraft-K3s-etc-bonding-tp7659942p7660071.html

I changed the ring terminals on my grounding system to spade
lugs for ease of removal.

73 Bill AE6JV

On 4/23/20 at 10:27 AM, [hidden email] (N4ZR) wrote:

>I think the answer lies in the ground bus.  I used a 3/4"
>copper water pipe along the back edge of my desk, with a short
>pigtail of #2 wire to the K3.  I used a yellow-jacketed Home
>Depot ring terminal on both ends of the #2, and metal-tapping
>screws to connect to the bus.
-------------------------------------------------------------------------
Bill Frantz        | When it comes to the world     | Periwinkle
[phone]      | around us, is there any choice | 150
Rivermead Rd #235
www.pwpconsult.com | but to explore? - Lisa Randall |
Peterborough, NH 03458

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]