Re: KPA500 Dead

Posted by Tom Berry on Jun 05, 2020; 7:00pm
URL: http://elecraft.85.s1.nabble.com/k3-High-Current-Message-on-10-meters-tp7347172p7661712.html

On 6/5/2020 2:41 PM, Bob McGraw K4TAX wrote:

> You say you checked the "fuse" and it is OK.   In fact, there are two
> fuses.  If either has failed the amp won't power on.   Then check the
> voltage at the outlet from where the amp is powered.
>
> If you don't know where to start looking,.........if the above two
> items are OK, then I suggest sending an e-mail to tech support at
> Elecraft and ask for a RA.  Chances are the issue is beyond local
> repair, either by knowledge or test equipment and parts.
>
> 73
>
> Bob, K4TAX
>

Thanks Bob,

I am sure you are correct.   Just hate to send it off since I use it
about every day.  I am retired and if I don't have any wife jobs then
I'm on the radio.

I have seen you give many good answers here.

Thanks

73 Tom AA4VV

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]