K3S & 2m Internal Transverter Calibration Problem Using External Reference
Posted by
stengrevics on
Aug 11, 2020; 12:20pm
URL: http://elecraft.85.s1.nabble.com/K3S-2m-Internal-Transverter-Calibration-Problem-Using-External-Reference-tp7664014.html
I am using an external reference to lock the K3S' frequency. The resulting frequency is 100% accurate on the low bands and on 6 meters. However, on 2 meters, the frequency is approximately 800 Hz low.
The manual states that using an external reference will lock the frequency but that it will be somewhat less accurate (not 800 Hz less accurate). There is no procedure given for calibration with an external reference oscillator.
I suppose I could play with the offset, but that seems hit or miss. I would appreciate any suggestions.
73,
John
WA1EAZ
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]