http://elecraft.85.s1.nabble.com/KX3-Why-more-power-efficient-at-or-below-3-W-tp7667847p7668252.html
Okay, but sometimes the changeover point is 5 watts instead of 3 -- what's
> There are two windings on the PA output transformer: 1:1 and 1:4. We
> select one of these based on power level, battery voltage, and in some
> cases, operating mode.
>
> In the 1:1 setting, the PA drain impedance is 50 ohms, making it more
> efficient for at power levels, reducing current drain.
>
> In the 1:4 setting, the PA drain impedance is 12.5 ohms; the transformer
> steps it back up to 50 ohms for the low-pass filters. In this case it's
> more efficient at higher power levels, at the expense of higher current
> drain.
>
> Wayne
> N6KR
>
>
>
> > On Jan 26, 2021, at 11:07 AM, Julia Tuttle <
[hidden email]>
> wrote:
> >
> > The manual states in a couple spots that the KX3 can transmit more
> > power-efficiently when output power is at or below 3 Watts.
> >
> > Why is this? Is there an (additional?) amplifier stage that is bypassed
> at
> > these lower power levels?
> >
> > Thanks,
> >
> > Julie
> > ______________________________________________________________
> > Elecraft mailing list
> > Home:
http://mailman.qth.net/mailman/listinfo/elecraft> > Help:
http://mailman.qth.net/mmfaq.htm> > Post: mailto:
[hidden email]
> >
> > This list hosted by:
http://www.qsl.net> > Please help support this email list:
http://www.qsl.net/donate.html> > Message delivered to
[hidden email]
>
>