Login  Register

Re: KBPF3A switching frequencies and performance

Posted by Elecraft mailing list on Apr 22, 2021; 12:18pm
URL: http://elecraft.85.s1.nabble.com/KBPF3A-switching-frequencies-and-performance-tp7669075p7669152.html

 Brian,Thanks for your information which got me thinking again about my situation.  I went back and set the config for the KBPF3 to "not inSt"  and found no difference at the signal levels at the switchover at 1700 Kc.  Toggling back and forth between "not inSt" and "nor" I verified that there is no change in signal levels.  On the surface it appears that I purchased a broken used KBPF3.  Now I really have to take things apart to figure out what's wrong.
Russ, N3CO
    On Tuesday, April 20, 2021, 07:23:37 PM EDT, Brian Hunt <[hidden email]> wrote:  
 
 This thread also got my curiosity up.  Several years ago I upgraded my
K3 #41xx with the KBPF3 including the 'A' mod of the capacitor on the RF
board.  I never really checked it out except for the 630 meter coverage
and transmit capability - both were as advertised.

Using a wideband noise generator (QRP Guys K7QO Noise Bridge) I tuned
from about 500 kHz up to 30 Mhz and was able to identify the filter
switch-over points (most of them anyway).  I measured the received noise
level using the P3 dBm scale.  At none of the switch points was the
noise level more than about 5 dB different from one side to the other. 
By continuously tuning and watching the display, it was apparent that
the differences were mainly due to roll off of one filter segment or the
other.  The gain was uniformly consistent across each of the ham bands
but sometimes rolled off at the KBPF3 switch points.  The area between
7.41 MHz and 8.4 MHz is kind of no-man's land due to the first IF being
there.  At the IF frequency the gain was down >50 dB.

73,
Brian, K0DTJ

On 4/20/2021 08:57, w4sc wrote:
> A little back ground,,
>
> The effort started as a result of my using WWV at 15.000000 MHz for calibrating the reference oscillator.  Tuning from 14.999999 to 15.000000 MHz I noticed a 9 to 12 Db drop in signal strength of WWV.
>
> .......
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]  
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]