Posted by
Dick Dievendorff on
Aug 31, 2008; 1:56pm
URL: http://elecraft.85.s1.nabble.com/Unable-to-save-configuration-beta-2-34-tp795454p795488.html
This generally indicates a marginal communications path. If you're using a
USB to Serial Adapter, try changing the K3's RS-232 rate to 38,400 and try
again. It's counterintuitive, but sometimes the higher data rates work
better.
The K3 Utility issues a series of commands and is carefully analyzing the
response's format. If the response comes back in other than the expected
format, after some number of retries the save is abandoned with this error
indication.
Dick, K6KR
-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]] On Behalf Of Mike Scott
Sent: Sunday, August 31, 2008 6:31 AM
To:
[hidden email]
Subject: [Elecraft] [K3] Unable to save configuration, beta 2.34
I am running K3 beta 2.34 / 1.89 and I am unable to save a K3 configuration.
I receive the following save configuration error:
Configuration was not saved.
The configuration file is incomplete, and man not be used for restore.
Is this a bug or is there something I need to do to make it work?
Mike Scott - AE6WA
Tarzana, CA (DM04 / near LA)
K3-100 #508/ KX1 #1311
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com