that "mojo" thing

[K8RDD]

Chris;
    An Elecraft to Elecraft contact, would that be double Mojo or Mojo squared?
Randy
K8RDD
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[N5GE]

On Sat, 23 Feb 2008 15:30:14 -0500, you wrote:

>Chris;
>    An Elecraft to Elecraft contact, would that be double Mojo or Mojo squared?

Which gives the formula E = Mc Squared

Where E = Elecraft, M = Mojo, c = contacts

>Randy
>K8RDD
>_______________________________________________
>Elecraft mailing list
>Post to: [hidden email]
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft   
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com

Tom, N5GE - SWOT 3537 - Grid EM12jq

"They that can give up essential liberty
to obtain a little temporary safety
deserve neither liberty nor safety."

--Benjamin Franklin 1775


Support the entire Constitution, not
just the parts you like.

http://www.n5ge.com
http://www.eQSL.cc/Member.cfm?N5GE

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Ehrlich]

Ever since loading the latest firmware this problem has occurred:

I am listening to a cw signal with the bandwidth set to maximum (2.8 Khz on
the display)
I have centered a cw signal in the exact center of the cwt display .. I am
exactly on frequency.
I have the bandwidth display centered using the shift control.

Then I reduce bandwidth slowly and when I get down to about 500 hertz the
signal nearly disappears.  I can recover it using the shift control (about
FC 35 on the display) but as I continue reducing bandwidth more and more
shift is needed to hold the signal until at about 200 hertz bandwidth there
is no signal left and the shift control is no longer effective.

Before the last firmware upgrade I could crank the bandwidth down to 50
hertz while everything remained centered on the display.

I have checked and rechecked all filter settings.  They are all as I had
them set up originally.

What has happened?

Don K7FJ
K3  #195
Filters:  6 KHz , Stock 2.7KHz, 200 Hz

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Ehrlich]

Well,  I had not checked all of the filter settings after all.  Two of my
filters were set to OFF.
Doh !!

Sorry for the bandwidth.

Don K7FJ

> Ever since loading the latest firmware this problem has occurred:
>
> I am listening to a cw signal with the bandwidth set to maximum (2.8 Khz
> on the display)
> I have centered a cw signal in the exact center of the cwt display .. I am
> exactly on frequency.
> I have the bandwidth display centered using the shift control.
>
> Then I reduce bandwidth slowly and when I get down to about 500 hertz the
> signal nearly disappears.  I can recover it using the shift control (about
> FC 35 on the display) but as I continue reducing bandwidth more and more
> shift is needed to hold the signal until at about 200 hertz bandwidth
> there is no signal left and the shift control is no longer effective.
>
> Before the last firmware upgrade I could crank the bandwidth down to 50
> hertz while everything remained centered on the display.
>
> I have checked and rechecked all filter settings.  They are all as I had
> them set up originally.
>
> What has happened?
>
> Don K7FJ
> K3  #195
> Filters:  6 KHz , Stock 2.7KHz, 200 Hz

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com