turn off SSB monitor on Line Out?
Locked
 
|
Is there a menu entry to turn off the SSB monitor on Line Out?
My (recent vintage K3S) rig seems to put my voice on Line Out regardless of the front panel Monitor setting. I see in the manual a reference to Config:Lin Out=PHONES but, the best I can tell, my rig has no such setting in Lin Out (all I have are numeric settings). Its probably not the answer, but the mismatch between the manual and what I understand of the rig tells me there might be something important I have not learned. Why do I care? I do headphone switching in software--multiple radio audio channels and mic audio are routed to a software mixer which reads those, and writes multiple channels to headphones and to a long term WAV file recording. I would prefer to use the USB Windows Recording device as the "received audio" input to this mixer. But, for now, I am using an analog cable from the "Speaker" jack on the K3S back panel to a sound card because that is the only way I have found to turn off the "monitor" function. That is, when I use the all-digital path, I hear my own voice in my headphones and my brain just won't deal with that gracefully. -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Re: turn off SSB monitor on Line Out?
|
|
Hi,
K3 MCU 5.58 / DSP 2.88 / FPF 1.26, 3-16-2017 * TX LINE OUT (MONITOR) LEVEL NOW ADJUSTABLE: In CONFIG:LIN OUT menu entry, tap '2' (REV switch) to set the "T=" level (TX monitor). Tap '2' again to return to the RX LINE OUT setting. I haven't tried it but I would guess you just adjust it to zero. cheers, Fred KE7X For all KE7X Elecraft books, see www.ke7x.com<http://www.ke7x.com> ________________________________ From: [hidden email] <[hidden email]> on behalf of w5xd <[hidden email]> Sent: Sunday, September 24, 2017 2:52 PM To: [hidden email] Subject: [Elecraft] turn off SSB monitor on Line Out? Is there a menu entry to turn off the SSB monitor on Line Out? My (recent vintage K3S) rig seems to put my voice on Line Out regardless of the front panel Monitor setting. I see in the manual a reference to Config:Lin Out=PHONES but, the best I can tell, my rig has no such setting in Lin Out (all I have are numeric settings). Its probably not the answer, but the mismatch between the manual and what I understand of the rig tells me there might be something important I have not learned. Why do I care? I do headphone switching in software--multiple radio audio channels and mic audio are routed to a software mixer which reads those, and writes multiple channels to headphones and to a long term WAV file recording. I would prefer to use the USB Windows Recording device as the "received audio" input to this mixer. But, for now, I am using an analog cable from the "Speaker" jack on the K3S back panel to a sound card because that is the only way I have found to turn off the "monitor" function. That is, when I use the all-digital path, I hear my own voice in my headphones and my brain just won't deal with that gracefully. -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
Wow, that was a quick answer. The good news is that it eliminates the
problem of "my own voice in my headphones" when operating SSB. The bad news is that it also eliminates CW sidetone. I am going to try it at "T=1" and see if I can hear the sidetone when I want it, and ignore my voice when I don't. Related question: I am new to the K3. I thought I read the manual. There is some reference material somewhere that I obviously have not read. Is there a URL for this hint? *K3 MCU 5.58 / DSP 2.88 / FPF 1.26, 3-16-2017* On 9/24/2017 22:51, Cady, Fred wrote: > > Hi, > > *K3 MCU 5.58 / DSP 2.88 / FPF 1.26, 3-16-2017* > > * * > > > > ** TX LINE OUT (MONITOR) LEVEL NOW ADJUSTABLE:*In CONFIG:LIN OUT menu > entry, tap '2' (REV switch) to set the "T=" level (TX monitor). Tap > '2' again to return to the RX LINE OUT setting. > > > I haven't tried it but I would guess you just adjust it to zero. > > cheers, > > Fred KE7X > > > For all KE7X Elecraft books, see www.ke7x.com <http://www.ke7x.com> > > > > ------------------------------------------------------------------------ > *From:* [hidden email] > <[hidden email]> on behalf of w5xd <[hidden email]> > *Sent:* Sunday, September 24, 2017 2:52 PM > *To:* [hidden email] > *Subject:* [Elecraft] turn off SSB monitor on Line Out? > > Is there a menu entry to turn off the SSB monitor on Line Out? > My (recent vintage K3S) rig seems to put my voice on Line Out > regardless of > the front panel Monitor setting. I see in the manual a reference to > Config:Lin Out=PHONES but, the best I can tell, my rig has no such setting > in Lin Out (all I have are numeric settings). Its probably not the answer, > but the mismatch between the manual and what I understand of the rig tells > me there might be something important I have not learned. > > Why do I care? > I do headphone switching in software--multiple radio audio channels > and mic > audio are routed to a software mixer which reads those, and writes > multiple > channels to headphones and to a long term WAV file recording. I would > prefer > to use the USB Windows Recording device as the "received audio" input to > this mixer. But, for now, I am using an analog cable from the > "Speaker" jack > on the K3S back panel to a sound card because that is the only way I have > found to turn off the "monitor" function. That is, when I use the > all-digital path, I hear my own voice in my headphones and my brain just > won't deal with that gracefully. > > > > > -- > Sent from: http://elecraft.365791.n2.nabble.com/ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Re: turn off SSB monitor on Line Out?
|
|
I'll bet it could be made mode specific.
________________________________ From: Wayne, W5XD <[hidden email]> Sent: Sunday, September 24, 2017 5:12 PM To: [hidden email] Cc: Cady, Fred Subject: Re: [Elecraft] turn off SSB monitor on Line Out? Wow, that was a quick answer. The good news is that it eliminates the problem of "my own voice in my headphones" when operating SSB. The bad news is that it also eliminates CW sidetone. I am going to try it at "T=1" and see if I can hear the sidetone when I want it, and ignore my voice when I don't. Related question: I am new to the K3. I thought I read the manual. There is some reference material somewhere that I obviously have not read. Is there a URL for this hint? K3 MCU 5.58 / DSP 2.88 / FPF 1.26, 3-16-2017 On 9/24/2017 22:51, Cady, Fred wrote: Hi, K3 MCU 5.58 / DSP 2.88 / FPF 1.26, 3-16-2017 * TX LINE OUT (MONITOR) LEVEL NOW ADJUSTABLE: In CONFIG:LIN OUT menu entry, tap '2' (REV switch) to set the "T=" level (TX monitor). Tap '2' again to return to the RX LINE OUT setting. I haven't tried it but I would guess you just adjust it to zero. cheers, Fred KE7X For all KE7X Elecraft books, see www.ke7x.com<http://www.ke7x.com> ________________________________ From: [hidden email]<mailto:[hidden email]> <[hidden email]><mailto:[hidden email]> on behalf of w5xd <[hidden email]><mailto:[hidden email]> Sent: Sunday, September 24, 2017 2:52 PM To: [hidden email]<mailto:[hidden email]> Subject: [Elecraft] turn off SSB monitor on Line Out? Is there a menu entry to turn off the SSB monitor on Line Out? My (recent vintage K3S) rig seems to put my voice on Line Out regardless of the front panel Monitor setting. I see in the manual a reference to Config:Lin Out=PHONES but, the best I can tell, my rig has no such setting in Lin Out (all I have are numeric settings). Its probably not the answer, but the mismatch between the manual and what I understand of the rig tells me there might be something important I have not learned. Why do I care? I do headphone switching in software--multiple radio audio channels and mic audio are routed to a software mixer which reads those, and writes multiple channels to headphones and to a long term WAV file recording. I would prefer to use the USB Windows Recording device as the "received audio" input to this mixer. But, for now, I am using an analog cable from the "Speaker" jack on the K3S back panel to a sound card because that is the only way I have found to turn off the "monitor" function. That is, when I use the all-digital path, I hear my own voice in my headphones and my brain just won't deal with that gracefully. -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email]<mailto:[hidden email]> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
In reply to this post by w5xd
I thought TX Mon settings were per mode.
Sent from my iPhone ...nr4c. bill > On Sep 24, 2017, at 7:12 PM, Wayne, W5XD <[hidden email]> wrote: > > Wow, that was a quick answer. The good news is that it eliminates the > problem of "my own voice in my headphones" when operating SSB. The bad > news is that it also eliminates CW sidetone. I am going to try it at > "T=1" and see if I can hear the sidetone when I want it, and ignore my > voice when I don't. > > > Related question: > I am new to the K3. I thought I read the manual. There is some reference > material somewhere that I obviously have not read. Is there a URL for > this hint? *K3 MCU 5.58 / DSP 2.88 / FPF 1.26, 3-16-2017* > > > >> On 9/24/2017 22:51, Cady, Fred wrote: >> >> Hi, >> >> *K3 MCU 5.58 / DSP 2.88 / FPF 1.26, 3-16-2017* >> >> * * >> >> >> >> ** TX LINE OUT (MONITOR) LEVEL NOW ADJUSTABLE:*In CONFIG:LIN OUT menu >> entry, tap '2' (REV switch) to set the "T=" level (TX monitor). Tap >> '2' again to return to the RX LINE OUT setting. >> >> >> I haven't tried it but I would guess you just adjust it to zero. >> >> cheers, >> >> Fred KE7X >> >> >> For all KE7X Elecraft books, see www.ke7x.com <http://www.ke7x.com> >> >> >> > Wow, that was a quick answer. The good news is that it eliminates the > problem of "my own voice in my headphones" when operating SSB. The bad > news is that it also eliminates CW sidetone. I am going to try it at > "T=1" and see if I can hear the sidetone when I want it, and ignore my > voice when I don't. > > > Related question: > I am new to the K3. I thought I read the manual. There is some reference > material somewhere that I obviously have not read. Is there a URL for > this hint? *K3 MCU 5.58 / DSP 2.88 / FPF 1.26, 3-16-2017* > > > >> On 9/24/2017 22:51, Cady, Fred wrote: >> >> Hi, >> >> *K3 MCU 5.58 / DSP 2.88 / FPF 1.26, 3-16-2017* >> >> * * >> >> >> >> ** TX LINE OUT (MONITOR) LEVEL NOW ADJUSTABLE:*In CONFIG:LIN OUT menu >> entry, tap '2' (REV switch) to set the "T=" level (TX monitor). Tap >> '2' again to return to the RX LINE OUT setting. >> >> >> I haven't tried it but I would guess you just adjust it to zero. >> >> cheers, >> >> Fred KE7X >> >> >> For all KE7X Elecraft books, see www.ke7x.com <http://www.ke7x.com> >> >> >> >> ------------------------------------------------------------------------ >> *From:* [hidden email] >> <[hidden email]> on behalf of w5xd <[hidden email]> >> *Sent:* Sunday, September 24, 2017 2:52 PM >> *To:* [hidden email] >> *Subject:* [Elecraft] turn off SSB monitor on Line Out? >> >> Is there a menu entry to turn off the SSB monitor on Line Out? >> My (recent vintage K3S) rig seems to put my voice on Line Out >> regardless of >> the front panel Monitor setting. I see in the manual a reference to >> Config:Lin Out=PHONES but, the best I can tell, my rig has no such setting >> in Lin Out (all I have are numeric settings). Its probably not the answer, >> but the mismatch between the manual and what I understand of the rig tells >> me there might be something important I have not learned. >> >> Why do I care? >> I do headphone switching in software--multiple radio audio channels >> and mic >> audio are routed to a software mixer which reads those, and writes >> multiple >> channels to headphones and to a long term WAV file recording. I would >> prefer >> to use the USB Windows Recording device as the "received audio" input to >> this mixer. But, for now, I am using an analog cable from the >> "Speaker" jack >> on the K3S back panel to a sound card because that is the only way I have >> found to turn off the "monitor" function. That is, when I use the >> all-digital path, I hear my own voice in my headphones and my brain just >> won't deal with that gracefully. >> >> >> >> >> -- >> Sent from: http://elecraft.365791.n2.nabble.com/ >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [hidden email] > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |