Chris,
Indeed such a table does exist. It appears with the 'A to B' upgrade
instructions. I do not believe the table of firmware settings to be
recorded has ever been extracted from that document, but you can
download the full A to B instructions from the Elecraft website ->
http://www.elecraft.com/manual/k2a2binstr.pdfDepending on your current firmware level, the settings may be retained,
but in any case it is a REALLY GOOD IDEA to record your settings just in
case ...
73,
Don W3FPR
Chris Kantarjiev wrote:
> Installing KDSP2 has encouraged me to finally upgrade my firmware and IOC.
> That means that I have to "write down everything that might get destroyed"...
> but I don't see a good list of just what that might be!
>
> Suggestion to Elecraft: please add a fill-in-the-blanks table to
> the firmware instructions, to encourage owners to track down all the
> values.
>
> Question for everyone - is there such a table already out there? I wrote
> down all the top level menu settings and went through CAL FIL for
> four "modes" - CW, LSB, USB, CW REV - four filters each with two settings.
>
> Anything else?
>
> 73 de chris K6DBG
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
