Hello,
George Cutsogeorge W2VJN wrote a book "Managing Interstation Interference".
I have the 2nd edition and I believe there is a typo.
The author states he used his Elecraft K3 for his work; I had emailed the author quite awhile ago about this matter but got no response.
On pg 6 in para 1.3.2, W2VJN says at "... signal offset 20 kHz", he gets +5 dBm.
However, on pg 8 in Fig 1, he wrote 2 kHz at the +5 dBm level, .
I've read the K3 specs and t he way I interpret them, the typo is on pg 8 and should read 20 kHz.
I'd like someone to verify I'm not going off in a wrong direction here.
I'm giving a class on "dB uses" this month to our club and Figure 1 is in my presentation, so it needs to be correct.
BTW, the specs for the K3, as applies to dB, are featured in my presentation.
TIA for any replies.
.
73 Jerry KM3K
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
