vfo A & B set up

[John Campbell, Jr.]

My new, May 09, sn3012, K-3 works just fine. The following is how I would
like to set up vfo A & B, and so far I have been unable to do it " my way".
Either it is not possible, or I am just missing something in the manual
which at age 70 is more than likely the problem.

1.       Set up a 20 meter freq. in vfo A, (main) using ant #1.

2.       Set up a 6 meter freq. in vfo B ( sub) using ant #2.

 

If this is possible, than what I want to be able to do is work 20 mtrs,vfo
A, ant #1, and listen on 6 mtrs using the 6 mtr ant #2, not on the 20 mtr
ant on vfo A.

Also when working 6 mtrs on ant #2, I want to be able monitor 20 mtrs on ant
#1.

 

If this is possible, any help would be appreciated. One could answer here of
course, or direct to [hidden email].

My cell is 248-895-5085 just in case someone wants to call with info.

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html