When I tune my K2 in a carrier ( all HF bands excl. 160 mtrs ) I notice the
K2 SSB setting has an over 10 dB worse s/n.
I really mean worse s/n, no difference in audio ( gain ).
My calibrated HP 3335A generates the carriers.
My calibrated HP 8568B spectrum analyzer shows the the audio output S/N.
I also varied in numerous combinations the K2's IF and LF gain pots.
I tuned both SSB and CW for maximum signal strength ( not for the same
pitch.).
I guess this does exclude possible non matching filter- and/or bfo
alignments.
I used the same filterwidths for SSB and CW.
The S-meter shows no difference between SSB en CW ( I varied the carrier all
over S1 until 9+20 ).
What could be on ?
Thanks,
Peter, PE1E
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
