wsjtx-x drops receive signal and stops txing randomly

[MM0WXE]

I am using the latest ver of wsjtx-x in various modes can get it working well
with JT Bridge and MacLogger Dx.

After following a setup guide I worked and logged about 50 QSOs quite well.

Then the receive signal disappears  on the waterfall or meter reading in the
software.

The tx also disappears the radio goes into tx mode but no ALC or RF power.

I am probably missing something simple but have spent days trying to figure
it out without success.


Any help would be gratefully accepted.

Tony MM0WXE/KK6WXE



--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Peter Lambert]

First thing I'd check is that the PC hasn't decided that you really meant to
be using some other audio port and "done you a favour".  Evil things, PC's.

73's Peter VK4JD

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of 2M0TGN
Sent: Friday, 2 February 2018 4:49 AM
To: [hidden email]
Subject: [Elecraft] wsjtx-x drops receive signal and stops txing randomly

I am using the latest ver of wsjtx-x in various modes can get it working
well with JT Bridge and MacLogger Dx.

After following a setup guide I worked and logged about 50 QSOs quite well.

Then the receive signal disappears  on the waterfall or meter reading in the
software.

The tx also disappears the radio goes into tx mode but no ALC or RF power.

I am probably missing something simple but have spent days trying to figure
it out without success.


Any help would be gratefully accepted.

Tony MM0WXE/KK6WXE



--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[tomb18]

Hi,
You need to look in WSJT-X in the Settings, Audio and make sure that the
Input and Output devices are set correctly.
If they are, then look at the Radio settings to make sure that it is using
line in and line out appropriately.
73

-----Original Message-----
From: Peter Lambert
Sent: Friday, February 2, 2018 10:00 PM
To: '2M0TGN' ; [hidden email]
Subject: Re: [Elecraft] wsjtx-x drops receive signal and stops txing
randomly

First thing I'd check is that the PC hasn't decided that you really meant to
be using some other audio port and "done you a favour".  Evil things, PC's.

73's Peter VK4JD

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of 2M0TGN
Sent: Friday, 2 February 2018 4:49 AM
To: [hidden email]
Subject: [Elecraft] wsjtx-x drops receive signal and stops txing randomly

I am using the latest ver of wsjtx-x in various modes can get it working
well with JT Bridge and MacLogger Dx.

After following a setup guide I worked and logged about 50 QSOs quite well.

Then the receive signal disappears  on the waterfall or meter reading in the
software.

The tx also disappears the radio goes into tx mode but no ALC or RF power.

I am probably missing something simple but have spent days trying to figure
it out without success.


Any help would be gratefully accepted.

Tony MM0WXE/KK6WXE



--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Howard Stephenson - K6IA]

It's a bug, it not only happens with my K3 intermittently ( I lose TX audo)
but it's also been reported with other rigs in their Yahoo Groups.
<https://groups.yahoo.com/neo/groups/wsjtgroup/info>

73,
Howard Stephenson K6IA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]