1.5" tilt stand?

[Jim AB3CV]

I saw a note on this list about a smaller tilt stand. I've got a recent K2
with the standard bail on it. Does this 1.5" tilt stand replace the standard
bail and is lower?

My bail measures neither 3" or 1.5" at the bail and something less than 3"
at the front of the K2 so I'm confused.

73

jim ab3cv

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Tom Zeltwanger]

Jim,

I was saying that the standard one is too high for me. Then I was told that
there is a 1.5" stand available on the Elecraft Web site. Just go the their
ordering page and look at the K2 accesories. I already ordered one.

73,

Tom KG3V



Quoting Jim Miller <[hidden email]>:

> I saw a note on this list about a smaller tilt stand. I've got a recent K2
> with the standard bail on it. Does this 1.5" tilt stand replace the standard
>
> bail and is lower?
>
> My bail measures neither 3" or 1.5" at the bail and something less than 3"
> at the front of the K2 so I'm confused.
>
> 73
>
> jim ab3cv
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft   
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-3]

Jim,

How about "half height tilt stand" rather than getting hung up on
specific dimensions.  It will lower the K2 to about 1/2 the height of
the standard tilt bail.  I have not measured it, so I can't give you the
precise dimensions.

73,
Don W3FPR

Jim Miller wrote:

> I saw a note on this list about a smaller tilt stand. I've got a recent K2
> with the standard bail on it. Does this 1.5" tilt stand replace the standard
> bail and is lower?
>
> My bail measures neither 3" or 1.5" at the bail and something less than 3"
> at the front of the K2 so I'm confused.
>
> 73
>
> jim ab3cv
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft   
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Jim AB3CV]

good enuf!

thanks, Don!

another thing for my next Elecraft order!

73

jim ab3cv

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com