90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE

classic Classic list List threaded Threaded
8 messages Options
Reply | Threaded
Open this post in threaded view
|

90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE

Bill K9YEQ
I have 90' of Andrew Heliax with connectors, never mounted, brand new in
boxes. I am selling as I do not plan on using.  These connectors are N type.
They run ~$27 apiece.  They are the complete installation kits that include
the installation instructions and parts.  This stuff runs $3.18 a foot.
Total is value from manufacturer is ~$350 not including boxing and shipping.
I will sell CONUS for $270 boxed and shipped.[WJ]  Or will match any
advertised price of equal specs. In new condx.

73,
Bill
K9YEQ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE

Jim Brown-10
FWIW -- I've bought a lot of used hard line, and I've never paid more
than a buck a foot for cut lengths of 1/2-in hard line in good or even
new condition. About five years ago, I paid $100 for 100 ft of LDF4-50
(1/2-in Andrew) brand new. Don't remember if it had connectors on it or
if I bought them separately.

73, Jim K9YC

On Thu,1/26/2017 2:48 PM, Bill Johnson wrote:
> I have 90' of Andrew Heliax with connectors, never mounted, brand new in
> boxes. I am selling as I do not plan on using.  These connectors are N type.
> They run ~$27 apiece.  They are the complete installation kits that include
> the installation instructions and parts.  This stuff runs $3.18 a foot.
> Total is value from manufacturer is ~$350 not including boxing and shipping.
> I will sell CONUS for $270 boxed and shipped.[WJ]  Or will match any
> advertised price of equal specs. In new condx.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE

Bill K9YEQ
Jim,  Thanks.  Can you buy this Heliax now for $1 per foot? This the stuff
you mention.  The connectors are Andrews as well and are kits to install.  I
don't remember what I paid but may have been about what you did.  The
connectors were another story.  I lucked out with them.  They appear to be
lower in price.  I will match whatever someone comes up with and can give me
a link to verify.  This is excess to my needs and all I want is fair price.
This would only be useful for UHF and higher unless you are talking max
power and low loss.  

73,
Bill
K9YEQ

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of Jim
Brown
Sent: Thursday, January 26, 2017 5:18 PM
To: [hidden email]
Subject: Re: [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new
in box connectors FOR SALE

FWIW -- I've bought a lot of used hard line, and I've never paid more than a
buck a foot for cut lengths of 1/2-in hard line in good or even new
condition. About five years ago, I paid $100 for 100 ft of LDF4-50 (1/2-in
Andrew) brand new. Don't remember if it had connectors on it or if I bought
them separately.

73, Jim K9YC

On Thu,1/26/2017 2:48 PM, Bill Johnson wrote:
> I have 90' of Andrew Heliax with connectors, never mounted, brand new
> in boxes. I am selling as I do not plan on using.  These connectors are N
type.
> They run ~$27 apiece.  They are the complete installation kits that
> include the installation instructions and parts.  This stuff runs $3.18 a
foot.
> Total is value from manufacturer is ~$350 not including boxing and
shipping.
> I will sell CONUS for $270 boxed and shipped.[WJ]  Or will match any
> advertised price of equal specs. In new condx.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: 1 5/8 inch hard line FOR SALE

Richard Fjeld-2
FWIW, I have two pieces of 1 5/8 inch hard line that are new, and have
been stored in-doors.  As near as I can determine without uncoiling it,
I calculate about 75 feet for each piece.  I was planning to make my own
connectors, but I have not had an application that would utilize the
hard line's low loss. And, I'm too old to do it now. As you may know,
for a size comparison, a piece of RG8 easily slips into the center
conductor with room to spare.

I would sell it, but not try to ship it.  I suggest a buyer would pick
it up in person.  I live in west central Minnesota.  I don't remember
the brand name if that matters.
I could see what it says on the cable.  The copper itself must have
considerable value.  A person can't go wrong if we agree on a win-win price.

Dick, n0ce


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE

David Gilbert
In reply to this post by Bill K9YEQ


Well, the FSJ4 is the super flexible stuff that does indeed cost more
than the normal LDF4, but current prices seem to range all over the
place per a few links below.

https://www.rfparts.com/coax/heliaxcoax/heliax-12inch/fsj4-50b.html 
(highest price I found ... no surprise)

https://www.theantennafarm.com/catalog/commscope-fsj4-50b-1485.html?zenid=afb359fa79faa62a04d602a4829b793b

http://www.txmstore.com/rf-coax-cable/foam-corrugated-cable/super-flex-1-2-coax/ 
      (lowest price I found)

73,
Dave   AB7E




On 1/26/2017 4:24 PM, Bill Johnson wrote:

> Jim,  Thanks.  Can you buy this Heliax now for $1 per foot? This the stuff
> you mention.  The connectors are Andrews as well and are kits to install.  I
> don't remember what I paid but may have been about what you did.  The
> connectors were another story.  I lucked out with them.  They appear to be
> lower in price.  I will match whatever someone comes up with and can give me
> a link to verify.  This is excess to my needs and all I want is fair price.
> This would only be useful for UHF and higher unless you are talking max
> power and low loss.
>
> 73,
> Bill
> K9YEQ
>
> -----Original Message-----
> From: Elecraft [mailto:[hidden email]] On Behalf Of Jim
> Brown
> Sent: Thursday, January 26, 2017 5:18 PM
> To: [hidden email]
> Subject: Re: [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new
> in box connectors FOR SALE
>
> FWIW -- I've bought a lot of used hard line, and I've never paid more than a
> buck a foot for cut lengths of 1/2-in hard line in good or even new
> condition. About five years ago, I paid $100 for 100 ft of LDF4-50 (1/2-in
> Andrew) brand new. Don't remember if it had connectors on it or if I bought
> them separately.
>
> 73, Jim K9YC
>
> On Thu,1/26/2017 2:48 PM, Bill Johnson wrote:
>> I have 90' of Andrew Heliax with connectors, never mounted, brand new
>> in boxes. I am selling as I do not plan on using.  These connectors are N
> type.
>> They run ~$27 apiece.  They are the complete installation kits that
>> include the installation instructions and parts.  This stuff runs $3.18 a
> foot.
>> Total is value from manufacturer is ~$350 not including boxing and
> shipping.
>> I will sell CONUS for $270 boxed and shipped.[WJ]  Or will match any
>> advertised price of equal specs. In new condx.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html Message
> delivered to [hidden email]
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE

Bill K9YEQ
Great references.  The manufacturer is not listed on the low cost stuff. I
have Andrews Heliax I would imaging you could easily manufacture similar
over seas but I would not trust quality.  If use the stuff then the correct
manufacturer and quality, to me, would be a biggie.  That is why I bought
this vs. copycat, knock off.  

73,
Bill
K9YEQ

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of David
Gilbert
Sent: Thursday, January 26, 2017 6:12 PM
To: [hidden email]
Subject: Re: [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new
in box connectors FOR SALE



Well, the FSJ4 is the super flexible stuff that does indeed cost more than
the normal LDF4, but current prices seem to range all over the place per a
few links below.

https://www.rfparts.com/coax/heliaxcoax/heliax-12inch/fsj4-50b.html
(highest price I found ... no surprise)

https://www.theantennafarm.com/catalog/commscope-fsj4-50b-1485.html?zenid=af
b359fa79faa62a04d602a4829b793b

http://www.txmstore.com/rf-coax-cable/foam-corrugated-cable/super-flex-1-2-c
oax/
      (lowest price I found)

73,
Dave   AB7E




On 1/26/2017 4:24 PM, Bill Johnson wrote:
> Jim,  Thanks.  Can you buy this Heliax now for $1 per foot? This the
> stuff you mention.  The connectors are Andrews as well and are kits to
> install.  I don't remember what I paid but may have been about what
> you did.  The connectors were another story.  I lucked out with them.  
> They appear to be lower in price.  I will match whatever someone comes
> up with and can give me a link to verify.  This is excess to my needs and
all I want is fair price.

> This would only be useful for UHF and higher unless you are talking
> max power and low loss.
>
> 73,
> Bill
> K9YEQ
>
> -----Original Message-----
> From: Elecraft [mailto:[hidden email]] On Behalf Of
> Jim Brown
> Sent: Thursday, January 26, 2017 5:18 PM
> To: [hidden email]
> Subject: Re: [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2
> F4PNM new in box connectors FOR SALE
>
> FWIW -- I've bought a lot of used hard line, and I've never paid more
> than a buck a foot for cut lengths of 1/2-in hard line in good or even
> new condition. About five years ago, I paid $100 for 100 ft of LDF4-50
> (1/2-in
> Andrew) brand new. Don't remember if it had connectors on it or if I
> bought them separately.
>
> 73, Jim K9YC
>
> On Thu,1/26/2017 2:48 PM, Bill Johnson wrote:
>> I have 90' of Andrew Heliax with connectors, never mounted, brand new
>> in boxes. I am selling as I do not plan on using.  These connectors
>> are N
> type.
>> They run ~$27 apiece.  They are the complete installation kits that
>> include the installation instructions and parts.  This stuff runs
>> $3.18 a
> foot.
>> Total is value from manufacturer is ~$350 not including boxing and
> shipping.
>> I will sell CONUS for $270 boxed and shipped.[WJ]  Or will match any
>> advertised price of equal specs. In new condx.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html Message delivered to
> [hidden email]
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html Message delivered to
> [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE

Bill K9YEQ
Pathetic typing and forget error correction.  I was typing on another device
with poor vision... My stuff is original manufacturer, not knock off.
Quality is superb.  And never used.  Make a reasonalbe offer, it's yours!
(even against internet junk)

73,
Bill
K9YEQ

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of Bill
Johnson
Sent: Thursday, January 26, 2017 7:12 PM
To: 'David Gilbert' <[hidden email]>; [hidden email]
Subject: Re: [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new
in box connectors FOR SALE

Great references.  The manufacturer is not listed on the low cost stuff. I
have Andrews Heliax I would imaging you could easily manufacture similar
over seas but I would not trust quality.  If use the stuff then the correct
manufacturer and quality, to me, would be a biggie.  That is why I bought
this vs. copycat, knock off.  

73,
Bill
K9YEQ

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of David
Gilbert
Sent: Thursday, January 26, 2017 6:12 PM
To: [hidden email]
Subject: Re: [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new
in box connectors FOR SALE



Well, the FSJ4 is the super flexible stuff that does indeed cost more than
the normal LDF4, but current prices seem to range all over the place per a
few links below.

https://www.rfparts.com/coax/heliaxcoax/heliax-12inch/fsj4-50b.html
(highest price I found ... no surprise)

https://www.theantennafarm.com/catalog/commscope-fsj4-50b-1485.html?zenid=af
b359fa79faa62a04d602a4829b793b

http://www.txmstore.com/rf-coax-cable/foam-corrugated-cable/super-flex-1-2-c
oax/
      (lowest price I found)

73,
Dave   AB7E




On 1/26/2017 4:24 PM, Bill Johnson wrote:
> Jim,  Thanks.  Can you buy this Heliax now for $1 per foot? This the
> stuff you mention.  The connectors are Andrews as well and are kits to
> install.  I don't remember what I paid but may have been about what
> you did.  The connectors were another story.  I lucked out with them.
> They appear to be lower in price.  I will match whatever someone comes
> up with and can give me a link to verify.  This is excess to my needs
> and
all I want is fair price.

> This would only be useful for UHF and higher unless you are talking
> max power and low loss.
>
> 73,
> Bill
> K9YEQ
>
> -----Original Message-----
> From: Elecraft [mailto:[hidden email]] On Behalf Of
> Jim Brown
> Sent: Thursday, January 26, 2017 5:18 PM
> To: [hidden email]
> Subject: Re: [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2
> F4PNM new in box connectors FOR SALE
>
> FWIW -- I've bought a lot of used hard line, and I've never paid more
> than a buck a foot for cut lengths of 1/2-in hard line in good or even
> new condition. About five years ago, I paid $100 for 100 ft of LDF4-50
> (1/2-in
> Andrew) brand new. Don't remember if it had connectors on it or if I
> bought them separately.
>
> 73, Jim K9YC
>
> On Thu,1/26/2017 2:48 PM, Bill Johnson wrote:
>> I have 90' of Andrew Heliax with connectors, never mounted, brand new
>> in boxes. I am selling as I do not plan on using.  These connectors
>> are N
> type.
>> They run ~$27 apiece.  They are the complete installation kits that
>> include the installation instructions and parts.  This stuff runs
>> $3.18 a
> foot.
>> Total is value from manufacturer is ~$350 not including boxing and
> shipping.
>> I will sell CONUS for $270 boxed and shipped.[WJ]  Or will match any
>> advertised price of equal specs. In new condx.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html Message delivered to
> [hidden email]
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html Message delivered to
> [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE

Richard Lamont
In reply to this post by Bill K9YEQ
On 26/01/17 22:48, Bill Johnson wrote:
> I have 90' of Andrew Heliax with connectors, never mounted, brand new in
> boxes. I am selling as I do not plan on using.

Why are you posting this on the Elecraft list? It's nothing at all to do
with Elecraft. How are people supposed to filter their information flow
if people just splatter anything anywhere?


73,
Richard G4DYA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]