A Macro to switch data modes

[Peter Chamalian W1RM]

Has anyone created a macro to change the K3S from RTTY to FT-8?  

 

 

Pete, W1RM

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Joe Subich, W4TV-4]

Try DT0;  (FSK_D -> AFSK_A)
and DT2;  (AFSK_A -> FSK_D)

The information is available in the K3&KX3 Programmers Reference.

73,

    ... Joe, W4TV


On 8/7/2017 8:46 AM, Peter Chamalian wrote:

> Has anyone created a macro to change the K3S from RTTY to FT-8?
>
>  
>
>  
>
> Pete, W1RM
>
>  
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[NK7Z]

Hi Peter,

Take a look at:

http://nk7z.net/adding-external-keypad-k3/

That is a short article on using an external keypad on a K3/P3
combination, giving you one button macro launching capabilities.

About halfway down is a link to a spreadsheet of macros.  Download the
spreadsheet, and there is a macro there to move a K3/P3 to DATA A mode,
which I assume is the correct mode for FT8.

Here is the Macro in the event you don't want to look at the article:

MD6;DT0;IS 1500;BW0400;

Here is the breakout of what each element does:
MD6: Changes to DATA
DT0: Sets DATA A
IS 1500: Sets the IF shift to 1500
BW0400: Sets the band width to 4K

Hope this helps...  I am sure there are many ways to do this
.
73s and thanks,
Dave
NK7Z
http://www.nk7z.net

On 08/07/2017 05:46 AM, Peter Chamalian wrote:

> Has anyone created a macro to change the K3S from RTTY to FT-8?
>
>  
>
>  
>
> Pete, W1RM
>
>  
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]