AO-7 operation with K3?

[William Hein-3]

I'd like to work AO-7 with my K3.  I have the 2m module.  AO-7 Mode A is 2m
up and 10m down.  Any way to unmute the K3 rx during tx periods so I can
hear my downlink?

Sold my TS-2000x and FT-847 back around the time I bought the K3 thus the
K3 is my only VHF capable rig for the moment.

73
Bill AA7XT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Lyle Johnson]

The K3 does not support cross-band full-duplex operation.

73,

Lyle KK7P

> I'd like to work AO-7 with my K3.  I have the 2m module.  AO-7 Mode A is 2m
> up and 10m down.  Any way to unmute the K3 rx during tx periods so I can
> hear my downlink?

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[nels.nelsen_NE7LS]

What if the K3 had the 2nd RX Option? Then could the second RX stay on HF
while the other did the VHF?
On Dec 5, 2012 7:56 AM, "Lyle Johnson" <[hidden email]> wrote:

> The K3 does not support cross-band full-duplex operation.
>
> 73,
>
> Lyle KK7P
>
>  I'd like to work AO-7 with my K3.  I have the 2m module.  AO-7 Mode A is
>> 2m
>> up and 10m down.  Any way to unmute the K3 rx during tx periods so I can
>> hear my downlink?
>>
>
> ______________________________**______________________________**__
> Elecraft mailing list
> Home: http://mailman.qth.net/**mailman/listinfo/elecraft<http://mailman.qth.net/mailman/listinfo/elecraft>
> Help: http://mailman.qth.net/mmfaq.**htm<http://mailman.qth.net/mmfaq.htm>
> Post: mailto:[hidden email].**net <[hidden email]>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[alorona]

Unfortunately not, Bill.
 
Probably the only serious transceiver out there that does full-duplex (rx on
while transmit) is the Sienna. I believe it supports transverters, so this may
make it popular with the satellite guys. Full-duplex is really awesome, a new
experience very much like listening in diversity for the first time.
 
Al  W6LX 






________________________________
From: William Hein <[hidden email]>
To: [hidden email]
Sent: Wed, December 5, 2012 7:39:56 AM
Subject: [Elecraft] AO-7 operation with K3?

I'd like to work AO-7 with my K3.  I have the 2m module.  AO-7 Mode A is 2m
up and 10m down.  Any way to unmute the K3 rx during tx periods so I can
hear my downlink?

Sold my TS-2000x and FT-847 back around the time I bought the K3 thus the
K3 is my only VHF capable rig for the moment.

73
Bill AA7XT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Edward R Cole]

I obvious solution is to use a second receiver (I do not mean in the K3).

I plan to operate satellite using my KX3 on 2m and K3 on other bands.

e.g.  KX3+KX3-2M can either receive or transmit on 2m
Using a transverter with the K3 one can transmit or receive on 435 or
higher bands.  The K3 can receive AO-7 on ten meters.

73, Ed - KL7UW

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html