AX1 Whip length (extended)

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

AX1 Whip length (extended)

Heinz Baertschi
The length of the AX1 whip (extended) is specified in all documents as 45"
(115 cm).
Can someone please confirm what is correct, 45" or 115 cm?

73 tks,
Heinz HB9BCB



--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: AX1 Whip length (extended)

Jay Rutherford-3
It is 46.5 inches, or 118 cm.

73 Jay K3BH


On Sun, May 17, 2020, at 09:39, Heinz Baertschi wrote:

> The length of the AX1 whip (extended) is specified in all documents as 45"
> (115 cm).
> Can someone please confirm what is correct, 45" or 115 cm?
>
> 73 tks,
> Heinz HB9BCB
>
>
>
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: AX1 Whip length (extended)

Jay Rutherford-3
That length of 46.5 is for the whip itself. When inserted onto the antenna base, the whip measures 46 inches.

73 Jay K3BH

On Sun, May 17, 2020, at 09:45, Jay Rutherford wrote:
> It is 46.5 inches, or 118 cm.
>
> 73 Jay K3BH
>
>
> On Sun, May 17, 2020, at 09:39, Heinz Baertschi wrote:
> > The length of the AX1 whip (extended) is specified in all documents as 45"
> > (115 cm).
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: AX1 Whip length (extended)

Bill Frantz
In reply to this post by Heinz Baertschi
I measured mine using a cloth tape made for sewing and knitting.
I got 46.5" 118 cm.
Note that these tapes may stretch slightly, so these
measurements aren't accurate to the nearest mm.

73 Bill AE6JV

On 5/17/20 at 9:39 AM, [hidden email] (Heinz
Baertschi) wrote:

>The length of the AX1 whip (extended) is specified in all documents as 45"
>(115 cm).
>Can someone please confirm what is correct, 45" or 115 cm?

---------------------------------------------------------------------------
Bill Frantz        | Re IOT: "How many access control systems
does it take
www.pwpconsult.com | to change a light bulb?" - Dean Tribble

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: AX1 Whip length (extended)

Heinz Baertschi
In reply to this post by Heinz Baertschi
Sorry,
That was a quick shot due to a false alarm - I had not put on my reading
glasses when reading on the calculator - and I was wrong by about 40
cm...for shame.

73,
Heinz HB9BCB



Heinz Baertschi wrote

> The length of the AX1 whip (extended) is specified in all documents as 45"
> (115 cm).
> Can someone please confirm what is correct, 45" or 115 cm?
>
> 73 tks,
> Heinz HB9BCB
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:

> Elecraft@.qth

>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to

> lists+1215531472858-365791@.nabble





--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]