Elecraft

About to give up

Classic

List

Threaded

17 messages Options

Richard W Hemingway

About to give up

Hi,
I am about to give up on my K3S and PSK with my Fldigi on my Mac computer. I am unable to connect either with the SignaLink or with a straight USK connection. Neither will cause the TX light to come on or TX! I have never had t his problem before on any of my Rigs, or before when I owned a K3. Joe tried your hamlib as well as the Rig Cat settings sent to me from Elecraft. No go.???
If anyone has any bright ideas please let me know. This should be keying the K3S but it is not. Have I sset something that would block t his?
All have a great Memorial weekend, remembering our fallen..
Take care,
Dick. N5XRD
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Don Wilhelm

Re: About to give up

Dick,

Do you have sound coming out of the SignaLink? Connect it to an audio
amplifier and listen - if you hear tones, things should work.
If the SignaLink produces tones, does it activate the PTT output - test
with your ohmmeter, it should measure a very high resistance (even
infinity) with no tones produced and near zero ohms when tones are present.
Yes, I am thinking you may have a bad SignaLink, so test it to be sure
it is doing its job.

I assume you are plugging the SignaLink into the line-in jack on the
K3S. Have you set the data mode MIC SEL menu to LINE IN?

If the SignaLink makes tones, try using VOX in the K3S - it should go
into transmit when tones are received.
If the SignaLink does not produce tones, try the output of another
soundcard.

Why are you using the SignaLink instead of the built-in USB CODEC in the
K3S? The SignaLink only further complicates things. If you do use the
USB CODEC, make certain nothing is plugged into the K3S LINE IN jack.

73,
Don W3FPR

On 5/28/2016 3:22 PM, Richard W Hemingway wrote:
> Hi,
> I am about to give up on my K3S and PSK with my Fldigi on my Mac computer. I am unable to connect either with the SignaLink or with a straight USK connection. Neither will cause the TX light to come on or TX! I have never had t his problem before on any of my Rigs, or before when I owned a K3. Joe tried your hamlib as well as the Rig Cat settings sent to me from Elecraft. No go.???
> If anyone has any bright ideas please let me know. This should be keying the K3S but it is not. Have I sset something that would block t his?
> All have a great Memorial weekend, remembering our fallen..
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Jim Rodenkirch

Re: About to give up

CONTENTS DELETED

The author has deleted this message.

Rick WA6NHC-2

Re: About to give up

In reply to this post by Don Wilhelm

I STRONGLY suggest that you do NOT rely on the PTT from the SignaLink at
all, ever, no way, uh uh, fuggedaboudit, nyet. You have to use the full
audio drive of the SLUSB to trip it's VOX, which is still not reliable.

If you cannot use a CAT (computer) for PTT, then the rig VOX is your
only answer.

Computer driver (Codec 'speaker') set to MAX, SLUSB set to painted lines
on top (DLY set full counter-clockwise), then:

Set the rig audio (Lin In) to the correct level (data A mode, 4 bars
lit, 5th 'tickled') then adjust the rig VOX to be reliable with that.

You should be golden at that point.

73,
Rick nhc

On 5/28/2016 12:59 PM, Don Wilhelm wrote:

> Dick,
>
> Do you have sound coming out of the SignaLink? Connect it to an audio
> amplifier and listen - if you hear tones, things should work.
> If the SignaLink produces tones, does it activate the PTT output -
> test with your ohmmeter, it should measure a very high resistance
> (even infinity) with no tones produced and near zero ohms when tones
> are present.
> Yes, I am thinking you may have a bad SignaLink, so test it to be sure
> it is doing its job.
>
> I assume you are plugging the SignaLink into the line-in jack on the
> K3S. Have you set the data mode MIC SEL menu to LINE IN?
>
> If the SignaLink makes tones, try using VOX in the K3S - it should go
> into transmit when tones are received.
> If the SignaLink does not produce tones, try the output of another
> soundcard.
>
> Why are you using the SignaLink instead of the built-in USB CODEC in
> the K3S? The SignaLink only further complicates things. If you do
> use the USB CODEC, make certain nothing is plugged into the K3S LINE
> IN jack.
>
> 73,
> Don W3FPR
>
> On 5/28/2016 3:22 PM, Richard W Hemingway wrote:
>> Hi,
>> I am about to give up on my K3S and PSK with my Fldigi on my Mac
>> computer. I am unable to connect either with the SignaLink or with a
>> straight USK connection. Neither will cause the TX light to come on
>> or TX! I have never had t his problem before on any of my Rigs, or
>> before when I owned a K3. Joe tried your hamlib as well as the Rig
>> Cat settings sent to me from Elecraft. No go.???
>> If anyone has any bright ideas please let me know. This should be
>> keying the K3S but it is not. Have I sset something that would
>> block t his?
>> All have a great Memorial weekend, remembering our fallen..
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

Ken Arck

Re: About to give up

I can't speak to the Mac part but it was a bit of a learning curve
(and I VERY computer literate - heck I code!) to get my K3S working
smoothly with several different software applications but now
everything - audio in/out, PTT and CAT commands are all handled
through one USB cable.

It's magic!

Ken

At 04:52 PM 5/28/2016, Rick WA6NHC wrote:

>I STRONGLY suggest that you do NOT rely on the PTT from the
>SignaLink at all, ever, no way, uh uh, fuggedaboudit, nyet. You
>have to use the full audio drive of the SLUSB to trip it's VOX,
>which is still not reliable.
>
>If you cannot use a CAT (computer) for PTT, then the rig VOX is your
>only answer.
>
>Computer driver (Codec 'speaker') set to MAX, SLUSB set to painted
>lines on top (DLY set full counter-clockwise), then:
>
>Set the rig audio (Lin In) to the correct level (data A mode, 4 bars
>lit, 5th 'tickled') then adjust the rig VOX to be reliable with that.
>
>You should be golden at that point.
>
>73,
>Rick nhc
>
>
>On 5/28/2016 12:59 PM, Don Wilhelm wrote:
>>Dick,
>>
>>Do you have sound coming out of the SignaLink? Connect it to an
>>audio amplifier and listen - if you hear tones, things should work.
>>If the SignaLink produces tones, does it activate the PTT output -
>>test with your ohmmeter, it should measure a very high resistance
>>(even infinity) with no tones produced and near zero ohms when
>>tones are present.
>>Yes, I am thinking you may have a bad SignaLink, so test it to be
>>sure it is doing its job.
>>
>>I assume you are plugging the SignaLink into the line-in jack on
>>the K3S. Have you set the data mode MIC SEL menu to LINE IN?
>>
>>If the SignaLink makes tones, try using VOX in the K3S - it should
>>go into transmit when tones are received.
>>If the SignaLink does not produce tones, try the output of another soundcard.
>>
>>Why are you using the SignaLink instead of the built-in USB CODEC
>>in the K3S? The SignaLink only further complicates things. If you
>>do use the USB CODEC, make certain nothing is plugged into the K3S
>>LINE IN jack.
>>
>>73,
>>Don W3FPR
>>
>>On 5/28/2016 3:22 PM, Richard W Hemingway wrote:
>>>Hi,
>>>I am about to give up on my K3S and PSK with my Fldigi on my Mac
>>>computer. I am unable to connect either with the SignaLink or
>>>with a straight USK connection. Neither will cause the TX light
>>>to come on or TX! I have never had t his problem before on any
>>>of my Rigs, or before when I owned a K3. Joe tried your hamlib
>>>as well as the Rig Cat settings sent to me from Elecraft. No go.???
>>>If anyone has any bright ideas please let me know. This should
>>>be keying the K3S but it is not. Have I sset something that
>>>would block t his?
>>>All have a great Memorial weekend, remembering our fallen..
>>
>>______________________________________________________________
>>Elecraft mailing list
>>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>Help: http://mailman.qth.net/mmfaq.htm
>>Post: mailto:[hidden email]
>>
>>This list hosted by: http://www.qsl.net
>>Please help support this email list: http://www.qsl.net/donate.html
>>Message delivered to [hidden email]
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to [hidden email]

------------------------------------------------------------------------------
President and CTO - Arcom Communications
Makers of repeater controllers and accessories.
http://www.arcomcontrollers.com/
Authorized Dealers for Kenwood and Telewave and
we offer complete repeater packages!
AH6LE/R - IRLP Node 3000
http://www.irlp.net
"We don't just make 'em. We use 'em!"

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Jeff Herr

Beep

In reply to this post by Rick WA6NHC-2

In regard to the Elecraft Frequency Memory Editor:

When using the QSY capability the KX3 does a beep.

When I am up late at night this is problematic.

Is there a way to turn off the "beep"

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

James Bennett

Re: About to give up

In reply to this post by Richard W Hemingway

Dick,

By any chance have you in the past few weeks upgraded your mac to El Capitan? I had a working system (K3, FLDIGI, WSJT-X) and silly me, upgraded to El Capitan and a subsequent follow-on update. It has completely broken my digital mode operating. The audio is now routed to the internal iMac speakers - no matter what I’ve put in the settings of either piece of software. Needless to say, with the audio going to the speakers instead of to the K3, it never goes into transmit. Apple has really screwed up things this time. I’ve since moved my digital operation off of the iMac and over to a Raspberry Pi 3 where WSJT-X is working just fine. Havent’ had time to mess with FLDIGI over there yet, but maybe next week.

Just a thought…….

Jim, W6JHB

> On Saturday, May 28, 2016, at Saturday, 12:22 PM, Richard W Hemingway <[hidden email]> wrote:
>
> Hi,
> I am about to give up on my K3S and PSK with my Fldigi on my Mac computer. I am unable to connect either with the SignaLink or with a straight USK connection. Neither will cause the TX light to come on or TX! I have never had t his problem before on any of my Rigs, or before when I owned a K3. Joe tried your hamlib as well as the Rig Cat settings sent to me from Elecraft. No go.???
> If anyone has any bright ideas please let me know. This should be keying the K3S but it is not. Have I sset something that would block t his?
> All have a great Memorial weekend, remembering our fallen..
> Take care,
> Dick. N5XRD
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

Phil Wheeler-2

Re: About to give up

Jim (and perhaps Dick),

Then go to System Preferences > Sound > Output and
select the external USB device you want the as the
destination for your audio output. You have to do
this in OS X, not in the application software.

73, Phil W7OX

On 5/28/16 7:49 PM, James Bennett wrote:

> Dick,
>
> By any chance have you in the past few weeks upgraded your mac to El Capitan? I had a working system (K3, FLDIGI, WSJT-X) and silly me, upgraded to El Capitan and a subsequent follow-on update. It has completely broken my digital mode operating. The audio is now routed to the internal iMac speakers - no matter what I’ve put in the settings of either piece of software. Needless to say, with the audio going to the speakers instead of to the K3, it never goes into transmit. Apple has really screwed up things this time. I’ve since moved my digital operation off of the iMac and over to a Raspberry Pi 3 where WSJT-X is working just fine. Havent’ had time to mess with FLDIGI over there yet, but maybe next week.
>
> Just a thought…….
>
> Jim, W6JHB
>
>
>> On Saturday, May 28, 2016, at Saturday, 12:22 PM, Richard W Hemingway <[hidden email]> wrote:
>>
>> Hi,
>> I am about to give up on my K3S and PSK with my Fldigi on my Mac computer. I am unable to connect either with the SignaLink or with a straight USK connection. Neither will cause the TX light to come on or TX! I have never had t his problem before on any of my Rigs, or before when I owned a K3. Joe tried your hamlib as well as the Rig Cat settings sent to me from Elecraft. No go.???
>> If anyone has any bright ideas please let me know. This should be keying the K3S but it is not. Have I sset something that would block t his?
>> All have a great Memorial weekend, remembering our fallen..
>> Take care,
>> Dick. N5XRD

Phil Wheeler-2

Re: About to give up

Adding to what I said below: You do System
Preferences > Sound > Input if you want your audio
input to come from an external USB device (Griffin
iMic, SignalinkUSB, K3s, etc.).

I am running OS X 10.11.5 and just tested this
with an iMic I happened to have with me.

73, Phil W7OX

On 5/28/16 8:18 PM, Phil Wheeler wrote:

> Jim (and perhaps Dick),
>
> Then go to System Preferences > Sound > Output
> and select the external USB device you want the
> as the destination for your audio output. You
> have to do this in OS X, not in the application
> software.
>
> 73, Phil W7OX
>
>
>
> On 5/28/16 7:49 PM, James Bennett wrote:
>> Dick,
>>
>> By any chance have you in the past few weeks
>> upgraded your mac to El Capitan? I had a
>> working system (K3, FLDIGI, WSJT-X) and silly
>> me, upgraded to El Capitan and a subsequent
>> follow-on update. It has completely broken my
>> digital mode operating. The audio is now routed
>> to the internal iMac speakers - no matter what
>> I’ve put in the settings of either piece of
>> software. Needless to say, with the audio going
>> to the speakers instead of to the K3, it never
>> goes into transmit. Apple has really screwed up
>> things this time. I’ve since moved my digital
>> operation off of the iMac and over to a
>> Raspberry Pi 3 where WSJT-X is working just
>> fine. Havent’ had time to mess with FLDIGI over
>> there yet, but maybe next week.
>>
>> Just a thought…….
>>
>> Jim, W6JHB
>>
>>
>>> On Saturday, May 28, 2016, at Saturday,
>>> 12:22 PM, Richard W Hemingway
>>> <[hidden email]> wrote:
>>>
>>> Hi,
>>> I am about to give up on my K3S and PSK with
>>> my Fldigi on my Mac computer. I am unable to
>>> connect either with the SignaLink or with a
>>> straight USK connection. Neither will cause
>>> the TX light to come on or TX! I have never
>>> had t his problem before on any of my Rigs, or
>>> before when I owned a K3. Joe tried your
>>> hamlib as well as the Rig Cat settings sent to
>>> me from Elecraft. No go.???
>>> If anyone has any bright ideas please let me
>>> know. This should be keying the K3S but it is
>>> not. Have I sset something that would block
>>> t his?
>>> All have a great Memorial weekend, remembering
>>> our fallen..
>>> Take care,
>>> Dick. N5XRD

James Bennett

Re: About to give up

Phil,

Is this something new with El Capitan? I’ve always been making settings changes in the MIDI application. Anyway, I gave it a try and set USB Audio CODEC as the output device. Fired up WSJT-X and answered a CQ. It keyed the K3 for about five seconds and then the audio started coming out the iMac internal speakers. Wonderful. This is the same crud as what was happening before. Not everyone on 10.11.5 is as lucky as I am, but there are a bunch of folks who’ve been hosed by this release. Not sure if you subscribe to the WSJT-X development reflector, but the airwaves were burning on this subject over the past several weeks. Someone at Apple needs a swift kick in the pants….

Jim, W6JHB

> On Saturday, May 28, 2016, at Saturday, 8:31 PM, Phil Wheeler <[hidden email]> wrote:
>
> Adding to what I said below: You do System Preferences > Sound > Input if you want your audio input to come from an external USB device (Griffin iMic, SignalinkUSB, K3s, etc.).
>
> I am running OS X 10.11.5 and just tested this with an iMic I happened to have with me.
>
> 73, Phil W7OX
>
> On 5/28/16 8:18 PM, Phil Wheeler wrote:
>> Jim (and perhaps Dick),
>>
>> Then go to System Preferences > Sound > Output and select the external USB device you want the as the destination for your audio output. You have to do this in OS X, not in the application software.
>>
>> 73, Phil W7OX
>>
>>
>>
>> On 5/28/16 7:49 PM, James Bennett wrote:
>>> Dick,
>>>
>>> By any chance have you in the past few weeks upgraded your mac to El Capitan? I had a working system (K3, FLDIGI, WSJT-X) and silly me, upgraded to El Capitan and a subsequent follow-on update. It has completely broken my digital mode operating. The audio is now routed to the internal iMac speakers - no matter what I’ve put in the settings of either piece of software. Needless to say, with the audio going to the speakers instead of to the K3, it never goes into transmit. Apple has really screwed up things this time. I’ve since moved my digital operation off of the iMac and over to a Raspberry Pi 3 where WSJT-X is working just fine. Havent’ had time to mess with FLDIGI over there yet, but maybe next week.
>>>
>>> Just a thought…….
>>>
>>> Jim, W6JHB
>>>
>>>
>>>> On Saturday, May 28, 2016, at Saturday, 12:22 PM, Richard W Hemingway <[hidden email]> <mailto:[hidden email]> wrote:
>>>>
>>>> Hi,
>>>> I am about to give up on my K3S and PSK with my Fldigi on my Mac computer. I am unable to connect either with the SignaLink or with a straight USK connection. Neither will cause the TX light to come on or TX! I have never had t his problem before on any of my Rigs, or before when I owned a K3. Joe tried your hamlib as well as the Rig Cat settings sent to me from Elecraft. No go.???
>>>> If anyone has any bright ideas please let me know. This should be keying the K3S but it is not. Have I sset something that would block t his?
>>>> All have a great Memorial weekend, remembering our fallen..
>>>> Take care,
>>>> Dick. N5XRD
>

Bill Frantz

Re: About to give up

In reply to this post by Rick WA6NHC-2

I found the SignaLink USB VOX based PTT to be very reliable.
When I am using a SignaLink, I can always know my computer is
transmitting by hearing the relay click in the SignaLink. When I
had it connected to the PTT of the K3, it was 100% reliable.

(I have moved to a different sound interface since. I still use
the SignaLink with my KX3 operating portable.)

73 Bill AE6JV

On 5/28/16 at 4:52 PM, [hidden email] (Rick WA6NHC) wrote:

>I STRONGLY suggest that you do NOT rely on the PTT from the
>SignaLink at all, ever, no way, uh uh, fuggedaboudit, nyet.
>You have to use the full audio drive of the SLUSB to trip it's
>VOX, which is still not reliable.

-------------------------------------------------------------------------
Bill Frantz | The first thing you need when | Periwinkle
(408)356-8506 | using a perimeter defense is a | 16345
Englewood Ave
www.pwpconsult.com | perimeter. | Los Gatos,
CA 95032

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Phil Wheeler-2

Re: About to give up

In reply to this post by James Bennett

Not new so far as I know, Jim. I've been doing
that with usb audio devices for some years.

But I must admit I've never operated WSJT-X. And
when I use PSK31 I use Windows, due to the wider
availability of ham radio software. My shack
operating computer is an old 2010 11" MacBook Air,
chosen because I can see my rigs with it in front
of them and it has full-size keyboard. It's
dual-boot OS X 10.11.5 and Windows 10. I do all my
ham radio work on the Windows side. And for PSK31
I use Digipan (which I've been using for many
years) and a Signalink USB.

When I get a chance I'll try fldigi on the OS X
side with the Signalink USB and see if I run into
any difficulties of the type you describe.

73, Phil W7OX

On 5/28/16 8:48 PM, James Bennett wrote:

> Phil,
>
> Is this something new with El Capitan? I’ve always been making settings changes in the MIDI application. Anyway, I gave it a try and set USB Audio CODEC as the output device. Fired up WSJT-X and answered a CQ. It keyed the K3 for about five seconds and then the audio started coming out the iMac internal speakers. Wonderful. This is the same crud as what was happening before. Not everyone on 10.11.5 is as lucky as I am, but there are a bunch of folks who’ve been hosed by this release. Not sure if you subscribe to the WSJT-X development reflector, but the airwaves were burning on this subject over the past several weeks. Someone at Apple needs a swift kick in the pants….
>
> Jim, W6JHB
>
>
>
>> On Saturday, May 28, 2016, at Saturday, 8:31 PM, Phil Wheeler <[hidden email]> wrote:
>>
>> Adding to what I said below: You do System Preferences > Sound > Input if you want your audio input to come from an external USB device (Griffin iMic, SignalinkUSB, K3s, etc.).
>>
>> I am running OS X 10.11.5 and just tested this with an iMic I happened to have with me.
>>
>> 73, Phil W7OX
>>
>> On 5/28/16 8:18 PM, Phil Wheeler wrote:
>>> Jim (and perhaps Dick),
>>>
>>> Then go to System Preferences > Sound > Output and select the external USB device you want the as the destination for your audio output. You have to do this in OS X, not in the application software.
>>>
>>> 73, Phil W7OX
>>>
>>>
>>>
>>> On 5/28/16 7:49 PM, James Bennett wrote:
>>>> Dick,
>>>>
>>>> By any chance have you in the past few weeks upgraded your mac to El Capitan? I had a working system (K3, FLDIGI, WSJT-X) and silly me, upgraded to El Capitan and a subsequent follow-on update. It has completely broken my digital mode operating. The audio is now routed to the internal iMac speakers - no matter what I’ve put in the settings of either piece of software. Needless to say, with the audio going to the speakers instead of to the K3, it never goes into transmit. Apple has really screwed up things this time. I’ve since moved my digital operation off of the iMac and over to a Raspberry Pi 3 where WSJT-X is working just fine. Havent’ had time to mess with FLDIGI over there yet, but maybe next week.
>>>>
>>>> Just a thought…….
>>>>
>>>> Jim, W6JHB
>>>>
>>>>
>>>>> On Saturday, May 28, 2016, at Saturday, 12:22 PM, Richard W Hemingway <[hidden email]> <mailto:[hidden email]> wrote:
>>>>>
>>>>> Hi,
>>>>> I am about to give up on my K3S and PSK with my Fldigi on my Mac computer. I am unable to connect either with the SignaLink or with a straight USK connection. Neither will cause the TX light to come on or TX! I have never had t his problem before on any of my Rigs, or before when I owned a K3. Joe tried your hamlib as well as the Rig Cat settings sent to me from Elecraft. No go.???
>>>>> If anyone has any bright ideas please let me know. This should be keying the K3S but it is not. Have I sset something that would block t his?
>>>>> All have a great Memorial weekend, remembering our fallen..
>>>>> Take care,
>>>>> Dick. N5XRD

wayne burdick

Re: Beep

Administrator

In reply to this post by Jeff Herr

This may be due to a switch emulation command being sent. If so, you could set MENU:SW TONE to OFF.

73,
Wayne
N6KR

On May 28, 2016, at 7:22 PM, Jeff Herr <[hidden email]> wrote:

> In regard to the Elecraft Frequency Memory Editor:
>
> When using the QSY capability the KX3 does a beep.
>
> When I am up late at night this is problematic.
>
> Is there a way to turn off the "beep"
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

Jeff Herr

Re: Beep

That is a no go.

-----Original Message-----
From: Wayne Burdick [mailto:[hidden email]]
Sent: Sunday, May 29, 2016 14:07 PM
To: Jeff Herr
Cc: [hidden email]
Subject: Re: [Elecraft] Beep

This may be due to a switch emulation command being sent. If so, you could
set MENU:SW TONE to OFF.

73,
Wayne
N6KR

On May 28, 2016, at 7:22 PM, Jeff Herr <[hidden email]> wrote:

> In regard to the Elecraft Frequency Memory Editor:
>
> When using the QSY capability the KX3 does a beep.
>
> When I am up late at night this is problematic.
>
> Is there a way to turn off the "beep"
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html Message delivered to
> [hidden email]

wayne burdick

Re: Beep

Administrator

I'll add this to the high-priority bug list.

73,
Wayne
N6KR

On May 29, 2016, at 4:13 PM, "Jeff Herr" <[hidden email]> wrote:

> That is a no go.
>
>
> -----Original Message-----
> From: Wayne Burdick [mailto:[hidden email]]
> Sent: Sunday, May 29, 2016 14:07 PM
> To: Jeff Herr
> Cc: [hidden email]
> Subject: Re: [Elecraft] Beep
>
> This may be due to a switch emulation command being sent. If so, you could
> set MENU:SW TONE to OFF.
>
> 73,
> Wayne
> N6KR
>
>
> On May 28, 2016, at 7:22 PM, Jeff Herr <[hidden email]> wrote:
>
>> In regard to the Elecraft Frequency Memory Editor:
>>
>> When using the QSY capability the KX3 does a beep.
>>
>> When I am up late at night this is problematic.
>>
>> Is there a way to turn off the "beep"
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net Please help support this email
>> list: http://www.qsl.net/donate.html Message delivered to
>> [hidden email]
>

Jeff Herr

Re: Beep

In reply to this post by wayne burdick

any hope of killing off the beep?

-----Original Message-----
From: Jeff Herr [mailto:[hidden email]]
Sent: Sunday, May 29, 2016 16:13 PM
To: 'Wayne Burdick'
Cc: '[hidden email]'
Subject: RE: [Elecraft] Beep

That is a no go.

-----Original Message-----
From: Wayne Burdick [mailto:[hidden email]]
Sent: Sunday, May 29, 2016 14:07 PM
To: Jeff Herr
Cc: [hidden email]
Subject: Re: [Elecraft] Beep

This may be due to a switch emulation command being sent. If so, you could
set MENU:SW TONE to OFF.

73,
Wayne
N6KR

On May 28, 2016, at 7:22 PM, Jeff Herr <[hidden email]> wrote:

> In regard to the Elecraft Frequency Memory Editor:
>
> When using the QSY capability the KX3 does a beep.
>
> When I am up late at night this is problematic.
>
> Is there a way to turn off the "beep"
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html Message delivered to
> [hidden email]

Jeff Herr

Re: Beep

In reply to this post by Jeff Herr

Any hope of killing the beep?

this is an old issue.....since a lot of changes are in beta maybe this could
be considered?

In regard to the Elecraft Frequency Memory Editor:

When using the QSY capability the KX3 does a beep.

************Even with the headphones plugged in, the speaker does a beep.

When I am up late at night this is problematic.

Is there a way to turn off the "beep"

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of Jeff
Herr
Sent: Sunday, May 29, 2016 16:13 PM
To: 'Wayne Burdick'
Cc: [hidden email]
Subject: Re: [Elecraft] Beep

That is a no go.

-----Original Message-----
From: Wayne Burdick [mailto:[hidden email]]
Sent: Sunday, May 29, 2016 14:07 PM
To: Jeff Herr
Cc: [hidden email]
Subject: Re: [Elecraft] Beep

This may be due to a switch emulation command being sent. If so, you could
set MENU:SW TONE to OFF.

73,
Wayne
N6KR

On May 28, 2016, at 7:22 PM, Jeff Herr <[hidden email]> wrote:

> In regard to the Elecraft Frequency Memory Editor:
>
> When using the QSY capability the KX3 does a beep.
>
> When I am up late at night this is problematic.
>
> Is there a way to turn off the "beep"
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html Message delivered to
> [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]