Hello guys was doing an inventory of my K2 kit when I ran into I suppose a typo on the part list. Page 3 of Appendix A D9 states you should have one 1N5711 Diode with Orange glass body E560004. then D8, D11, D13, D18, D40, D41 states you should have 6 ea 1N4148 clear or blue glass body E560002. I have found this to be wrong? I have one blue glass body but the part number on the blue diode is 1N5711 of which I am suppose to have only one. I have 6 orange glass body diodes of which no part number can be seen on the diode. Am I correct in assuming that the descriptions are wrong and that E56004 should say blue glass body, and E560002 should say orange? Revision G, May 29, 2007 Manual Thanks KE5EBS Patrick Bourgeois _________________________________________________________________ Hotmail: Trusted email with powerful SPAM protection. http://clk.atdmt.com/GBL/go/210850553/direct/01/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Hi Patrick,
I vaguely remember scratching my head a little at this stage too, but I came out with the right parts. I think the 1N5711 might have been a different color than described, but the number was right. As for the small ones, I needed a powerful magnifying glass to read the numbers. IIRC, the label appears on the body as a column wrapped around the body of the diode, i.e.: 1N 41 48 The 5711 was the same way too I think. Be sure and get a STRONG magnifying glass to identify these little dudes.... LS |
In reply to this post by Patrick Bourgeois
Hi Patrick,
I just finished my kit and ran into the same issue. I pretty much ignored the colours they specified and went with the markings on the component instead. Having a good magnifier helps a lot with that though. :) Enjoy the kit. I got mine finished up last weekend and have had a number of great QSOs with it. I'm finding I greatly prefer it to the FT-950 for CW. I only use the other rig when I need a bit more power (i.e. rarely.) or for digi modes. 73, -- Sean - VA5LF On 03/19/2010 10:12 AM, Patrick Bourgeois wrote: > > Hello guys was doing an inventory of my K2 kit when I ran into I suppose a typo on the part list. Page 3 of Appendix A D9 states you should have one 1N5711 Diode with Orange glass body E560004. then D8, D11, D13, D18, D40, D41 states you should have 6 ea 1N4148 clear or blue glass body E560002. I have found this to be wrong? I have one blue glass body but the part number on the blue diode is 1N5711 of which I am suppose to have only one. I have 6 orange glass body diodes of which no part number can be seen on the diode. Am I correct in assuming that the descriptions are wrong and that E56004 should say blue glass body, and E560002 should say orange? > > > Revision G, May 29, 2007 Manual > > > Thanks > KE5EBS > > Patrick Bourgeois > > _________________________________________________________________ > Hotmail: Trusted email with powerful SPAM protection. > http://clk.atdmt.com/GBL/go/210850553/direct/01/ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Color is not a good way to identify components (except for the standard
color coding for component values). The manufacturer can change the device body color on a whim, and if the kit manufacturer decides to change component suppliers, the colors may not be the same as before. Refer to the designation on the component and not the body color. 73, Don W3FPR Sean Cavanaugh wrote: > Hi Patrick, > > I just finished my kit and ran into the same issue. I pretty much > ignored the colours they specified and went with the markings on the > component instead. Having a good magnifier helps a lot with that though. :) > > Enjoy the kit. I got mine finished up last weekend and have had a number > of great QSOs with it. I'm finding I greatly prefer it to the FT-950 for > CW. I only use the other rig when I need a bit more power (i.e. rarely.) > or for digi modes. > > 73, > > -- > Sean - VA5LF > > On 03/19/2010 10:12 AM, Patrick Bourgeois wrote: > >> Hello guys was doing an inventory of my K2 kit when I ran into I suppose a typo on the part list. Page 3 of Appendix A D9 states you should have one 1N5711 Diode with Orange glass body E560004. then D8, D11, D13, D18, D40, D41 states you should have 6 ea 1N4148 clear or blue glass body E560002. I have found this to be wrong? I have one blue glass body but the part number on the blue diode is 1N5711 of which I am suppose to have only one. I have 6 orange glass body diodes of which no part number can be seen on the diode. Am I correct in assuming that the descriptions are wrong and that E56004 should say blue glass body, and E560002 should say orange? >> >> >> Revision G, May 29, 2007 Manual >> >> >> Thanks >> KE5EBS >> >> Patrick Bourgeois >> >> _________________________________________________________________ >> Hotmail: Trusted email with powerful SPAM protection. >> http://clk.atdmt.com/GBL/go/210850553/direct/01/ >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.791 / Virus Database: 271.1.1/2758 - Release Date: 03/19/10 18:07:00 > > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Free forum by Nabble | Edit this page |