Audio Out...

[evetsmd]

With 4 radios and a computer at the operating position, you can only have
so many speakers before
it gets out of control...
I have an audio mixer that lets me control the inputs and the feed a single
amplified set of studio monitors.

I'd like to connect the K3 thru the mixer....line out to mixer seems to
work but I'd like to keep line in/out
for the digital modes......anyone have thoughts about using the speaker out
jack or phone jack for this approach...

or if you've taken a different approach or seen an article about doing
this, I'd appreciate hearing about it!

Thanks for the help....

Steve
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm-4]

Steve,

While either the rear phone jack or the speaker jack should work OK, I
would use the phones jack.

73,
Don W3FPR

On 6/28/2015 9:29 AM, evetsmd wrote:

> With 4 radios and a computer at the operating position, you can only have
> so many speakers before
> it gets out of control...
> I have an audio mixer that lets me control the inputs and the feed a single
> amplified set of studio monitors.
>
> I'd like to connect the K3 thru the mixer....line out to mixer seems to
> work but I'd like to keep line in/out
> for the digital modes......anyone have thoughts about using the speaker out
> jack or phone jack for this approach...
>
> or if you've taken a different approach or seen an article about doing
> this, I'd appreciate hearing about it!
>
> Thanks for the help....
>
> Steve
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[vk2rq]

I use a mixer to manage the audio from my radios too, phones jack works well. One mixer output mixer goes to a set of headphones and the other output to a set of powered monitor speakers. The outputs each have their own master volume control, so I can have the audio coming out the speakers, the headphones, or both.
I forget how I put audio into the radios (I'm mostly CW, and I just use an audio switch box to direct the paddles/key to the right radio). I think maybe I hooked up a mic and a PC up to one of the input strips on the mixer, and take the audio out the back of the input strip towards my main radio; for the other radios I use a hand mike where needed.
73, Matt VK2RQ




On Sun, Jun 28, 2015 at 6:30 AM -0700, "evetsmd" <[hidden email]> wrote:










With 4 radios and a computer at the operating position, you can only have
so many speakers before
it gets out of control...
I have an audio mixer that lets me control the inputs and the feed a single
amplified set of studio monitors.

I'd like to connect the K3 thru the mixer....line out to mixer seems to
work but I'd like to keep line in/out
for the digital modes......anyone have thoughts about using the speaker out
jack or phone jack for this approach...

or if you've taken a different approach or seen an article about doing
this, I'd appreciate hearing about it!

Thanks for the help....

Steve
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]