Band selection

[VE3WDM]

Ok folks here is what I would like to do with my K3....set it up so that when I press the number one key I am on the 10 meter bands, press the 2 key 12 meter band and so on up to 80 meters. Is there a way to program this as opposed to up and down band switch?
Thanks in advance.
Mike
VE3WDM
     
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[wayne burdick]

Sure. First, set CONFIG:MEM 0-9 to PER BAND. Next, switch to 10  
meters. Then tap V>M followed by #1. This will assign #1 to 10 meters,  
and you can assign up to 9 more bands in this way.

73,
Wayne
N6KR



On Sep 28, 2010, at 3:05 PM, Mike Weir wrote:

>
> Ok folks here is what I would like to do with my K3....set it up so  
> that when I press the number one key I am on the 10 meter bands,  
> press the 2 key 12 meter band and so on up to 80 meters. Is there a  
> way to program this as opposed to up and down band switch?
> Thanks in advance.
> Mike
> VE3WDM
>  
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Adriano Perazio]

Just placed my k3 order by the afternoon. W/ 2nd rx, recorder, 1.8
filter, 400hz filter and cat cable.
Let´s wait it work out.

Tnx all
PY2ADR / ZY2C

-----Mensagem original-----
De: [hidden email]
[mailto:[hidden email]] Em nome de Mike Weir
Enviada em: terça-feira, 28 de setembro de 2010 19:05
Para: [hidden email]
Assunto: [Elecraft] Band selection


Ok folks here is what I would like to do with my K3....set it up so that
when I press the number one key I am on the 10 meter bands, press the 2
key 12 meter band and so on up to 80 meters. Is there a way to program
this as opposed to up and down band switch?
Thanks in advance.
Mike
VE3WDM
     
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Bill K9YEQ]

You won't be sorry.  I thoroughly enjoy using my fully loaded k3 and P3. Am
so spoiled.  My wife hasn't a clue :-).  Life is great!!!

Bill
K9YEQ
K2 and KX1 field tester, K3 and modules
-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Adriano Perazio
Sent: Tuesday, September 28, 2010 5:36 PM
To: [hidden email]
Subject: [Elecraft] Tnx all for the help choosing the k3

Just placed my k3 order by the afternoon. W/ 2nd rx, recorder, 1.8 filter,
400hz filter and cat cable.
Let´s wait it work out.

Tnx all
PY2ADR / ZY2C



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[VE3WDM]

Thanks very much Wayne just set up the K3 they way you said works great and nice to not have to toggle through the bands...now is there a way to also set up the KRX3 the same way as the main?

[Nr4c]

See the manual, Revision D&, bottom left of page 16.  Explains it for you.

...bc

-----Original Message-----
From: Mike Weir [mailto:[hidden email]]
Sent: Tuesday, September 28, 2010 6:05 PM
To: [hidden email]
Subject: [Elecraft] Band selection


Ok folks here is what I would like to do with my K3....set it up so that
when I press the number one key I am on the 10 meter bands, press the 2 key
12 meter band and so on up to 80 meters. Is there a way to program this as
opposed to up and down band switch?
Thanks in advance.
Mike
VE3WDM
     
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Mike K2MK]

Hi Mike,

In addition to Wayne's post, the K3 Frequency Memory Editor is an excellent tool for this purpose. It's a bit hidden within the Elecraft site. I just found it by going to the main page:
http://www.elecraft.com/
Choose Firmware and S/W in the blue box on the left side and then press K3 and K2 Control and Logging Software. You'll see it at the top of the page.

73,
Mike K2MK

VE3WDM wrote

Ok folks here is what I would like to do with my K3....set it up so that when I press the number one key I am on the 10 meter bands, press the 2 key 12 meter band and so on up to 80 meters. Is there a way to program this as opposed to up and down band switch?
Thanks in advance.
Mike
VE3WDM

[Nate Bargmann]

* On 2010 28 Sep 17:38 -0500, Adriano Perazio wrote:
> Just placed my k3 order by the afternoon. W/ 2nd rx, recorder, 1.8
> filter, 400hz filter and cat cable.
> Let´s wait it work out.

Congratulations!

I just received shipping confirmation this evening so I expect mine will
be here early next week.

73, de Nate >>

--

"The optimist proclaims that we live in the best of all
possible worlds.  The pessimist fears this is true."

Ham radio, Linux, bikes, and more: http://n0nb.us/index.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[ha4zd]

  Just learnt a new phenomena, the output is 12W on SSB, 5W on CW. All
bands, no power is set per band. Manually setting shows 12watts, actual
is only 5W on CW. SSB is OK. Any thoughts?

73,

István Szabó



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dick Dievendorff]

Almost.  See "MEM 0-9" in the configuration section on page 57 of the D-7
version of the K3 Owner's manual. After you set these up, you can press M->V
and then one of the number keys to navigate to the last-used frequency on a
particular band.

You may find the K3 Frequency Memory Editor a convenient way to set up these
and other memories and save the settings into a file so you can restore them
if you accidentally erase a memory.

Dick, K6KR


-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Mike Weir
Sent: Tuesday, September 28, 2010 3:05 PM
To: [hidden email]
Subject: [Elecraft] Band selection


Ok folks here is what I would like to do with my K3....set it up so that
when I press the number one key I am on the 10 meter bands, press the 2 key
12 meter band and so on up to 80 meters. Is there a way to program this as
opposed to up and down band switch?
Thanks in advance.
Mike
VE3WDM
     
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html