Blank display on K3 power on

[E Glenn Wolf Jr]

All -

I turned on my K3 this afternoon and was greeted by a blank display.  I
found that I couldn't turn the radio off using the front panel button so
I pulled the power.  After plugging the power back in, I tried again.  
A blank display.  Since I had a backup I opted to try a reset (shift
LO-power on) and the radio hangs at the EE INIT display.

Is there anything else I can try to bring the radio back to life?

TIA -
Glenn
N5RN
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Phil Wheeler-2]

No wise words. But I'd try first connecting to it
with the K3 Utility.

Phil W7OX

On 8/9/15 4:39 PM, Glenn - N5RN wrote:

> All -
>
> I turned on my K3 this afternoon and was greeted
> by a blank display.  I found that I couldn't
> turn the radio off using the front panel button
> so I pulled the power.  After plugging the power
> back in, I tried again.   A blank display.  
> Since I had a backup I opted to try a reset
> (shift LO-power on) and the radio hangs at the
> EE INIT display.
>
> Is there anything else I can try to bring the
> radio back to life?
>
> TIA -
> Glenn
> N5RN

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm-4]

Glenn,

Fire up K3 Utility and first read the HELP section on forcing a firmware
load.  Follow those instructions and load all firmware.

If that does not work, contact K3support.

73,
Don W3FPR

On 8/9/2015 7:39 PM, Glenn - N5RN wrote:
> All -
>
> I turned on my K3 this afternoon and was greeted by a blank display.  
> I found that I couldn't turn the radio off using the front panel
> button so I pulled the power.  After plugging the power back in, I
> tried again.   A blank display.  Since I had a backup I opted to try a
> reset (shift LO-power on) and the radio hangs at the EE INIT display.
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]