Bluetooth Noise cancelling headphones

classic Classic list List threaded Threaded
6 messages Options
Reply | Threaded
Open this post in threaded view
|

Bluetooth Noise cancelling headphones

Dave Sublette-2
Good evening,

A few days ago I posted a question about using Bluetooth headsets and the
latency problem.  I got no answers, so I just took the bull by the horns
and ordered something.

Today I received the Avantree Audikast aptX low latency transmitter and the
Avantree ANC031 Active Noise Canceling Headset.

After three hours charging the headset, per the instructions, I hooked it
all to the headphone output of my KX3.

It works!  There is no detectable latency.  I can send and receive Morse
without stuttering.  I can't hear any latency at all.

I walked the entire length of the house, about thirty feet in each
direction with walls, etc.  I can hear the receiver just fine.  One end of
the path is in the garage where my workshop is.  That gives the possibility
of listening to a fixed or scanned set of frequencies while I am working on
something else.

In short, it appears to be just what I wanted.  Now I won't try to break my
neck or drag all the radios off the table when I jump up to go get another
Pepsi out of the fridge.  :-)

No connection to selling these products here.  Just reporting the results
to to this point.

I may report again after I have used it awhile.  The battery charge is
advertised for 40 hours.  I'm sure I will put that to the test.

73,

Dave, K4TO
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Bluetooth Noise cancelling headphones

Gary K9GS
Hello Dave,Do you have a link for what you purchased?73,Gary K9GS
-------- Original message --------From: Dave Sublette <[hidden email]> Date: 11/19/18  7:46 PM  (GMT-06:00) To: Elecraft Discussion List <[hidden email]>Subject: [Elecraft] Bluetooth Noise cancelling headphones Good evening,A few days ago I posted a question about using Bluetooth headsets and thelatency problem.  I got no answers, so I just took the bull by the hornsand ordered something.Today I received the Avantree Audikast aptX low latency transmitter and theAvantree ANC031 Active Noise Canceling Headset.After three hours charging the headset, per the instructions, I hooked itall to the headphone output of my KX3.It works!  There is no detectable latency.  I can send and receive Morsewithout stuttering.  I can't hear any latency at all.I walked the entire length of the house, about thirty feet in eachdirection with walls, etc.  I can hear the receiver just fine.  One end ofthe path is in the garage where my workshop is.  That gives the possibilityof listening to a fixed or scanned set of frequencies while I am working onsomething else.In short, it appears to be just what I wanted.  Now I won't try to break myneck or drag all the radios off the table when I jump up to go get anotherPepsi out of the fridge.  :-)No connection to selling these products here.  Just reporting the resultsto to this point.I may report again after I have used it awhile.  The battery charge isadvertised for 40 hours.  I'm sure I will put that to the test.73,Dave, K4TO______________________________________________________________Elecraft mailing listHome: http://mailman.qth.net/mailman/listinfo/elecraftHelp: http://mailman.qth.net/mmfaq.htmPost: mailto:[hidden email] list hosted by: http://www.qsl.netPlease help support this email list: http://www.qsl.net/donate.htmlMessage delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Bluetooth Noise cancelling headphones

Gwen Patton
In reply to this post by Dave Sublette-2
I have some nice Bluetooth active noise cancelling headphones. They're a
folding set made by MPOW that I don't think they make anymore. You can also
plug a 3.5mm stereo patch cable into them and not turn on the Bluetooth
section, though you can still turn on the active noise cancelling
separately.

I've used them with several devices and they seem to work well. I've used
then with the patch cord to the KX3 headphone jack, and they work just
fine, but that's scarcely a test. I don't know how I would test the
Bluetooth function with the KX3, as the rig doesn't have Bluetooth output
that I'm aware of. I'd have to use a separate Bluetooth transmitter, which
I don't currently have.

The headphones I used are these, that I purchased at the time on Amazon.
Unfortunately, they are no longer available.

https://www.amazon.com/gp/product/B00LBO0PWM

These appear to be a more recent model with similar functionality.

https://www.amazon.com/Mpow-Cancelling-Bluetooth-Headphones-Noise-Cancelling/dp/B07GF8T9VT/

Gwen NG3P

On Mon, Nov 19, 2018 at 9:44 PM GaryK9GS <[hidden email]> wrote:

> Hello Dave,Do you have a link for what you purchased?73,Gary K9GS
> -------- Original message --------From: Dave Sublette <[hidden email]>
> Date: 11/19/18  7:46 PM  (GMT-06:00) To: Elecraft Discussion List <
> [hidden email]>Subject: [Elecraft] Bluetooth Noise cancelling
> headphones Good evening,A few days ago I posted a question about using
> Bluetooth headsets and thelatency problem.  I got no answers, so I just
> took the bull by the hornsand ordered something.Today I received the
> Avantree Audikast aptX low latency transmitter and theAvantree ANC031
> Active Noise Canceling Headset.After three hours charging the headset, per
> the instructions, I hooked itall to the headphone output of my KX3.It
> works!  There is no detectable latency.  I can send and receive
> Morsewithout stuttering.  I can't hear any latency at all.I walked the
> entire length of the house, about thirty feet in eachdirection with walls,
> etc.  I can hear the receiver just fine.  One end ofthe path is in the
> garage where my workshop is.  That gives the possibilityof listening to a
> fixed or scanned set of frequencies while I am working onsomething else.In
> short, it appears to be just what I wanted.  Now I won't try to break
> myneck or drag all the radios off the table when I jump up to go get
> anotherPepsi out of the fridge.  :-)No connection to selling these products
> here.  Just reporting the resultsto to this point.I may report again after
> I have used it awhile.  The battery charge isadvertised for 40 hours.  I'm
> sure I will put that to the test.73,Dave,
> K4TO______________________________________________________________Elecraft
> mailing listHome: http://mailman.qth.net/mailman/listinfo/elecraftHelp:
> http://mailman.qth.net/mmfaq.htmPost: mailto:[hidden email]
> list hosted by: http://www.qsl.netPlease help support this email list:
> http://www.qsl.net/donate.htmlMessage delivered to [hidden email]
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]



--

-+-+-+-+-
Jenny Everywhere's Infinite: Quark Time
http://quarktime.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Bluetooth Noise cancelling headphones

kevinr@coho.net
In reply to this post by Dave Sublette-2
http://www.avantree.com/multipoint-bluetooth-transmitter-avantree-tc418.html

http://www.avantree.com/active-noise-cancelling-bluetooth-headset-anc-headphones-anc031.html


On 11/19/18 6:43 PM, GaryK9GS wrote:

> Hello Dave,Do you have a link for what you purchased?73,Gary K9GS
> -------- Original message --------From: Dave Sublette <[hidden email]> Date: 11/19/18  7:46 PM  (GMT-06:00) To: Elecraft Discussion List <[hidden email]>Subject: [Elecraft] Bluetooth Noise cancelling headphones Good evening,A few days ago I posted a question about using Bluetooth headsets and thelatency problem.  I got no answers, so I just took the bull by the hornsand ordered something.Today I received the Avantree Audikast aptX low latency transmitter and theAvantree ANC031 Active Noise Canceling Headset.After three hours charging the headset, per the instructions, I hooked itall to the headphone output of my KX3.It works!  There is no detectable latency.  I can send and receive Morsewithout stuttering.  I can't hear any latency at all.I walked the entire length of the house, about thirty feet in eachdirection with walls, etc.  I can hear the receiver just fine.  One end ofthe path is in the garage where my workshop is.  That gives the possibilityof listening to a fixed or scanned set of frequencies while I am working onsomething else.In short, it appears to be just what I wanted.  Now I won't try to break myneck or drag all the radios off the table when I jump up to go get anotherPepsi out of the fridge.  :-)No connection to selling these products here.  Just reporting the resultsto to this point.I may report again after I have used it awhile.  The battery charge isadvertised for 40 hours.  I'm sure I will put that to the test.73,Dave, K4TO______________________________________________________________Elecraft mailing listHome: http://mailman.qth.net/mailman/listinfo/elecraftHelp: http://mailman.qth.net/mmfaq.htmPost: mailto:[hidden email] list hosted by: http://www.qsl.netPlease help support this email list: http://www.qsl.net/donate.htmlMessage delivered to [hidden email]
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Bluetooth Noise cancelling headphones

Gary K9GS
Thanks Kevin.  Did you order the same models as Dave?Interesting to read that the low latency features only work with their brand headphones. I believe I saw that on Amazon who also carrys the Avantree brand.   I'll probably get the non noise cancelling model headphones as I have a quiet shack.  Although now that I think about it maybe the active noise cancelling model would be good for traveling and FD/multi-op contesting. 73,Gary K9GS
-------- Original message --------From: kevinr <[hidden email]> Date: 11/19/18  8:54 PM  (GMT-06:00) To: [hidden email] Subject: Re: [Elecraft] Bluetooth Noise cancelling headphones http://www.avantree.com/multipoint-bluetooth-transmitter-avantree-tc418.htmlhttp://www.avantree.com/active-noise-cancelling-bluetooth-headset-anc-headphones-anc031.htmlOn 11/19/18 6:43 PM, GaryK9GS wrote:> Hello Dave,Do you have a link for what you purchased?73,Gary K9GS> -------- Original message --------From: Dave Sublette <[hidden email]> Date: 11/19/18  7:46 PM  (GMT-06:00) To: Elecraft Discussion List <[hidden email]>Subject: [Elecraft] Bluetooth Noise cancelling headphones Good evening,A few days ago I posted a question about using Bluetooth headsets and thelatency problem.  I got no answers, so I just took the bull by the hornsand ordered something.Today I received the Avantree Audikast aptX low latency transmitter and theAvantree ANC031 Active Noise Canceling Headset.After three hours charging the headset, per the instructions, I hooked itall to the headphone output of my KX3.It works!  There is no detectable latency.  I can send and receive Morsewithout stuttering.  I can't hear any latency at all.I walked the entire length of the house, about thirty feet in eachdirection with walls, etc.  I can hear the receiver just fine.  One end ofthe path is in the garage where my workshop is.  That gives the possibilityof listening to a fixed or scanned set of frequencies while I am working onsomething else.In short, it appears to be just what I wanted.  Now I won't try to break myneck or drag all the radios off the table when I jump up to go get anotherPepsi out of the fridge.  :-)No connection to selling these products here.  Just reporting the resultsto to this point.I may report again after I have used it awhile.  The battery charge isadvertised for 40 hours.  I'm sure I will put that to the test.73,Dave, K4TO______________________________________________________________Elecraft mailing listHome: http://mailman.qth.net/mailman/listinfo/elecraftHelp: http://mailman.qth.net/mmfaq.htmPost: mailto:[hidden email] list hosted by: http://www.qsl.netPlease help support this email list: http://www.qsl.net/donate.htmlMessage delivered to [hidden email]> ______________________________________________________________> Elecraft mailing list> Home: http://mailman.qth.net/mailman/listinfo/elecraft> Help: http://mailman.qth.net/mmfaq.htm> Post: mailto:[hidden email]>> This list hosted by: http://www.qsl.net> Please help support this email list: http://www.qsl.net/donate.html> Message delivered to kevinr@coho.net______________________________________________________________Elecraft mailing listHome: http://mailman.qth.net/mailman/listinfo/elecraftHelp: http://mailman.qth.net/mmfaq.htmPost: mailto:[hidden email] list hosted by: http://www.qsl.netPlease help support this email list: http://www.qsl.net/donate.htmlMessage delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Bluetooth Noise cancelling headphones

Bill Frantz
In reply to this post by Dave Sublette-2
I have some noise cancelling headphones which I sometimes use to
quiet airplane noise. They make it possible to listen to music
without blowing out my ears from too much volume.

I always use them when our ARES/RACES group does communication
for the Los Gatos Children's Holliday Parade. I can actually
hear net control with a marching band next to me. (I also use a
noise cancelling mic.)

I haven't used them during CQP, but the RadioSport headphones I
used last time really kept the outside chatter down. They should
be useful in a tent/room of SSB operators.

Since they work as normal headphones when the noise cancelling
feature is turned off or the battery is dead, they are useful in
many places.

73 Bill AE6JV

On 11/19/18 at 8:49 PM, [hidden email] (Gary K9GS) wrote:

>Although now that I think about it maybe the active noise
>cancelling model would be good for traveling and FD/multi-op contesting.

-----------------------------------------------------------------------
Bill Frantz        | Can't fix stupid, but duct   | Periwinkle
(408)356-8506      | tape can muffle the sound... | 16345
Englewood Ave
www.pwpconsult.com |               - Bill Liebman | Los Gatos,
CA 95032

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]