Elecraft

CMP ALC on display

Classic

List

Threaded

10 messages Options

Antonio Matias

CMP ALC on display

Hello all
My KX3, one of this days, started to show on display the CMP ALC icons
Use to be with SWR and RF reading. Now only show this on CW and Data
have tried all to put it back.
On the manual says to push Keyer/Mic knob, but no success

any idea how this append?

PS have latest version software ON.

73
Tony
CT1FFU

--
António Matias

CT1FFU - CR5A

www.dxpatrol.com

QRV: HF, 6m, 4m,2m,70cm,23cm
SSB, CW, MGM
DX, EME, Contest,Sat.

POBOX-38
2504-909
Caldas da Rainha
Portugal
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Jim Bennett

Re: CMP ALC on display

Tony, press and hold the SPOT button for three seconds.

Jim / W6JHB

On Thursday, Feb 13, 2014, at Thursday, 9:41 AM, Antonio Matias wrote:

> Hello all
> My KX3, one of this days, started to show on display the CMP ALC icons
> Use to be with SWR and RF reading. Now only show this on CW and Data
> have tried all to put it back.
> On the manual says to push Keyer/Mic knob, but no success
>
> any idea how this append?
>
> PS have latest version software ON.
>
>
> 73
> Tony
> CT1FFU
>
> --
> António Matias
>
> CT1FFU - CR5A
>
> www.dxpatrol.com
>
> QRV: HF, 6m, 4m,2m,70cm,23cm
> SSB, CW, MGM
> DX, EME, Contest,Sat.
>
> POBOX-38
> 2504-909
> Caldas da Rainha
> Portugal
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Jim Bennett

Re: CMP ALC on display

Ooops - sorry - meant the CMP button.

On Thursday, Feb 13, 2014, at Thursday, 10:21 AM, Jim Bennett wrote:

> Tony, press and hold the SPOT button for three seconds.
>
> Jim / W6JHB
>
>
> On Thursday, Feb 13, 2014, at Thursday, 9:41 AM, Antonio Matias wrote:
>
>> Hello all
>> My KX3, one of this days, started to show on display the CMP ALC icons
>> Use to be with SWR and RF reading. Now only show this on CW and Data
>> have tried all to put it back.
>> On the manual says to push Keyer/Mic knob, but no success
>>
>> any idea how this append?
>>
>> PS have latest version software ON.
>>
>>
>> 73
>> Tony
>> CT1FFU
>>
>> --
>> António Matias
>>
>> CT1FFU - CR5A
>>
>> www.dxpatrol.com
>>
>> QRV: HF, 6m, 4m,2m,70cm,23cm
>> SSB, CW, MGM
>> DX, EME, Contest,Sat.
>>
>> POBOX-38
>> 2504-909
>> Caldas da Rainha
>> Portugal
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

Jim Bennett

Re: CMP ALC on display

In reply to this post by Jim Bennett

OK - let's try this again. I was juggling our 9-month old baby in one arm and trying to work the KX3 and keyboard in another hand. Sorry for the confusion. I presume your KX3 is set to Data or USB/LSB and you've pressed the CMP button. That button changes your meter display from SWR/RF to CMP/ALC. Simply press that CMP button again (don't hold it as I had previously mis-stated!). Your meter display should alternate between SWR/RF and CMP/ALC.

Jim

On Thursday, Feb 13, 2014, at Thursday, 10:21 AM, Jim Bennett wrote:

Jim Bennett

Re: CMP ALC on display

In reply to this post by Jim Bennett

So, your rig is in USB or LSB mode, right? I just set mine like that, and if I momentarily press CMP, the meter changes to CMP/ALC and the VFO-B display shows CMP 0. If I press CMP again, The meter goes to SWR/RF, and the CMP 0 is replaced by the VFO-B frequency. Yours does not do that?

On Thursday, Feb 13, 2014, at Thursday, 10:21 AM, Jim Bennett wrote:

Antonio Matias

Re: CMP ALC on display

Hi Jim
sorry to trouble

but no fix the problem yet
all the same. the CMP wont get out of there, and i like to see the SWR/RF
reading
Some how it might need modified another item on menu or so.
I just can´t figure what can it be...

tnx for assistance Jim and Don

PS: Keyer/Mic button only changes Mic gain, WPM on CW, and output PWR
CMP button turns CMP on from 0 to 30 and N/A

Nothing else doing here.

73

2014-02-13 23:24 GMT+00:00 Jim Bennett <[hidden email]>:

> Tony -
>
> Didn't hear back from you - is the problem fixed? What you say below is
> the way it is supposed to work - no CMP / ALC on CW, but only on SSB. While
> on SSB, you can toggle it on and off by tapping that CMP button, as Don and
> I mentioned.
>
> Jim / W6JHB
>
>
> On Thursday, Feb 13, 2014, at Thursday, 11:21 AM, Antonio Matias wrote:
>
> happen just like that.
> on CW i have SWR RF meter. But wen go back to SSB is changes it self to
> CMP ALC
>
>
>
>
> 2014-02-13 19:18 GMT+00:00 Jim Bennett <[hidden email]>:
>
>> How about if you go to CW mode and use that button. When I am in CW mode
>> and press CMP I get a "N/A", and if I press and hold, it let's me hear and
>> see my sidetone pitch.
>>
>>
>> On Thursday, Feb 13, 2014, at Thursday, 11:08 AM, Antonio Matias wrote:
>>
>> That´s why i think there must be here some trick
>> mine wont change CMP ALC to SWR RF wen i press CMP.
>> It only shows CMP 0 on the VFO B line.
>>
>> weird
>>
>>
>> Tony
>>
>>
>>
>> 2014-02-13 18:56 GMT+00:00 Jim Bennett <[hidden email]>:
>>
>>> So, your rig is in USB or LSB mode, right? I just set mine like that,
>>> and if I momentarily press CMP, the meter changes to CMP/ALC and the VFO-B
>>> display shows CMP 0. If I press CMP again, The meter goes to SWR/RF, and
>>> the CMP 0 is replaced by the VFO-B frequency. Yours does not do that?
>>>
>>> On Thursday, Feb 13, 2014, at Thursday, 10:21 AM, Jim Bennett wrote:
>>>
>>> > Tony, press and hold the SPOT button for three seconds.
>>> >
>>> > Jim / W6JHB
>>> >
>>> >
>>> > On Thursday, Feb 13, 2014, at Thursday, 9:41 AM, Antonio Matias
>>> wrote:
>>> >
>>> >> Hello all
>>> >> My KX3, one of this days, started to show on display the CMP ALC icons
>>> >> Use to be with SWR and RF reading. Now only show this on CW and Data
>>> >> have tried all to put it back.
>>> >> On the manual says to push Keyer/Mic knob, but no success
>>> >>
>>> >> any idea how this append?
>>> >>
>>> >> PS have latest version software ON.
>>> >>
>>> >>
>>> >> 73
>>> >> Tony
>>> >> CT1FFU
>>> >>
>>> >> --
>>> >> António Matias
>>> >>
>>> >> CT1FFU - CR5A
>>> >>
>>> >> www.dxpatrol.com
>>> >>
>>> >> QRV: HF, 6m, 4m,2m,70cm,23cm
>>> >> SSB, CW, MGM
>>> >> DX, EME, Contest,Sat.
>>> >>
>>> >> POBOX-38
>>> >> 2504-909
>>> >> Caldas da Rainha
>>> >> Portugal
>>> >> ______________________________________________________________
>>> >> Elecraft mailing list
>>> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> >> Help: http://mailman.qth.net/mmfaq.htm
>>> >> Post: mailto:[hidden email]
>>> >>
>>> >> This list hosted by: http://www.qsl.net
>>> >> Please help support this email list: http://www.qsl.net/donate.html
>>> >
>>> > ______________________________________________________________
>>> > Elecraft mailing list
>>> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> > Help: http://mailman.qth.net/mmfaq.htm
>>> > Post: mailto:[hidden email]
>>> >
>>> > This list hosted by: http://www.qsl.net
>>> > Please help support this email list: http://www.qsl.net/donate.html
>>>
>>>
>>
>>
>> --
>> António Matias
>>
>> CT1FFU - CR5A
>>
>> www.dxpatrol.com
>>
>> QRV: HF, 6m, 4m,2m,70cm,23cm
>> SSB, CW, MGM
>> DX, EME, Contest,Sat.
>>
>> POBOX-38
>> 2504-909
>> Caldas da Rainha
>> Portugal
>>
>>
>>
>
>
> --
> António Matias
>
> CT1FFU - CR5A
>
> www.dxpatrol.com
>
> QRV: HF, 6m, 4m,2m,70cm,23cm
> SSB, CW, MGM
> DX, EME, Contest,Sat.
>
> POBOX-38
> 2504-909
> Caldas da Rainha
> Portugal
>
>
>

--
António Matias

CT1FFU - CR5A

www.dxpatrol.com

QRV: HF, 6m, 4m,2m,70cm,23cm
SSB, CW, MGM
DX, EME, Contest,Sat.

POBOX-38
2504-909
Caldas da Rainha
Portugal
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Don Wilhelm-4

Re: CMP ALC on display

Tony,

It is possible that something has gotten mixed up in your firmware.
Hopefully you have saved your KX3 configuration - if you have, you can
try an EEINIT (parameter initialization). See page 44 in the manual.

If you have not saved a configuration (using KX3 Utility), you can still
try it by saving the configuration first. The danger in saving the
configuration just before EEINIT is that the error you have could just
be brought back when you do the configuration restore.

If you do not have a saved configuration, you may be able to obtain the
factory configuration data file from Elecraft. Contact
[hidden email] to obtain that file.

73,
Don W3FPR

On 2/13/2014 6:33 PM, Antonio Matias wrote:

wayne burdick

Re: CMP ALC on display

Administrator

In reply to this post by Antonio Matias

You may have "SSB+CW" turned on. From the release notes:

* CW-IN-SSB TRANSMIT ADDED: This feature allows you to send CW while in SSB mode, which can be useful when your SSB signal cannot be copied due to poor conditions. The other station will hear a tone at your CW pitch. To enable CW-in-SSB: Locate the CW WGHT menu entry, then tap ‘1’ (PRE) to alternate between “SSW +CW” (enabled) and “SSB –CW” (disabled). The default is disabled. Important Notes: (1) CW-in-SSB does not yet apply in SPLIT mode. (2) When CW-in-SSB is enabled, tapping the KEYER/MIC knob toggles between keyer speed and mic gain rather than between the two transmit metering scales (CMP/ALC and SWR/RF). The CMP/ALC scale is still shown temporarily whenever CMP or mic gain are adjusted.

There was a bug in an earlier version of firmware that may have left the CMP/ALC meter scale showing. Do you have the latest (rev. 1.87)?

Try turning CW-in-SSB off as explained above.

Wayne
N6KR

On Feb 13, 2014, at 3:33 PM, Antonio Matias <[hidden email]> wrote:

> Hi Jim
> sorry to trouble
>
> but no fix the problem yet
> all the same. the CMP wont get out of there, and i like to see the SWR/RF
> reading
> Some how it might need modified another item on menu or so.
> I just can´t figure what can it be...
>
>
>
>
> tnx for assistance Jim and Don
>
>
> PS: Keyer/Mic button only changes Mic gain, WPM on CW, and output PWR
> CMP button turns CMP on from 0 to 30 and N/A
>
> Nothing else doing here.
>
>
>
> 73
>
>
>
>
>
>
>
> 2014-02-13 23:24 GMT+00:00 Jim Bennett <[hidden email]>:
>
>> Tony -
>>
>> Didn't hear back from you - is the problem fixed? What you say below is
>> the way it is supposed to work - no CMP / ALC on CW, but only on SSB. While
>> on SSB, you can toggle it on and off by tapping that CMP button, as Don and
>> I mentioned.
>>
>> Jim / W6JHB
>>
>>
>> On Thursday, Feb 13, 2014, at Thursday, 11:21 AM, Antonio Matias wrote:
>>
>> happen just like that.
>> on CW i have SWR RF meter. But wen go back to SSB is changes it self to
>> CMP ALC
>>
>>
>>
>>
>> 2014-02-13 19:18 GMT+00:00 Jim Bennett <[hidden email]>:
>>
>>> How about if you go to CW mode and use that button. When I am in CW mode
>>> and press CMP I get a "N/A", and if I press and hold, it let's me hear and
>>> see my sidetone pitch.
>>>
>>>
>>> On Thursday, Feb 13, 2014, at Thursday, 11:08 AM, Antonio Matias wrote:
>>>
>>> That´s why i think there must be here some trick
>>> mine wont change CMP ALC to SWR RF wen i press CMP.
>>> It only shows CMP 0 on the VFO B line.
>>>
>>> weird
>>>
>>>
>>> Tony
>>>
>>>
>>>
>>> 2014-02-13 18:56 GMT+00:00 Jim Bennett <[hidden email]>:
>>>
>>>> So, your rig is in USB or LSB mode, right? I just set mine like that,
>>>> and if I momentarily press CMP, the meter changes to CMP/ALC and the VFO-B
>>>> display shows CMP 0. If I press CMP again, The meter goes to SWR/RF, and
>>>> the CMP 0 is replaced by the VFO-B frequency. Yours does not do that?
>>>>
>>>> On Thursday, Feb 13, 2014, at Thursday, 10:21 AM, Jim Bennett wrote:
>>>>
>>>>> Tony, press and hold the SPOT button for three seconds.
>>>>>
>>>>> Jim / W6JHB
>>>>>
>>>>>
>>>>> On Thursday, Feb 13, 2014, at Thursday, 9:41 AM, Antonio Matias
>>>> wrote:
>>>>>
>>>>>> Hello all
>>>>>> My KX3, one of this days, started to show on display the CMP ALC icons
>>>>>> Use to be with SWR and RF reading. Now only show this on CW and Data
>>>>>> have tried all to put it back.
>>>>>> On the manual says to push Keyer/Mic knob, but no success
>>>>>>
>>>>>> any idea how this append?
>>>>>>
>>>>>> PS have latest version software ON.
>>>>>>
>>>>>>
>>>>>> 73
>>>>>> Tony
>>>>>> CT1FFU
>>>>>>
>>>>>> --
>>>>>> António Matias
>>>>>>
>>>>>> CT1FFU - CR5A
>>>>>>
>>>>>> www.dxpatrol.com
>>>>>>
>>>>>> QRV: HF, 6m, 4m,2m,70cm,23cm
>>>>>> SSB, CW, MGM
>>>>>> DX, EME, Contest,Sat.
>>>>>>
>>>>>> POBOX-38
>>>>>> 2504-909
>>>>>> Caldas da Rainha
>>>>>> Portugal
>>>>>> ______________________________________________________________
>>>>>> Elecraft mailing list
>>>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>>> Post: mailto:[hidden email]
>>>>>>
>>>>>> This list hosted by: http://www.qsl.net
>>>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>>
>>>>> ______________________________________________________________
>>>>> Elecraft mailing list
>>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>> Post: mailto:[hidden email]
>>>>>
>>>>> This list hosted by: http://www.qsl.net
>>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>
>>>>
>>>
>>>
>>> --
>>> António Matias
>>>
>>> CT1FFU - CR5A
>>>
>>> www.dxpatrol.com
>>>
>>> QRV: HF, 6m, 4m,2m,70cm,23cm
>>> SSB, CW, MGM
>>> DX, EME, Contest,Sat.
>>>
>>> POBOX-38
>>> 2504-909
>>> Caldas da Rainha
>>> Portugal
>>>
>>>
>>>
>>
>>
>> --
>> António Matias
>>
>> CT1FFU - CR5A
>>
>> www.dxpatrol.com
>>
>> QRV: HF, 6m, 4m,2m,70cm,23cm
>> SSB, CW, MGM
>> DX, EME, Contest,Sat.
>>
>> POBOX-38
>> 2504-909
>> Caldas da Rainha
>> Portugal
>>
>>
>>
>
>
> --
> António Matias
>
> CT1FFU - CR5A
>
> www.dxpatrol.com
>
> QRV: HF, 6m, 4m,2m,70cm,23cm
> SSB, CW, MGM
> DX, EME, Contest,Sat.
>
> POBOX-38
> 2504-909
> Caldas da Rainha
> Portugal
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

Antonio Matias

Re: CMP ALC on display

Hi there Wayne

That solve it !!!

Now the display is ready SWR and RF.
That was not easy to find without help.

Many tnx for quick end efficient assistance.

best 73

I buy you a beer in next Fredrichshafen ham fest :-)

Tony

2014-02-14 0:09 GMT+00:00 Wayne Burdick <[hidden email]>:

> You may have "SSB+CW" turned on. From the release notes:
>
> * CW-IN-SSB TRANSMIT ADDED: This feature allows you to send CW while in
> SSB mode, which can be useful when your SSB signal cannot be copied due to
> poor conditions. The other station will hear a tone at your CW pitch. To
> enable CW-in-SSB: Locate the CW WGHT menu entry, then tap '1' (PRE) to
> alternate between "SSW +CW" (enabled) and "SSB -CW" (disabled). The default
> is disabled. Important Notes: (1) CW-in-SSB does not yet apply in SPLIT
> mode. (2) When CW-in-SSB is enabled, tapping the KEYER/MIC knob toggles
> between keyer speed and mic gain rather than between the two transmit
> metering scales (CMP/ALC and SWR/RF). The CMP/ALC scale is still shown
> temporarily whenever CMP or mic gain are adjusted.
>
> There was a bug in an earlier version of firmware that may have left the
> CMP/ALC meter scale showing. Do you have the latest (rev. 1.87)?
>
> Try turning CW-in-SSB off as explained above.
>
> Wayne
> N6KR
>
>
> On Feb 13, 2014, at 3:33 PM, Antonio Matias <[hidden email]> wrote:
>
> > Hi Jim
> > sorry to trouble
> >
> > but no fix the problem yet
> > all the same. the CMP wont get out of there, and i like to see the SWR/RF
> > reading
> > Some how it might need modified another item on menu or so.
> > I just can´t figure what can it be...
> >
> >
> >
> >
> > tnx for assistance Jim and Don
> >
> >
> > PS: Keyer/Mic button only changes Mic gain, WPM on CW, and output PWR
> > CMP button turns CMP on from 0 to 30 and N/A
> >
> > Nothing else doing here.
> >
> >
> >
> > 73
> >
> >
> >
> >
> >
> >
> >
> > 2014-02-13 23:24 GMT+00:00 Jim Bennett <[hidden email]>:
> >
> >> Tony -
> >>
> >> Didn't hear back from you - is the problem fixed? What you say below is
> >> the way it is supposed to work - no CMP / ALC on CW, but only on SSB.
> While
> >> on SSB, you can toggle it on and off by tapping that CMP button, as Don
> and
> >> I mentioned.
> >>
> >> Jim / W6JHB
> >>
> >>
> >> On Thursday, Feb 13, 2014, at Thursday, 11:21 AM, Antonio Matias
> wrote:
> >>
> >> happen just like that.
> >> on CW i have SWR RF meter. But wen go back to SSB is changes it self to
> >> CMP ALC
> >>
> >>
> >>
> >>
> >> 2014-02-13 19:18 GMT+00:00 Jim Bennett <[hidden email]>:
> >>
> >>> How about if you go to CW mode and use that button. When I am in CW
> mode
> >>> and press CMP I get a "N/A", and if I press and hold, it let's me hear
> and
> >>> see my sidetone pitch.
> >>>
> >>>
> >>> On Thursday, Feb 13, 2014, at Thursday, 11:08 AM, Antonio Matias
> wrote:
> >>>
> >>> That´s why i think there must be here some trick
> >>> mine wont change CMP ALC to SWR RF wen i press CMP.
> >>> It only shows CMP 0 on the VFO B line.
> >>>
> >>> weird
> >>>
> >>>
> >>> Tony
> >>>
> >>>
> >>>
> >>> 2014-02-13 18:56 GMT+00:00 Jim Bennett <[hidden email]>:
> >>>
> >>>> So, your rig is in USB or LSB mode, right? I just set mine like that,
> >>>> and if I momentarily press CMP, the meter changes to CMP/ALC and the
> VFO-B
> >>>> display shows CMP 0. If I press CMP again, The meter goes to SWR/RF,
> and
> >>>> the CMP 0 is replaced by the VFO-B frequency. Yours does not do that?
> >>>>
> >>>> On Thursday, Feb 13, 2014, at Thursday, 10:21 AM, Jim Bennett
> wrote:
> >>>>
> >>>>> Tony, press and hold the SPOT button for three seconds.
> >>>>>
> >>>>> Jim / W6JHB
> >>>>>
> >>>>>
> >>>>> On Thursday, Feb 13, 2014, at Thursday, 9:41 AM, Antonio Matias
> >>>> wrote:
> >>>>>
> >>>>>> Hello all
> >>>>>> My KX3, one of this days, started to show on display the CMP ALC
> icons
> >>>>>> Use to be with SWR and RF reading. Now only show this on CW and
> Data
> >>>>>> have tried all to put it back.
> >>>>>> On the manual says to push Keyer/Mic knob, but no success
> >>>>>>
> >>>>>> any idea how this append?
> >>>>>>
> >>>>>> PS have latest version software ON.
> >>>>>>
> >>>>>>
> >>>>>> 73
> >>>>>> Tony
> >>>>>> CT1FFU
> >>>>>>
> >>>>>> --
> >>>>>> António Matias
> >>>>>>
> >>>>>> CT1FFU - CR5A
> >>>>>>
> >>>>>> www.dxpatrol.com
> >>>>>>
> >>>>>> QRV: HF, 6m, 4m,2m,70cm,23cm
> >>>>>> SSB, CW, MGM
> >>>>>> DX, EME, Contest,Sat.
> >>>>>>
> >>>>>> POBOX-38
> >>>>>> 2504-909
> >>>>>> Caldas da Rainha
> >>>>>> Portugal
> >>>>>> ______________________________________________________________
> >>>>>> Elecraft mailing list
> >>>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >>>>>> Help: http://mailman.qth.net/mmfaq.htm
> >>>>>> Post: mailto:[hidden email]
> >>>>>>
> >>>>>> This list hosted by: http://www.qsl.net
> >>>>>> Please help support this email list: http://www.qsl.net/donate.html
> >>>>>
> >>>>> ______________________________________________________________
> >>>>> Elecraft mailing list
> >>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >>>>> Help: http://mailman.qth.net/mmfaq.htm
> >>>>> Post: mailto:[hidden email]
> >>>>>
> >>>>> This list hosted by: http://www.qsl.net
> >>>>> Please help support this email list: http://www.qsl.net/donate.html
> >>>>
> >>>>
> >>>
> >>>
> >>> --
> >>> António Matias
> >>>
> >>> CT1FFU - CR5A
> >>>
> >>> www.dxpatrol.com
> >>>
> >>> QRV: HF, 6m, 4m,2m,70cm,23cm
> >>> SSB, CW, MGM
> >>> DX, EME, Contest,Sat.
> >>>
> >>> POBOX-38
> >>> 2504-909
> >>> Caldas da Rainha
> >>> Portugal
> >>>
> >>>
> >>>
> >>
> >>
> >> --
> >> António Matias
> >>
> >> CT1FFU - CR5A
> >>
> >> www.dxpatrol.com
> >>
> >> QRV: HF, 6m, 4m,2m,70cm,23cm
> >> SSB, CW, MGM
> >> DX, EME, Contest,Sat.
> >>
> >> POBOX-38
> >> 2504-909
> >> Caldas da Rainha
> >> Portugal
> >>
> >>
> >>
> >
> >
> > --
> > António Matias
> >
> > CT1FFU - CR5A
> >
> > www.dxpatrol.com
> >
> > QRV: HF, 6m, 4m,2m,70cm,23cm
> > SSB, CW, MGM
> > DX, EME, Contest,Sat.
> >
> > POBOX-38
> > 2504-909
> > Caldas da Rainha
> > Portugal
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:[hidden email]
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
>
>

wayne burdick

Re: CMP ALC on display

Administrator

Antonio Matias <[hidden email]> wrote:

> That solve it !!!

Great!

> I buy you a beer in next Fredrichshafen ham fest :-)

Even better :)

Wayne
N6KR

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html