CW Monitor audio lost on Line Out after upgrade of FW release in my K3

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

CW Monitor audio lost on Line Out after upgrade of FW release in my K3

Classe Bergman
Hi,
Today I upgraded my K3 with new FW, I was using 5.38/2.86 and I installed
5.50/2.87
I then discovered that the CW Monitor audio was lost on Lin Out. First I
tought  that some settings was messed up but could not find anything. I
then downgraded my K3 to 5.38/2.86 and the CW Monitor audio was back ! I
found that if I change settings from LIN OUT = "Nor"as I normaly use  to
"=Phones", the CW Monitor audio comes back. So something have changed the
function of Line Out audio in the new FW release.
Since all audio levels follows the Front AF vol  when using  "=Phones" this
mess up levels to my soundcard in the PC. My K3 s/n 1464 have the old KIO
board without USB interface

Is this a known bug ( or maybe a feature ..) ?

73 Classe SM3GSK
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: CW Monitor audio lost on Line Out after upgrade of FW release in my K3

wayne burdick
Administrator
I believe this is corrected in the latest field-test firmware release (5.53) which I'll send you.

73,
Wayne
N6KR


On Sep 8, 2016, at 8:34 AM, Classe Bergman <[hidden email]> wrote:

> Hi,
> Today I upgraded my K3 with new FW, I was using 5.38/2.86 and I installed
> 5.50/2.87
> I then discovered that the CW Monitor audio was lost on Lin Out. First I
> tought  that some settings was messed up but could not find anything. I
> then downgraded my K3 to 5.38/2.86 and the CW Monitor audio was back ! I
> found that if I change settings from LIN OUT = "Nor"as I normaly use  to
> "=Phones", the CW Monitor audio comes back. So something have changed the
> function of Line Out audio in the new FW release.
> Since all audio levels follows the Front AF vol  when using  "=Phones" this
> mess up levels to my soundcard in the PC. My K3 s/n 1464 have the old KIO
> board without USB interface
>
> Is this a known bug ( or maybe a feature ..) ?
>
> 73 Classe SM3GSK
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: CW Monitor audio lost on Line Out after upgrade of FW release in my K3

Classe Bergman
In reply to this post by Classe Bergman
I just loaded FW 5.53 and now the Line Out audio is back. Thanks Wayne for
sending me the field-test FW.

73 Classe


2016-09-08 17:34 GMT+02:00 Classe Bergman <[hidden email]>:

> Hi,
> Today I upgraded my K3 with new FW, I was using 5.38/2.86 and I installed
> 5.50/2.87
> I then discovered that the CW Monitor audio was lost on Lin Out. First I
> tought  that some settings was messed up but could not find anything. I
> then downgraded my K3 to 5.38/2.86 and the CW Monitor audio was back ! I
> found that if I change settings from LIN OUT = "Nor"as I normaly use  to
> "=Phones", the CW Monitor audio comes back. So something have changed the
> function of Line Out audio in the new FW release.
> Since all audio levels follows the Front AF vol  when using  "=Phones"
> this mess up levels to my soundcard in the PC. My K3 s/n 1464 have the old
> KIO board without USB interface
>
> Is this a known bug ( or maybe a feature ..) ?
>
> 73 Classe SM3GSK
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: CW Monitor audio lost on Line Out after upgrade of FW release in my K3

Bill-3
Yet another example of the best product support in the world of amateur
radio!

Bill W2BLC K-Line

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]