CW TEXT DECODER

[Tobyp]

In 4.51 mcu the text decoder for cw is not working properly  in the AUTO setting.  Elecraft is aware of this.  

You can set the CWT to a setting of 3 and the decoder works fairly well.  Also,  set the speed range to 30-90.

Toby  W4CAK
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[ve3dvy]

Glad you mentioned it.

I sat in front of my K3, Manual etc  trying to get it to work  last
night.     Glad to know it just wasn't me.

On 5/26/2012 8:59 AM, Toby Pennington wrote:

> In 4.51 mcu the text decoder for cw is not working properly  in the AUTO setting.  Elecraft is aware of this.
>
> You can set the CWT to a setting of 3 and the decoder works fairly well.  Also,  set the speed range to 30-90.
>
> Toby  W4CAK
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[John_N1JM]

When you say set CWT to three, do you mean the text decode threshold?

John N1JM

Tobyp wrote

In 4.51 mcu the text decoder for cw is not working properly  in the AUTO setting.  Elecraft is aware of this.  

You can set the CWT to a setting of 3 and the decoder works fairly well.  Also,  set the speed range to 30-90.

Toby  W4CAK
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Tobyp]

Yes,  set the CW decode THRESHOLD to a setting of 3,  and the speed from 30-90 wpm and the CWT should work just fine.

I have the AGC threshold set to 14,  and SLP to 3 but don't think that does much at such a low setting.

Toby  W4CAK

[Dave wo2x]

Hi All,

Playing with the KDVR3 and understand that tx audio processing has an effect
on DVR recording playing back over the air. With my setup with mild
compression and mild EQ'ing the ALC pins on playing a reciording over the
air (recording someone and playing back over the air.).

Is there a way to pad it down to get the ALC level proper?

Thanks
Dave
wo2x

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Bruce Beford-2]

Not yet. Many of us are hoping a future firmware update will address that.
73,
Bruce, N1RX

> Playing with the KDVR3 and understand that tx audio processing has an
> effect on DVR recording playing back over the air. With my setup with
> mild compression and mild EQ'ing the ALC pins on playing a reciording
> over the air (recording someone and playing back over the air.).

> Is there a way to pad it down to get the ALC level proper?

> Thanks
> Dave
> wo2x




______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Bruce Beford-2]

Agreed. Right now, I think all you can do is kick in the attenuator and
reduce RF gain on RX before recording. Not an elegant solution at all. Maybe
with your post, it may percolate up "The List".
73,
Bruce, N1RX

-----Original Message-----
From: Dave [mailto:[hidden email]]
Sent: Monday, May 28, 2012 6:06 PM
To: Bruce Beford
Subject: Re: [Elecraft] KDVR3 output level adjust for over the air playback?

I hope they can address it in firmware. Works well except over-the-air
playbacks on rx are very hot in level

Used it when we ran a special event station a few weeks ago and the dvr was
a must!

73
Dave
wo2x

Sent from my iPhone

On May 28, 2012, at 6:55 AM, "Bruce Beford" <[hidden email]>
wrote:

> Not yet. Many of us are hoping a future firmware update will address that.
> 73,
> Bruce, N1RX
>
>> Playing with the KDVR3 and understand that tx audio processing has an
>> effect on DVR recording playing back over the air. With my setup with
>> mild compression and mild EQ'ing the ALC pins on playing a reciording
>> over the air (recording someone and playing back over the air.).
>
>> Is there a way to pad it down to get the ALC level proper?
>
>> Thanks
>> Dave
>> wo2x
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html