Elecraft

Config: VFO Link

Classic

List

Threaded

12 messages Options

Roy Morris-6

Config: VFO Link

I have installed K3 v.5.10. Presently I cannot assign VFO LINK to my PF1
button. Will this be function be available soon? Thanks. Roy Morris
W4WFB

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

wayne burdick

Re: Config: VFO Link

Administrator

I was able to do this (locate the CONFIG:VFO LNK menu entry, then hold PF1 to assign the switch to it).

Outside the menu, holding PF1 then does link/unlink.

73,
Wayne
N6KR

On Feb 19, 2015, at 11:18 AM, "Roy Morris" <[hidden email]> wrote:

> I have installed K3 v.5.10. Presently I cannot assign VFO LINK to my PF1
> button. Will this be function be available soon? Thanks. Roy Morris
> W4WFB
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Jim Sheldon

Re: Config: VFO LINK

In reply to this post by Roy Morris-6

Roy (and others) if you're doing something wrong, I am too. I can get
PF1 to work on any other item except VFO LNK. On anything else, when
you hold PF1, it beeps and you get the message PF1 SET. This doesn't
happen with the VFO LNK menu item. Holding PF1 produces the beep, but
no PF1 SET message and PF1 remains set to whatever item it was
previously set to.

FW UC 05.10, FL 01.17, d1 and d2 both 02.83 and the DVR is not installed
in my K3.

Jim - W0EB

------ Original Message ------
From: "Roy Morris" <[hidden email]>
To: [hidden email]
Sent: 2/19/2015 2:10:50 PM
Subject: [Elecraft] Config: VFO LINK

>I must be doing something wrong. I can program other Config programs to
>work in PF1 hold, but I still can't get VFO LINK to work with this
>button.
>Is there something I am missing?
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to [hidden email]

wayne burdick

Re: Config: VFO LINK

Administrator

This has been corrected for the next release.

Tnx
Wayne

----
http://www.elecraft.com

> On Feb 19, 2015, at 12:18 PM, "Jim's Desktop" <[hidden email]> wrote:
>
> Roy (and others) if you're doing something wrong, I am too. I can get PF1 to work on any other item except VFO LNK. On anything else, when you hold PF1, it beeps and you get the message PF1 SET. This doesn't happen with the VFO LNK menu item. Holding PF1 produces the beep, but no PF1 SET message and PF1 remains set to whatever item it was previously set to.
>
> FW UC 05.10, FL 01.17, d1 and d2 both 02.83 and the DVR is not installed in my K3.
>
> Jim - W0EB
>
> ------ Original Message ------
> From: "Roy Morris" <[hidden email]>
> To: [hidden email]
> Sent: 2/19/2015 2:10:50 PM
> Subject: [Elecraft] Config: VFO LINK
>
>> I must be doing something wrong. I can program other Config programs to
>> work in PF1 hold, but I still can't get VFO LINK to work with this button.
>> Is there something I am missing?
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

Rick Prather

Re: Config: VFO LINK

Thanks Wayne,

Guess I can stop trying to make it work!

Rick
K6LE

On Thu, Feb 19, 2015 at 1:34 PM, Wayne Burdick <[hidden email]> wrote:

> This has been corrected for the next release.
>
> Tnx
> Wayne
>
> ----
> http://www.elecraft.com
>
> > On Feb 19, 2015, at 12:18 PM, "Jim's Desktop" <[hidden email]> wrote:
> >
> > Roy (and others) if you're doing something wrong, I am too. I can get
> PF1 to work on any other item except VFO LNK. On anything else, when you
> hold PF1, it beeps and you get the message PF1 SET. This doesn't happen
> with the VFO LNK menu item. Holding PF1 produces the beep, but no PF1 SET
> message and PF1 remains set to whatever item it was previously set to.
> >
> > FW UC 05.10, FL 01.17, d1 and d2 both 02.83 and the DVR is not installed
> in my K3.
> >
> > Jim - W0EB
> >
> > ------ Original Message ------
> > From: "Roy Morris" <[hidden email]>
> > To: [hidden email]
> > Sent: 2/19/2015 2:10:50 PM
> > Subject: [Elecraft] Config: VFO LINK
> >
> >> I must be doing something wrong. I can program other Config programs to
> >> work in PF1 hold, but I still can't get VFO LINK to work with this
> button.
> >> Is there something I am missing?
> >>
> >> ______________________________________________________________
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:[hidden email]
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> >> Message delivered to [hidden email]
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:[hidden email]
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to [hidden email]
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

Re: K3 no SSB receive

In reply to this post by wayne burdick

OK what did I do ? Been working on cw and external noise canceller for
couple days - and just tried to listen for the TI9 on SSB - both main and
sub rx are dead. All other modes fine , Just USB or USB dead - all bands
absolutely not a trace of audio - did a couple on -off cycles no joy .

The 2.7 khz filter is selected for SSB and is functional in all other modes
both receivers.

Hank K7HP

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Re: K3 no SSB receive

On any band CW/DATA/AM receive normal both main and sub dead on SSB
either sideband. Can watch the P3 and signals obviously still coming out of
the IF but rx goes dead when MODE is tapped to USB . And I mean DEAD - not a
whisper phones or speaker RF and AF gain wide open. NB/NR on or off no
change.

Saw that W4BQF has same issue - but could not find any responses.

Hank K7HP

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Joe Subich, W4TV-4

Re: K3 no SSB receive

Check your filter assignments - CONFIG:FL # or use the
K3 Utility.

73,

... Joe, W4TV

On 2015-02-22 2:39 PM, Hank P wrote:

> On any band CW/DATA/AM receive normal both main and sub dead on SSB
> either sideband. Can watch the P3 and signals obviously still coming out
> of the IF but rx goes dead when MODE is tapped to USB . And I mean DEAD
> - not a whisper phones or speaker RF and AF gain wide open. NB/NR on or
> off no change.
>
> Saw that W4BQF has same issue - but could not find any responses.
>
> Hank K7HP
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

Elecraft mailing list

Re: K3 no SSB receive

In reply to this post by HP

did you change something?
Load new firmware?

From: Hank P <[hidden email]>
To: Elecraft <[hidden email]>
Sent: Sunday, February 22, 2015 2:39 PM
Subject: Re: [Elecraft] K3 no SSB receive

On any band CW/DATA/AM receive normal both main and sub dead on SSB
either sideband. Can watch the P3 and signals obviously still coming out of
the IF but rx goes dead when MODE is tapped to USB . And I mean DEAD - not a
whisper phones or speaker RF and AF gain wide open. NB/NR on or off no
change.

Saw that W4BQF has same issue - but could not find any responses.

Hank K7HP

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Jerry

Lost sub receiver in right headphone

In reply to this post by HP

Hello,

Does anyone have any suggestions on troubleshooting (config or Main or
"buttons") menus for this problem.

When I plug in the headphones, there is no audio from the sub receiver (sub
has been selected), however, pulling the headphones jack out 1/8 of an inch
I receive both Main and Sub in both sides of the headphones. When I remove
(deselect sub) there still is no audio on the right ear. I loaded the new
firmware, but I am not sure if I lost the "right" ear audio before or after
the firmware update. I have reversed the firmware update and got the dual PB
back.

An email has gone out to Elecraft Support with essentially the same info.

Best regards,

Jerry ,W1IE

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of Hank P
Sent: Sunday, February 22, 2015 2:40 PM
To: Elecraft
Subject: Re: [Elecraft] K3 no SSB receive

On any band CW/DATA/AM receive normal both main and sub dead on SSB
either sideband. Can watch the P3 and signals obviously still coming out of
the IF but rx goes dead when MODE is tapped to USB . And I mean DEAD - not a
whisper phones or speaker RF and AF gain wide open. NB/NR on or off no
change.

Saw that W4BQF has same issue - but could not find any responses.

Hank K7HP

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Re: K3 no SSB receive

In reply to this post by HP

FWIW - a simple restore of the current config fixed it - live and learn.

73 Hank K7HP

-----Original Message-----
From: Hank P
Sent: Sunday, February 22, 2015 12:39 PM
To: Elecraft
Subject: Re: [Elecraft] K3 no SSB receive

On any band CW/DATA/AM receive normal both main and sub dead on SSB
either sideband. Can watch the P3 and signals obviously still coming out of
the IF but rx goes dead when MODE is tapped to USB . And I mean DEAD - not a
whisper phones or speaker RF and AF gain wide open. NB/NR on or off no
change.

Saw that W4BQF has same issue - but could not find any responses.

Hank K7HP

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Bruce Meier-2

Re: K3 no SSB receive

In reply to this post by HP

The NO SSB audio also happened to me on one of my K3s. All other modes were
fine but and after a few minutes of experimenting I found out that I could
get SSB RX but only by opening up the Width beyond the 2.7kHz first filter.
As soon as the width was at or below 2.7 the audio was gone. I also
checked to see if I could open up other modes - NO. The width setting would
not go beyond my second filter which is set to kick in / out at 500 hz.
So, I did a "RESTORE CONFIGURATION" from the one that I saved just after
loading the new 5.1 firmware. That seems to have fixed it. Not sure why -
but it is working. My other K3 is running the same 5.1 firmware and has
not had the problem.

Something must have changed, but to my knowledge, I did not do anything.

73,

Bruce - N1LN

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]