Correct Link..

[David Fleming-2]

Sorry. Here's the correct link..

http://sight.net/K3Meter

David, W4SMT

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Kurt Pawlikowski]

David,

    As I don't have a K3 (<sigh>), I was wondering if you might post a
screen capture of your "baby" in action. {'-)

    Regards,

    kurtt

    Kurt Pawlikowski, AKA WB9FMC
    The Pinrod Corporation
    [hidden email]
    [phone]
    http://pinrod.com

David Fleming wrote:

> Sorry. Here's the correct link..
>
> http://sight.net/K3Meter
>
> David, W4SMT
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft   
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>  

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Doug Alspaugh]

Runs good thanks.


73 Doug N3QW


----- Original Message -----
From: "David Fleming" <[hidden email]>
To: <[hidden email]>
Sent: Saturday, November 01, 2008 11:13 PM
Subject: [Elecraft] Correct Link..

> Sorry. Here's the correct link..
>
> http://sight.net/K3Meter
>
> David, W4SMT
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft   
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Dick Dievendorff]

Nice work, David!

73 de Dick, K6KR


-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of David Fleming
Sent: Saturday, November 01, 2008 9:13 PM
To: [hidden email]
Subject: [Elecraft] Correct Link..

Sorry. Here's the correct link..

http://sight.net/K3Meter

David, W4SMT

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Julian, G4ILO]

Dick Dievendorff wrote

Nice work, David!

73 de Dick, K6KR

Yes. I lack the graphics skills to make the one in KComm look as nice, but as both programs can be run together there is no need for me to anyway. If you want a nice looking S meter use this one.

If you use the Virtual Serial Port Emulator which I already use so I can run KComm and Fldigi simultaneously, then it should be possible to run it at the same time as any other logging software (under Windows.) I have had KComm, Fldigi and the S-meter all running at the same time.

You can get the Virtual Serial Port Emulator from http://www.eterlogic.com/Products.VSPE.html.

[K7TV]

Not to discourage innovation, but I ran the program and as expected it did
only the meter on the radio already does.
I have spent too many years working with computers to think anything is neat
just because it is done on the computer.
Personally I will not use it, as I don't want to have to start a computer
program in order to use the radio, unless the computer brings something
really spectacular, such as panoramic reception, or digital modes. (While
the K3 can do digital modes internally, for my personal purposes I consider
it a useless gimmick, just like this software S-meter).


----- Original Message -----
From: "Julian, G4ILO" <[hidden email]>
To: <[hidden email]>
Sent: Sunday, November 02, 2008 11:31 AM
Subject: RE: [Elecraft] Correct Link..


>
>
>
> Dick Dievendorff wrote:
>>
>> Nice work, David!
>>
>> 73 de Dick, K6KR


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com