Cw decode text, again

[dennis rosenbalm]

I know how to get the K3 and the KX3 to decode and display text, both sending and receiving, using the internal keyer and off-the-air signals. What I need is for either radio to do it NOT using the internal keyer. I also know I could send radio-to-radio but I would rather not do that. Can anyone suggest an alternative method? Or, where can I get a third party code reader that I can connect a bug straight into?


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm-4]

Feed the sidetone audio to an external morse decoder - such as the K1EL K42

73,
Don W3FPR

On 2/3/2015 12:53 PM, GDR wrote:
> I know how to get the K3 and the KX3 to decode and display text, both sending and receiving, using the internal keyer and off-the-air signals. What I need is for either radio to do it NOT using the internal keyer. I also know I could send radio-to-radio but I would rather not do that. Can anyone suggest an alternative method? Or, where can I get a third party code reader that I can connect a bug straight into?
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Carey Magee]

Hi:

Yes.  I found out the same when I added my bug to the K3.  Paddle connected
to paddle input and bug connected to Key input.  When engaging CW Text
Decode function I can see my send code using the paddle, no problem.  I see
nothing when I use the bug.  I didn't see a config or menu setting that
pertained to this, so I am thinking that, no, you cannot see your cw decode
when using anything other than the paddle.

Thanks.

73,
Carey, K2RNY
Rochester New York
Grid: FN13ef

On Tue, Feb 3, 2015 at 12:53 PM, GDR <[hidden email]> wrote:

> I know how to get the K3 and the KX3 to decode and display text, both
> sending and receiving, using the internal keyer and off-the-air signals.
> What I need is for either radio to do it NOT using the internal keyer. I
> also know I could send radio-to-radio but I would rather not do that. Can
> anyone suggest an alternative method? Or, where can I get a third party
> code reader that I can connect a bug straight into?
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Alan Bloom]

You could just send CW with the KX3 into a dummy load and receive it on
the K3.  Readout could be either on the K3 front panel or using K3 Utility.

Alan N1AL


On 02/03/2015 10:53 AM, Carey Magee wrote:

> Hi:
>
> Yes.  I found out the same when I added my bug to the K3.  Paddle connected
> to paddle input and bug connected to Key input.  When engaging CW Text
> Decode function I can see my send code using the paddle, no problem.  I see
> nothing when I use the bug.  I didn't see a config or menu setting that
> pertained to this, so I am thinking that, no, you cannot see your cw decode
> when using anything other than the paddle.
>
> Thanks.
>
> 73,
> Carey, K2RNY
> Rochester New York
> Grid: FN13ef
>
> On Tue, Feb 3, 2015 at 12:53 PM, GDR <[hidden email]> wrote:
>
>> I know how to get the K3 and the KX3 to decode and display text, both
>> sending and receiving, using the internal keyer and off-the-air signals.
>> What I need is for either radio to do it NOT using the internal keyer. I
>> also know I could send radio-to-radio but I would rather not do that. Can
>> anyone suggest an alternative method? Or, where can I get a third party
>> code reader that I can connect a bug straight into?
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]