|
K2 Audio Distortion.
My otherwise flawless K2 # 7359 is found to have serious audio distortion problems on received and transmitted signals on 40 meter. The problem appears as soon as I go above 7171 kHz. On 7182 the problem makes SSB contacts impossible Lower frequencies do not suffer. Why ? I still haven’t checked the problem on other bands. 73 de OZ5RB, Hans ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
Hi Hans
You seem to have a known problem - with a known fix: "Weird behavior around 7185 kHz." It is due to interaction between the VFO and the PLL reference oscillator. Search for '7185' in my list http://la3za.blogspot.no/p/la3za-unofficial-guide-to-elecraft-k2_5502.html and you will find some links that will help you.
Sverre, LA3ZA
K2 #2198, K3 #3391, LA3ZA Blog: http://la3za.blogspot.com, LA3ZA Unofficial Guide to K2 modifications: http://la3za.blogspot.com/p/la3za-unofficial-guide-to-elecraft-k2.html |
|
In reply to this post by Hans Bonnesen
Hans,
That sounds like the old WAOF (Weird At One Frequency) problem. That is the region where the PLL oscillator and VFO frequencies "cross paths" near 7185 kHz. See http://www.elecraft.com/Apps/Alert11_WAOF.html. Note that this alert refers to older version A K2s, you will not find C70 on your board. If this is your problem, the audio signals will sound rather like they are 'under water' If you have something different, then ask again. With a new K2 layout, that seldom happens, so check to be certain D16 is mounted flush with the board. In addition, the components mounted on the bottom of U4 (C88, RFC15 and C91) should have leads as short as possible - make certain they are connected to the correct pins. You may need to trim all leads in the vicinity of U4 so there is nothing that would act as an 'antenna'. 73, Don W3FPR On 3/26/2014 1:44 PM, Hans Elfelt Bonnesen wrote: > K2 Audio Distortion. > > My otherwise flawless K2 # 7359 is found to have > serious audio distortion problems on received and transmitted signals on 40 meter. > The problem appears as soon as I go above 7171 kHz. On 7182 the problem makes SSB contacts impossible > Lower frequencies do not suffer. Why ? > I still haven’t checked the problem on other bands. > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
In reply to this post by Sverre Holm (LA3ZA)
Nice list you have, Sverre. My K2 (#380) didn't
suffer from this malaise (I tested it as specified) but I've done most all the others. Most recent was the AF pot mod: No parts, but fussy work on the three main boards -- and well worth the effort! 73, Phil W7ox On 3/26/14, 11:48 AM, Sverre Holm (LA3ZA) wrote: > Hi Hans > > You seem to have a known problem - with a known fix: "Weird behavior around > 7185 kHz." It is due to interaction between the VFO and the PLL reference > oscillator. Search for '7185' in my list > http://la3za.blogspot.no/p/la3za-unofficial-guide-to-elecraft-k2_5502.html > <http://la3za.blogspot.no/p/la3za-unofficial-guide-to-elecraft-k2_5502.html> > and you will find some links that will help you. > > > > > > ----- > Sverre, LA3ZA > > K2 #2198, K3 #3391, > LA3ZA Blog: http://la3za.blogspot.com, > LA3ZA Unofficial Guide to K2 modifications: http://la3za.blogspot.com/p/la3za-unofficial-guide-to-elecraft-k2.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Thanks! Since August last year I have updated the list (link in my signature field) and added several photos to make it easier to navigate.
Sverre, LA3ZA
K2 #2198, K3 #3391, LA3ZA Blog: http://la3za.blogspot.com, LA3ZA Unofficial Guide to K2 modifications: http://la3za.blogspot.com/p/la3za-unofficial-guide-to-elecraft-k2.html |
| Free forum by Nabble | Edit this page |
