EA3BLQ or K2DI Interface boards

[Doug Shields-2]

Hello everyone,

     Does anyone know of any available EA3BLQ or K2DI interface boards for
the K2?  Any sources?  Any that you might have but are not using?  Built or
unbuilt is fine.  Any leads would be most appreciated.  Thanks.

 

Doug  W4DAS

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[EricJ-2]

First, no, I don't have the boards.

I wanted them, though. I considered building the interface without
having them. I considered a lot of options, and in the end I just bought
a SignaLink USB (you need a decent soundcard anyway), built and
installed W3FPR's little LM386 audio amp on perf board in about an hour
and called it good. And it's been very good. I spend most of my
operating time on JT65 and JT9 these days and this setup has been flawless.

Sometimes it's fun to build these things. Sometimes you just want it
done and working.

BTW, Sparkfun has a nice little 10K trimpot with a knob for $1 which
works perfect with Don's board.

https://www.sparkfun.com/products/9806

Eric
KE6US



On 11/25/2013 7:07 PM, Doug Shields wrote:

> Hello everyone,
>
>       Does anyone know of any available EA3BLQ or K2DI interface boards for
> the K2?  Any sources?  Any that you might have but are not using?  Built or
> unbuilt is fine.  Any leads would be most appreciated.  Thanks.
>
>  
>
> Doug  W4DAS
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Doug,

Pauli has been SK for several years, so boards are not available unless
someone has them "squirreled away" for some later use that may never happen.

In place of Pauli's boards, I suggest that you take a look at my W3FPR
Fixed Audio Output article on my website www.w3fpr.com - boards and kits
are no longer available, but the circuit is simple enough to construct
on perfboard.   It only addresses the audio out for digital modes, but
also look at the Digital Modes switchbox article.  Between the two of
those, you can accomplish all that Pauli's interface provided.

73,
Don W3FPR

On 11/25/2013 10:07 PM, Doug Shields wrote:
> Hello everyone,
>
>       Does anyone know of any available EA3BLQ or K2DI interface boards for
> the K2?  Any sources?  Any that you might have but are not using?  Built or
> unbuilt is fine.  Any leads would be most appreciated.  Thanks.
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html