ELECRAFT K3 - LAPTOP SINGLE RS232 PORT - WITH WRITELOG AND PROPOSED P3 OPERATION

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

ELECRAFT K3 - LAPTOP SINGLE RS232 PORT - WITH WRITELOG AND PROPOSED P3 OPERATION

ZL1BHQ
Presently I am running the above, primarily as the K3-Laptop-Wtitelog operation, and wanting to interface the P3 into the station configuration. The vexing question is how ?, hence this enquiry for a possible
solution . Your thoughts will be greatly apreciated to relieve a somewhat tired brain !!.

Thanks for any help
73.
John Powell. ZL1BHQ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: ELECRAFT K3 - LAPTOP SINGLE RS232 PORT - WITH WRITELOG AND PROPOSED P3 OPERATION

Iain MacDonnell - N6ML-2
On Thu, Mar 6, 2014 at 3:18 PM, JOHN POWELL <[hidden email]> wrote:
> Presently I am running the above, primarily as the K3-Laptop-Wtitelog operation, and wanting to interface the P3 into the station configuration. The vexing question is how ?, hence this enquiry for a possible
> solution . Your thoughts will be greatly apreciated to relieve a somewhat tired brain !!.

The P3 connects to the laptop's serial port, and the K3 connects to
the P3. This is covered on page 13 of the P3 Owner's Manual.

73,

    ~iain / N6ML
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: ELECRAFT K3 - LAPTOP SINGLE RS232 PORT - WITH WRITELOG AND PROPOSED P3 OPERATION

Don Wilhelm-4
In reply to this post by ZL1BHQ
John,

Remove the RS-232 cable (PC) from the K3 and plug it into the P3. Use
the supplied RS-232 cable between the P3 and the K3.  All should be well.

73,
Don W3FPR

On 3/6/2014 6:18 PM, JOHN POWELL wrote:
> Presently I am running the above, primarily as the K3-Laptop-Wtitelog operation, and wanting to interface the P3 into the station configuration. The vexing question is how ?, hence this enquiry for a possible
> solution . Your thoughts will be greatly apreciated to relieve a somewhat tired brain !!.
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html