Hello:
I was working the NAQP today on 10M and was doing fine and then the PA got
bypassed and I got ERR 12V on the screen and to check the circuit breaker.
Well the circuit breaker is not popped. Turning the radio on and off did
nothing and I'm forced to run QRP - well, S&P. Changing bands also did
nothing to rectify the situation. The antennas are resonant with good SWR. I
checked the Config menu and the relay works when going from On to Test, and
the fan seems to work although it's very quiet.
Any help would be appreciated.
73, Jamie
WB4YDL
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html