ERR BP2

[Elecraft mailing list]

 When I turn on my K3 I get a ERR BP2  message across the bottom of the read out.. What is it telling me?   73s Bob W5RG
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[w3nf]

Bob check page 68 in manual
Lloyd W3NF

[vk2rq]

Looks like it can’t talk to the KBPF3 general coverage receiver option. Do you have one installed? If not, make sure the KBPF3 config menu is disabled. Otherwise, maybe try reseating the module? If you still see the error, it would be worthwhile to contact Elecraft customer support.

73, Matt VK2RQ
 

> On 4 Feb 2015, at 5:57 am, Bob Gibson via Elecraft <[hidden email]> wrote:
>
>  When I turn on my K3 I get a ERR BP2  message across the bottom of the read out.. What is it telling me?   73s Bob W5RG
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]