Elecraft] KX3 screen protection
Locked
 
|
I use this. Better check the size
http://www.bhphotovideo.com/c/product/16160-REG/Domke_722_15R_15x15_Color_Coded_Protective.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
Is there any way for the K3S to take its audio from the USB codec rather than the Line-in or Mic-in? I don’t see that choice in the menu. Conversely, is there any way for N1MM+/MMTTY to send ASCII data to the K3S for FSK transmission. I don’t think they are set up to do that. What I am trying to get is a one-cable (USB) solution for all modes. (CW works fine with RTS/DTR over USB.) Rich KE1B ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
On 8/11/2015 8:56 PM, KE1B wrote: > > Is there any way for the K3S to take its audio from the USB codec > rather than the Line-in or Mic-in? Exactly the same configuration as AFSK with audio via Line In but no connection to the Line In jack. Mode = DATA SubMode = AFSK A MENU:Mic Sel = Line In Mic gain set for four bars of ALC with fifth bar flickering The same settings work for other digital modes with DATA A substituted for AFSK A. 73, ... Joe, W4TV On 8/11/2015 8:56 PM, KE1B wrote: > > Is there any way for the K3S to take its audio from the USB codec > rather than the Line-in or Mic-in? I don’t see that choice in the > menu. > > Conversely, is there any way for N1MM+/MMTTY to send ASCII data to > the K3S for FSK transmission. I don’t think they are set up to do > that. What I am trying to get is a one-cable (USB) solution for all > modes. (CW works fine with RTS/DTR over USB.) > > Rich KE1B Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
In reply to this post by KE1B
See below
> Is there any way for the K3S to take its audio from the USB codec rather than the Line-in or Mic-in? I don’t see that choice in the menu. Yes, use LINE IN and don't plug any cable into the LINE IN jack on the back of the radio. it will then use the USB. > Conversely, is there any way for N1MM+/MMTTY to send ASCII data to the K3S for FSK transmission. I don’t think they are set up to do that. What I am trying to get is a one-cable (USB) solution for all modes. (CW works fine with RTS/DTR over USB.) You can use AFSK over the USB as above. 73, Lyle KK7P ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
In reply to this post by RICHH
Search on Google for
"LCD Protective Film" Buy a piece large enough and cut to size. On 8/11/2015 7:48 PM, Richard Donner wrote: > I use this. Better check the size > > http://www.bhphotovideo.com/c/product/16160-REG/Domke_722_15R_15x15_Color_Coded_Protective.html > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > > > -- > 73, > > Gary K9GS > > Greater Milwaukee DX Association: http://www.gmdxa.org > Society of Midwest Contesters: http://www.w9smc.com > CW Ops #1032 http://www.cwops.org > > ************************************************ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
In reply to this post by Joe Subich, W4TV-4
On Aug 11, 2015, at 6:17 PM, Joe Subich, W4TV <[hidden email]> wrote: > > On 8/11/2015 8:56 PM, KE1B wrote: >> >> Is there any way for the K3S to take its audio from the USB codec >> rather than the Line-in or Mic-in? > > Exactly the same configuration as AFSK with audio via Line In but > no connection to the Line In jack. > > Mode = DATA > SubMode = AFSK A > MENU:Mic Sel = Line In > Mic gain set for four bars of ALC with fifth bar flickering > I have that configuration, but when I transmit, I only get a pure carrier, no data diddling. Rich KE1B ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Re: Elecraft] KX3 screen protection
|
|
In reply to this post by RICHH
I buy I-pad screen protectors, then cut to size..
I also use them on the roof of my car to protect the roof from scratches when I use a mag mount.. Robin G1MHU ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
In reply to this post by KE1B
Hi rich and all.
Maybe you have selected the wrong audio output device. You need to change it accordingly to the new K3S USB audio interface that appeared when the USB was inserted ... and the driver was inserted. Maybe you have the audio generator AFSK level (inside the program i.e. MMTTY) or the USB audio level for the proper interface way down. But, more ... that's the best candidate! Maybe you have something other wron as you wrote that you are getting a pure carrier. This would mean that you are still setup as FSK and are getting the mark carrier without the diddling to shift carrier ... this mean that yours radio still wait for FSK manipulation and not for the AFSK tones in input. Having the radio properly setup for AFSK audio tones input will give you nothing when in TX without tones, no carrier I mean. No audio no RF ouput. The AFSK audio tones gives you the proper RF output as on SSB. Contrarily when you have the FSK submode setup you get plenty of RF but no diddles if there is not manipulation in between tones. UR radio is FSK, UR computer is AFSK. Isn't? I would double check the Radio SubMode and after the interface, levels setups whatever they live. Have a check and let us know, pse. 73 de iw1ayd Salvo PS use again the Joe's advice and list on the radio side. SubMode seems to be the key in your case at least from here. >Message: 27 >Date: Tue, 11 Aug 2015 20:16:18 -0700 >From: KE1B <[hidden email]> >To: [hidden email] >Subject: Re: [Elecraft] RTTY on the K3S >Message-ID: <[hidden email]> >Content-Type: text/plain; charset=us-ascii >On Aug 11, 2015, at 6:17 PM, Joe Subich, W4TV <[hidden email]> wrote: > > On 8/11/2015 8:56 PM, KE1B wrote: >> >> Is there any way for the K3S to take its audio from the USB codec >> rather than the Line-in or Mic-in? > > Exactly the same configuration as AFSK with audio via Line In but > no connection to the Line In jack. > > Mode = DATA > SubMode = AFSK A > MENU:Mic Sel = Line In > Mic gain set for four bars of ALC with fifth bar flickering > >I have that configuration, but when I transmit, I only get a pure carrier, no data diddling. >Rich KE1B ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
In reply to this post by KE1B
Following up on Salvo's post: Rich, I believe you said you are using
N1MM+. If that is the case, open the N1MM+ Configurer, select the Mode Control tab, and on the right side, look to see what is selected for "Mode sent to radio" for RTTY. If this is set to RTTY, N1MM+ will put the K3S into FSK D mode, which will result in an unmodulated carrier if there is nothing connected to the FSK pin on the AUX connector on the K3S. To use AFSK A, change the "Mode sent to radio" to AFSK. 73, Rich VE3KI IW1AYD wrote: > UR radio is FSK, UR computer is AFSK. Isn't? > > I would double check the Radio SubMode ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
In reply to this post by Joe Subich, W4TV-4
If you get a pure carrier you either have the data sub-mode (AFX hold) set to FSK_D or your data program is not operating correctly (generating a single tone). 73, ... Joe, W4TV On 8/11/2015 11:06 PM, Rich Seifert wrote: > > On Aug 11, 2015, at 6:17 PM, Joe Subich, W4TV <[hidden email]> wrote: > >> >> On 8/11/2015 8:56 PM, KE1B wrote: >>> >>> Is there any way for the K3S to take its audio from the USB codec >>> rather than the Line-in or Mic-in? >> >> Exactly the same configuration as AFSK with audio via Line In but >> no connection to the Line In jack. >> >> Mode = DATA >> SubMode = AFSK A >> MENU:Mic Sel = Line In >> Mic gain set for four bars of ALC with fifth bar flickering >> > > I have that configuration, but when I transmit, I only get a pure carrier, no data diddling. > > Rich KE1B > > > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
In reply to this post by Richard Ferch
On Aug 12, 2015, at 5:09 AM, Richard Ferch <[hidden email]> wrote: > Following up on Salvo's post: Rich, I believe you said you are using N1MM+. If that is the case, open the N1MM+ Configurer, select the Mode Control tab, and on the right side, look to see what is selected for "Mode sent to radio" for RTTY. If this is set to RTTY, N1MM+ will put the K3S into FSK D mode, which will result in an unmodulated carrier if there is nothing connected to the FSK pin on the AUX connector on the K3S. To use AFSK A, change the "Mode sent to radio" to AFSK. > That did it, thanks! Rich KE1B ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |