Elecraft P3 Panadapter Sneak Peek this Saturday
Locked
123
123
Elecraft P3 Panadapter Sneak Peek this Saturday
 
Administrator
|
We'll have a P3 Panadapter (or two) with us this weekend at the Santa
Barbara hamfest. The firmware is still in development, but we'll have working spectral and waterfall displays, etc. The P3 is fully integrated with the K3, and stand-alone (no computer needed). It's the same height and depth as the K3, and about 6" wide -- plenty of extra room inside for a power supply, battery, or other accessories. The display is fast and bright, with a very wide viewing angle. Come check it out if you can. For information on the hamfest, see: http://www.elecraft.com/hamfests/2009__arrl_sw_santa_barbara.htm 73, Wayne, N6KR Eric, WA6HHQ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Re: Elecraft P3 Panadapter Sneak Peek this Saturday
|
|
Great - I was only minutes away from ordering the LP-Pan solution. I am sure its quite good, but I think I'll wait and see what the P3 is all about
Vy 73's de OZ5ABO, Per K3/100 #2334 K3/100 #3229 |
Re: Elecraft P3 Panadapter Sneak Peek this Saturday
|
|
In reply to this post by wayne burdick
Two quick questions: 1. Does it have any kind of point/click capability for tuning the K3 to a signal visible on the P3? and/or 2. Does it provide any capability to feed I/Q signals to a computer for use by third party software (such as CW Skimmer). Thanks es 73, Dave AB7E ------Original Mail------ From: "Wayne Burdick" <[hidden email]> To: "Elecraft Reflector" <[hidden email]>, "QRP-L" <[hidden email]>, <[hidden email]>, <[hidden email]> Sent: Tue, 11 Aug 2009 10:40:53 -0700 Subject: [Elecraft] Elecraft P3 Panadapter Sneak Peek this Saturday We'll have a P3 Panadapter (or two) with us this weekend at the Santa Barbara hamfest. The firmware is still in development, but we'll have working spectral and waterfall displays, etc. The P3 is fully integrated with the K3, and stand-alone (no computer needed). It's the same height and depth as the K3, and about 6" wide -- plenty of extra room inside for a power supply, battery, or other accessories. The display is fast and bright, with a very wide viewing angle. Come check it out if you can. For information on the hamfest, see: http://www.elecraft.com/hamfests/2009__arrl_sw_santa_barbara.htm 73, Wayne, N6KR Eric, WA6HHQ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Re: Elecraft P3 Panadapter Sneak Peek this Saturday
|
|
>From the description I'd almost guarantee the answer to number 1 is a no.
I'm still very interested. -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of Dave - AB7E Sent: Tuesday, August 11, 2009 11:31 AM To: [hidden email]; [hidden email] Subject: Re: [Elecraft] Elecraft P3 Panadapter Sneak Peek this Saturday Two quick questions: 1. Does it have any kind of point/click capability for tuning the K3 to a signal visible on the P3? and/or 2. Does it provide any capability to feed I/Q signals to a computer for use by third party software (such as CW Skimmer). Thanks es 73, Dave AB7E ------Original Mail------ From: "Wayne Burdick" <[hidden email]> To: "Elecraft Reflector" <[hidden email]>, "QRP-L" <[hidden email]>, <[hidden email]>, <[hidden email]> Sent: Tue, 11 Aug 2009 10:40:53 -0700 Subject: [Elecraft] Elecraft P3 Panadapter Sneak Peek this Saturday We'll have a P3 Panadapter (or two) with us this weekend at the Santa Barbara hamfest. The firmware is still in development, but we'll have working spectral and waterfall displays, etc. The P3 is fully integrated with the K3, and stand-alone (no computer needed). It's the same height and depth as the K3, and about 6" wide -- plenty of extra room inside for a power supply, battery, or other accessories. The display is fast and bright, with a very wide viewing angle. Come check it out if you can. For information on the hamfest, see: http://www.elecraft.com/hamfests/2009__arrl_sw_santa_barbara.htm 73, Wayne, N6KR Eric, WA6HHQ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by wayne burdick
Could you please post a picture for those of us that can't see the P3 in person?
|
Re: Elecraft P3 Panadapter Sneak Peek this Saturday
|
Administrator
|
In reply to this post by David Gilbert
Dave - AB7E wrote:
> 1. Does it have any kind of point/click capability for tuning the > K3 to a signal visible on the P3? Yes. > 2. Does it provide any capability to feed I/Q signals to a computer > for use by third party software (such as CW Skimmer). Not at present, but this might be accommodated by a change to the I/O board on the rear panel. 73, Wayne N6KR > Subject: [Elecraft] Elecraft P3 Panadapter Sneak Peek this Saturday > > We'll have a P3 Panadapter (or two) with us this weekend at the Santa > Barbara hamfest.... ----- www.elecraft.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by wayne burdick
I am so much looking forward to the panadapter ! Any news when it is available for shipment?
Dick pa3cw
|
|
In reply to this post by wayne burdick
Now I see why everyone was dumping their LP-Pans!
This is definitely on my Christmas list. I think I've just had a Kool-Aid refill. :)) Wish I could make to the SB Hamfest.... too bad I'm in New York. How about a "sneak picture" for us East Coasters? 73 de James K2QI On Tue, Aug 11, 2009 at 1:40 PM, Wayne Burdick <[hidden email]> wrote: > We'll have a P3 Panadapter (or two) with us this weekend at the Santa > Barbara hamfest. The firmware is still in development, but we'll have > working spectral and waterfall displays, etc. > > The P3 is fully integrated with the K3, and stand-alone (no computer > needed). It's the same height and depth as the K3, and about 6" wide > -- plenty of extra room inside for a power supply, battery, or other > accessories. The display is fast and bright, with a very wide viewing > angle. > > Come check it out if you can. For information on the hamfest, see: > > http://www.elecraft.com/hamfests/2009__arrl_sw_santa_barbara.htm > > 73, > Wayne, N6KR > Eric, WA6HHQ > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- 73 de James K2QI ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
--... ...-- -.. . .--- .- -- . ...
|
Re: Elecraft P3 Panadapter Sneak Peek this Saturday
|
Administrator
|
In reply to this post by PA3CW
Later this year. We'll post more details as that gets firmed up.
We'll take some pictures at the show this weekend. 73, Eric WA6HHQ Elecraft PA3CW wrote: > I am so much looking forward to the panadapter ! Any news when it is > available for shipment? > Dick pa3cw > > > wayne burdick wrote: > >> We'll have a P3 Panadapter (or two) with us this weekend at the Santa >> Barbara hamfest. The firmware is still in development, but we'll have >> working spectral and waterfall displays, etc. >> >> The P3 is fully integrated with the K3, and stand-alone (no computer >> needed). It's the same height and depth as the K3, and about 6" wide >> -- plenty of extra room inside for a power supply, battery, or other >> accessories. The display is fast and bright, with a very wide viewing >> angle. >> >> Come check it out if you can. For information on the hamfest, see: >> >> http://www.elecraft.com/hamfests/2009__arrl_sw_santa_barbara.htm >> >> 73, >> Wayne, N6KR >> Eric, WA6HHQ >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> >> >> > > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
From: wayne burdick <[EMAIL PROTECTED]>
Date: April 28, 2007 11:25:51 AM PDT To: Elecraft Reflector <[hidden email]> Subject: K3 and its future external panadapter Sometime in the future (give us at least six months!) we'll be offering a very high-performance panadapter for the K3. Let's call it a "P3" for now. The P3 will work with any radio that has an I.F. tap, but it will be styled to match the K3. We're thinking 2/3rds of the K3's width, but the same height and depth. It may have a speaker and/or 20 A power supply. Your input on this would be very welcome. Early on in the K3 design process, we decided not to include an *internal* panadapter. Here's our reasoning: - A panadapter takes up a *lot* of front-panel real-estate. So, if you want to keep the radio at compact desktop size, you have to displace a lot of controls. The displaced controls end up buried in menus or "soft keys," making basic radio operation much more difficult. The K3 has a menu for things rarely used, but since there's no huge display, we were able to put every often-used control at your fingertips, optimally placed with respect to the LCD. A good example is our filter passband graphic, which is centered directly above the DSP controls. - An internal panadapter adds a lot of cost. Many customers, we felt, would rather have such cost be optional. If you want a panadapter, you'll be able get our P3 and set it beside the rig. Then, if you want to grab your K3 and head for the hills, you can optionally leave the panadapter on the desk (along with its speaker and power supply). - Internal panadapters often have severe performance compromises. There's at least one very new radio on the market with a panadapter that takes over the rig during sweeps. Many of them are sluggish or have user-interface issues due to lack of panel space. Our external panadapter will be an entirely independent unit, so it will not interfere with radio use at all, either operationally or due to overloading of controls. That said, it will be highly integrated with, and controlled by, the K3 (or attached computer). - We may use a display technology that offers faster rewrite speeds than you can get in an inexpensive graphic LCD such as the type most often used for internal panadapters. With the panadapter in a separate enclosure, we'll be able to use very fast logic, and possibly an exotic display such as an OLED (organic LED), without incurring any RFI problems. 73, Wayne ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Elecraft P3 Panadapter Sneak Peek this Saturday
|
|
In reply to this post by K2QI
Boy, had we had a bit more advance notice, Rose and I would
be on the way to SB! It's 1201 miles from here, but we'd likely made the trip for a peek. Also, we've just returned (Sunday) from the NW DX Convention in Spokane. 73! Ken Kopp - K0PP [hidden email] http://tinyurl.com/7lm3m5 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Re: Elecraft P3 Panadapter Sneak Peek this Saturday
|
|
In reply to this post by wayne burdick
I certainly hope Elecraft decides to implement that capability. There are enough very interesting SDR-type applications (with even more likely to surface) that it would be extremely difficult for me to justify buying a P3 (no matter how elegant) if it didn't have the ability to output the I/Q signals to a computer, given existing alternatives. 73, Dave AB7E ------Original Mail------ > 2. Does it provide any capability to feed I/Q signals to a computer > for use by third party software (such as CW Skimmer). Not at present, but this might be accommodated by a change to the I/O board on the rear panel. 73, Wayne N6KR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by E72X
Wayne,
I would vote for an included internal speaker since this would add minimal cost and make available an optional power supply. Doug -- K0DXV Gordan Hribar wrote: > From: wayne burdick <[EMAIL PROTECTED]> > Date: April 28, 2007 11:25:51 AM PDT > To: Elecraft Reflector <[hidden email]> > Subject: K3 and its future external panadapter > > Sometime in the future (give us at least six months!) we'll be > offering a very high-performance panadapter for the K3. Let's call it > a "P3" for now. The P3 will work with any radio that has an I.F. tap, > but it will be styled to match the K3. We're thinking 2/3rds of the > K3's width, but the same height and depth. It may have a speaker > and/or 20 A power supply. Your input on this would be very welcome. > Early on in the K3 design process, we decided not to include an > *internal* panadapter. Here's our reasoning: > - A panadapter takes up a *lot* of front-panel real-estate. So, if > you want to > keep the radio at compact desktop size, you have to displace a lot > of controls. > The displaced controls end up buried in menus or "soft keys," > making basic > radio operation much more difficult. The K3 has a menu for things > rarely used, > but since there's no huge display, we were able to put every > often-used control > at your fingertips, optimally placed with respect to the LCD. A > good example > is our filter passband graphic, which is centered directly above > the DSP controls. > - An internal panadapter adds a lot of cost. Many customers, we felt, > would > rather have such cost be optional. If you want a panadapter, you'll > be able > get our P3 and set it beside the rig. Then, if you want to grab > your K3 and head > for the hills, you can optionally leave the panadapter on the desk > (along with > its speaker and power supply). > > - Internal panadapters often have severe performance compromises. > There's at least one > very new radio on the market with a panadapter that takes over the > rig during sweeps. > Many of them are sluggish or have user-interface issues due to lack > of panel space. > Our external panadapter will be an entirely independent unit, so it > will not interfere > with radio use at all, either operationally or due to overloading > of controls. > That said, it will be highly integrated with, and controlled by, > the K3 (or > attached computer). > > - We may use a display technology that offers faster rewrite speeds > than you can get > in an inexpensive graphic LCD such as the type most often used for > internal panadapters. > With the panadapter in a separate enclosure, we'll be able to use > very fast logic, > and possibly an exotic display such as an OLED (organic LED), > without incurring > any RFI problems. > > 73, > Wayne > > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
> Wayne,
> I would vote for an included internal speaker since this would add > minimal cost and make available an optional power supply. Great idea. If it's decided to proceed in that direction, please include K9YC as part of the acoustic enclosure design team! It really doesn't cost any more to turn a simple speaker driver into a high-grade audio device with a baffled enclosure design. A few key presses on an HP calculator and use of the right materials goes a long way. Paul, W9AC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by Doug Person
It sounds very exciting Wayne and something I am certainly going to be
looking for. Of course, the display should be as detailed as possible, i.e. better than most of the displays found on radios that feature pan adapters. I don't think I need name them. I will say the panadapter for the flex radio is very nice, but of course it does run via the computer. I don't know whether it will be possible to have one as detailed as that but if it is it surely would be most useful. It also be nice if the K-3 could be controlled through the panadapter with some sort of point and click routine. I do think having an included power supply and speaker would be very useful. It would be easier to cart the whole thing off for work in the field as there would be no need for many boxes and many connecting wires. The idea of having an organic display is interesting -- perhaps it could then grow as needs change. Of course some means would have to be provided to control its growth as it would be rather disconcerting to come into the ham shack some evening to find that the pan adapter has grown to be 10 feet tall and 5 feet wide and is growling at you! Of course, perhaps your organic stuff would not have those characteristics. All joking aside, your ideas sound very exciting and I will look forward to see how they develop and mature. Bruce-W8FU -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of Doug Person Sent: Tuesday, August 11, 2009 6:07 PM To: Gordan Hribar Cc: [hidden email] Subject: Re: [Elecraft] P3 Info! Wayne, I would vote for an included internal speaker since this would add minimal cost and make available an optional power supply. Doug -- K0DXV Gordan Hribar wrote: > From: wayne burdick <[EMAIL PROTECTED]> > Date: April 28, 2007 11:25:51 AM PDT > To: Elecraft Reflector <[hidden email]> > Subject: K3 and its future external panadapter > > Sometime in the future (give us at least six months!) we'll be > offering a very high-performance panadapter for the K3. Let's call it > a "P3" for now. The P3 will work with any radio that has an I.F. tap, > but it will be styled to match the K3. We're thinking 2/3rds of the > K3's width, but the same height and depth. It may have a speaker > and/or 20 A power supply. Your input on this would be very welcome. > Early on in the K3 design process, we decided not to include an > *internal* panadapter. Here's our reasoning: > - A panadapter takes up a *lot* of front-panel real-estate. So, if > you want to > keep the radio at compact desktop size, you have to displace a lot > of controls. > The displaced controls end up buried in menus or "soft keys," > making basic > radio operation much more difficult. The K3 has a menu for things > rarely used, > but since there's no huge display, we were able to put every > often-used control > at your fingertips, optimally placed with respect to the LCD. A > good example > is our filter passband graphic, which is centered directly above > the DSP controls. > - An internal panadapter adds a lot of cost. Many customers, we felt, > would > rather have such cost be optional. If you want a panadapter, you'll > be able > get our P3 and set it beside the rig. Then, if you want to grab > your K3 and head > for the hills, you can optionally leave the panadapter on the desk > (along with > its speaker and power supply). > > - Internal panadapters often have severe performance compromises. > There's at least one > very new radio on the market with a panadapter that takes over the > rig during sweeps. > Many of them are sluggish or have user-interface issues due to lack > of panel space. > Our external panadapter will be an entirely independent unit, so it > will not interfere > with radio use at all, either operationally or due to overloading > of controls. > That said, it will be highly integrated with, and controlled by, > the K3 (or > attached computer). > > - We may use a display technology that offers faster rewrite speeds > than you can get > in an inexpensive graphic LCD such as the type most often used for > internal panadapters. > With the panadapter in a separate enclosure, we'll be able to use > very fast logic, > and possibly an exotic display such as an OLED (organic LED), > without incurring > any RFI problems. > > 73, > Wayne > > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Re: Elecraft P3 Panadapter Sneak Peek this Saturday
|
|
In reply to this post by wayne burdick
Gosh, I wish I lived closer to Santa Barbara but 2500 miles is a bit too far
for a weekend jaunt! It certainly sounds very exciting. I am looking forward to further details and developments as they occur and am very much interested in acquiring one when it becomes available. Bruce-W8FU -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of Wayne Burdick Sent: Tuesday, August 11, 2009 2:58 PM To: Dave - AB7E Cc: [hidden email] Subject: Re: [Elecraft] Elecraft P3 Panadapter Sneak Peek this Saturday Dave - AB7E wrote: > 1. Does it have any kind of point/click capability for tuning the > K3 to a signal visible on the P3? Yes. > 2. Does it provide any capability to feed I/Q signals to a computer > for use by third party software (such as CW Skimmer). Not at present, but this might be accommodated by a change to the I/O board on the rear panel. 73, Wayne N6KR > Subject: [Elecraft] Elecraft P3 Panadapter Sneak Peek this Saturday > > We'll have a P3 Panadapter (or two) with us this weekend at the Santa > Barbara hamfest.... ----- www.elecraft.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by Bruce McLaughlin-2
> ... The idea
> of having an organic display is interesting -- perhaps it could then grow as > needs change. Of course some means would have to be provided to control its > growth as it would be rather disconcerting to come into the ham shack some > evening to find that the pan adapter has grown to be 10 feet tall and 5 feet > wide and is growling at you! If you listen carefully, the growl is saying, "Feed me, Seymour!" 73, Lyle KK7P (who never studied dentistry...) ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by wayne burdick
ALELUYA !!! Finally what all of us has been waiting,a real panadapter to see the band,I will pray for some one who could go to that show and take good pictures to post on the web,I want to see how pretty that will look,I am on the list of future buyers for sure,congratulations once again Wayne and Eric.
AD4C "The difference between genius and stupidity is that genius has its limits".. -- Albert Einstein --- On Tue, 8/11/09, Wayne Burdick <[hidden email]> wrote: From: Wayne Burdick <[hidden email]> Subject: [Elecraft] Elecraft P3 Panadapter Sneak Peek this Saturday To: "Elecraft Reflector" <[hidden email]> Cc: "QRP-L" <[hidden email]>, [hidden email], [hidden email] Date: Tuesday, August 11, 2009, 5:40 PM We'll have a P3 Panadapter (or two) with us this weekend at the Santa Barbara hamfest. The firmware is still in development, but we'll have working spectral and waterfall displays, etc. The P3 is fully integrated with the K3, and stand-alone (no computer needed). It's the same height and depth as the K3, and about 6" wide -- plenty of extra room inside for a power supply, battery, or other accessories. The display is fast and bright, with a very wide viewing angle. Come check it out if you can. For information on the hamfest, see: http://www.elecraft.com/hamfests/2009__arrl_sw_santa_barbara.htm 73, Wayne, N6KR Eric, WA6HHQ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Re: Elecraft P3 Panadapter Sneak Peek this Saturday
|
|
In reply to this post by wayne burdick
Wayne & Eric, tell the BBQ man to bring more food. I wasn't planning to go
but now that you are going to unveil the P3, I'll be there with bells on. You should probably get a kickback from SBARC for doubling the attendees as a result of this announcement. 73, Fred AE6IC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Elecraft P3 Panadapter Sneak Peek this Saturday
|
|
In reply to this post by Eric Swartz - WA6HHQ
OK - times up! It's after Noon out there! Surely there is someone at the
hamfest with an iPhone, Blackberry or something else that can snap a photo and post it somewhere! Or - did all the "feedback" cancel the showing? Please, do it now and put us out of our collective misery - please! 73 -- Don N4HH K3/100 #83 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
«
Return to [K3]
|
1 view|%1 views
| Free forum by Nabble | Edit this page |