FS XV50 and XV144

[Gregg Marco W6IZT]

I have for sale an XV50 and an XV144 for sale. Asking $300 each plus
packaging and shipping from Marietta GA. Please contact me off list.

 

Gregg

W6IZT

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[John Santillo]

 
Hello all,

For the KXV3 transverter ports to be operational, should the KXV command be
set to "test" instead of normal?  The BNC I/O ports don't seem to work
unless it's put into test mode.

Comments appreciated.


73,

John
N2HMM
 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dave-3]

No you dont have to for "normal" transverter operation.

When I set the transverter power setting in the menu (config:XVn power) to
low power (<=1.5mW) the xverter ports are automatically activated

Dave

ww2r

Date: Thu, 7 Jun 2012 11:50:18 -0400
From: "John Santillo" <[hidden email]>
Subject: [Elecraft] KXV3 Question
To: "'Elecraft Reflector'" <[hidden email]>
Message-ID: <[hidden email]>
Content-Type: text/plain; charset="us-ascii"


Hello all,

For the KXV3 transverter ports to be operational, should the KXV command be
set to "test" instead of normal?  The BNC I/O ports don't seem to work
unless it's put into test mode.

Comments appreciated.


73,

John
N2HMM


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Edward R Cole]

John, N2HMM, did you set up the CONFIG settings for transverters:
XV1 = ON
XV1 RF = frequency band of the transverter (e.g. 144)
XV1 IF = IF frequency the K3 will operate (e.g. 28)
XV1 PWR = L 1.50  for 1.5mw max
XV1 ADR = trn x, where x = 1 thru 9

each transverter gets a different XVx setting (i.e XV1 for 144, XV2
for 222, XV3 for 432 etc up to XV9

If these settings have not been done the KXV3 will not operate.


73, Ed - KL7UW, WD2XSH/45
======================================
BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
EME: 50-1.1kw?, 144-1.4kw, 432-QRT, 1296-?, 3400-?
DUBUS Magazine USA Rep [hidden email]
"Kits made by KL7UW" http://www.kl7uw.com/kits.htm
======================================
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Gregg Marco W6IZT]

I have for sale an XV50 and an XV144 for sale. Asking $300 each plus
packaging and shipping from Marietta GA. Please contact me off list.

 

Gregg

W6IZT

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Gregg Marco W6IZT]

Both pieces have been sold

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Gregg Marco W6IZT
Sent: Thursday, June 14, 2012 1:25 PM
To: 'Elecraft Reflector'
Subject: [Elecraft] FS XV50 and XV144


I have for sale an XV50 and an XV144 for sale. Asking $300 each plus
packaging and shipping from Marietta GA. Please contact me off list.

 

Gregg

W6IZT

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html