Filter Placement in K3

[Roy Morris-6]

As long as the roofing filters are placed in bandwidth order, can filter slots be bypassed in anticipation of placing filters in the slots later?  For example:

Slot #1 Not used - reserved for FM filter
Slot #2 6Khz
Slot #3 2.7 Khz
Slot #4 Not used - reserved for future filter
Slot #5 .5Khz

Roy Morris  W4WFB
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Greg - AB7R]

Hi Roy,

Yes..this is fine.  But take care when setting the filter parameters in the
CONFIG menu.  Also, when looking down into the radio with the front facing
you, slot 1 is on the right and slot 5 is on the left.

73
Greg
AB7R


-----Original Message-----
From: [hidden email]
[mailto:[hidden email]]On Behalf Of Roy Morris
Sent: Saturday, November 17, 2007 9:39 AM
To: [hidden email]
Subject: [Elecraft] Filter Placement in K3


As long as the roofing filters are placed in bandwidth order, can filter
slots be bypassed in anticipation of placing filters in the slots later?
For example:

Slot #1 Not used - reserved for FM filter
Slot #2 6Khz
Slot #3 2.7 Khz
Slot #4 Not used - reserved for future filter
Slot #5 .5Khz

Roy Morris  W4WFB
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Craig Rairdin]

Yes, you can skip slots.

I operated for a while with FL1 and FL5 the only slots occupied. I've since
filed FL3 and FL4. FL2 is empty.

Craig
NZ0R
K3 #25

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Roy Morris
Sent: Saturday, November 17, 2007 11:39 AM
To: [hidden email]
Subject: [Elecraft] Filter Placement in K3


As long as the roofing filters are placed in bandwidth order, can filter
slots be bypassed in anticipation of placing filters in the slots later?
For example:

Slot #1 Not used - reserved for FM filter
Slot #2 6Khz
Slot #3 2.7 Khz
Slot #4 Not used - reserved for future filter
Slot #5 .5Khz

Roy Morris  W4WFB
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com