Elecraft

Final attempt at SOS !!!!

Classic

List

Threaded

14 messages Options

David Glasser

Final attempt at SOS !!!!

HELP NEEDED IN ORLANDO FLORIDA!!
Hi everyone
I am trying to ready myself for a K3S that I hope to have delivered in the not too distant future. Hooray!!
The problem I face is that I really am a rookie and I need help, by way of discussion and some "in shack" visual time as well.
Is there anyone who lives in Orlando that is running a K3S who would be willing to give up some precious time to assist me in this crucial set up period?
I can be contacted on:

[hidden email]<mailto:[hidden email]>

I would appreciate your generosity

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Bob N3MNT

Re: Final attempt at SOS !!!!

The K3S is usable out of the box. The best way to use it is to connect it per the manual then use it. Over time you will find things you wish to tweak. Look them up in the manual and learn them as needed. All the Elecraft radios are ready to use out of the box. Everyone sets their slightly differently ( filters, gains, macros etc) . Use it and make it yours as you gain experience.

Elecraft mailing list

Re: Final attempt at SOS !!!!

Believe me, the K3S and the K3 factory assembled are eye candy and User friendly. Enjoy the initial experience at your own pace. IT IS wonderful.
Mel, K6KBE

From: Bob N3MNT <[hidden email]>
To: [hidden email]
Sent: Saturday, November 28, 2015 3:45 PM
Subject: Re: [Elecraft] Final attempt at SOS !!!!

The K3S is usable out of the box. The best way to use it is to connect it
per the manual then use it. Over time you will find things you wish to
tweak. Look them up in the manual and learn them as needed. All the
Elecraft radios are ready to use out of the box. Everyone sets their
slightly differently ( filters, gains, macros etc) . Use it and make it
yours as you gain experience.

--
View this message in context: http://elecraft.365791.n2.nabble.com/Final-attempt-at-SOS-tp7610900p7610901.html
Sent from the Elecraft mailing list archive at Nabble.com.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Robin Moseley

Re: Final attempt at SOS !!!!

In reply to this post by David Glasser

I will fly out if it is an expensed trip :)

Robin G1MHU

-----Original Message-----
From: David Glasser
Sent: Saturday, November 28, 2015 11:26 PM
To: [hidden email]
Subject: [Elecraft] Final attempt at SOS !!!!

HELP NEEDED IN ORLANDO FLORIDA!!
Hi everyone
I am trying to ready myself for a K3S that I hope to have delivered in the
not too distant future. Hooray!!
The problem I face is that I really am a rookie and I need help, by way of
discussion and some "in shack" visual time as well.
Is there anyone who lives in Orlando that is running a K3S who would be
willing to give up some precious time to assist me in this crucial set up
period?
I can be contacted on:

[hidden email]<mailto:[hidden email]>

I would appreciate your generosity

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

k6dgw

Re: Final attempt at SOS !!!!

OK David ... assuming you are not disabled in some way [for the record,
I am], assembling a K3(S) is not hard and it will work just fine for you
"right out of the box." The factory defaults work great, I used them
for several years before digging into the menus.

I recommend you separate the screws, nuts, and lock washers into
separate bins by size, a muffin tin or egg carton works well, just don't
put ESD sensitive components into Styrofoam. Go slow [this is not a
sprint], ban the vacuum from your shack until done, and defer working on
it after a beer or a glass of wine. :-) Just follow the build
instructions exactly, and no fooling, check them off.

If your concerns are about shack wiring and usage after build, consult
this group, be as specific as you can [I recommend one question at a
time, it seems to lower the hijack rate of your need]. If you've got
locals, go there first. Feel free to ask me why I know this.

You're K3(s) will work just great out-of-the-box.

73,

Fred K6DGW
- Northern California Contest Club
- CU in the Cal QSO Party 1-2 Oct 2016
- www.cqp.org

> -----Original Message----- From: David Glasser
> Sent: Saturday, November 28, 2015 11:26 PM
> To: [hidden email]
> Subject: [Elecraft] Final attempt at SOS !!!!
>
> HELP NEEDED IN ORLANDO FLORIDA!!
> Hi everyone
> I am trying to ready myself for a K3S that I hope to have delivered in
> the not too distant future. Hooray!!
> The problem I face is that I really am a rookie and I need help, by way
> of discussion and some "in shack" visual time as well.
> Is there anyone who lives in Orlando that is running a K3S who would be
> willing to give up some precious time to assist me in this crucial set
> up period?
> I can be contacted on:
>
> [hidden email]<mailto:[hidden email]>
>
> I would appreciate your generosity

Kevin Stover

Re: Final attempt at SOS !!!!

In reply to this post by David Glasser

David,

Are you new to Ham Radio or just the K3(s)?
First rule in Ham Radio and specifically the Elecraft products. There
are no shortcuts.
If you're buying the kit or assembled version first step always is to
read the manuals, both assembly and operators.
They're free for the downloading from the Elecraft site.

I would also add Fred Cady's books on the K3 to the required reading list.

If after reading all you can from these good sources on the K3 you still
feel the need for help then this mailing list is available.

If this is your first Ham Radio ever you need to spend some time with
the ARRL Operating Manual before ever getting on the air. The K3 is
possibly the most configurable radio ever built. You will be doing
yourself and it a disservice by jumping before looking.

On 11/28/2015 5:26 PM, David Glasser wrote:

--
R. Kevin Stover
AC0H
ARRL
FISTS #11993
SKCC #215
NAQCC #3441

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Jim Brown-10

Re: Final attempt at SOS !!!!

In reply to this post by Robin Moseley

> The problem I face is that I really am a rookie and I need help, by
> way of discussion and some "in shack" visual time as well.

Your new rig will come out of the box ready to TX, but you will need to
hook up a paddle, mic, computer, and antenna.

Like any complex piece of gear, the first move is ALWAYS to STUDY THE
MANUAL. It will tell you how to hook stuff up to the radio, how the
controls work, how the meters work, etc. This is vital stuff, so take
your time with it. You can even get a running start by downloading the
manual from the Elecraft website and studying it while you wait for UPS. :)

Yes, there are menus and options, but they mostly are for things you add
to the radio, or different ways you want the radio to work. Leave this
stuff for later.

73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Lynn W. Taylor, WB6UUT

Re: Final attempt at SOS !!!!

On 11/28/2015 7:54 PM, Jim Brown wrote:
> Your new rig will come out of the box ready to TX, but you will need
> to hook up a paddle, mic, computer, and antenna.
Depends on what you want to do.

Personally, don't need a paddle or a microphone.

73 -- Lynn
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Ian

Re: Final attempt at SOS !!!!

In reply to this post by Bob N3MNT

Get KE7X's very fb book also - will really add to your understanding.
73, Ian N8IK

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of Bob
N3MNT
Sent: Saturday, November 28, 2015 18:45
To: [hidden email]
Subject: Re: [Elecraft] Final attempt at SOS !!!!

The K3S is usable out of the box. The best way to use it is to connect it
per the manual then use it. Over time you will find things you wish to
tweak. Look them up in the manual and learn them as needed. All the
Elecraft radios are ready to use out of the box. Everyone sets their
slightly differently ( filters, gains, macros etc) . Use it and make it
yours as you gain experience.

--
View this message in context:
http://elecraft.365791.n2.nabble.com/Final-attempt-at-SOS-tp7610900p7610901.
html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

James Rogers

Re: Final attempt at SOS !!!!

In reply to this post by David Glasser

I know Orlando has an amateur radio club. I would suggest you join that
club and seek out an "elmer" who would mentor you as you gain
experience. You can always rely on the people on this reflector to
assist you. The manual is very good, but if you have a question then
ask it and give a reference page number. We will break it down for you.
You are very welcome to note my e-mail address and post any concerns to
me. You might start by telling us what modes you will be operating at
first. Will you be operating digital, voice, or CW? Have you put up
antennas for the bands you plan to operate? Glad to have you on board!

73s Jim, W4ATK
62 great years in amateur radio
K-Line

On 11/28/2015 5:26 PM, David Glasser wrote:

> HELP NEEDED IN ORLANDO FLORIDA!!
> Hi everyone
> I am trying to ready myself for a K3S that I hope to have delivered in the not too distant future. Hooray!!
> The problem I face is that I really am a rookie and I need help, by way of discussion and some "in shack" visual time as well.
> Is there anyone who lives in Orlando that is running a K3S who would be willing to give up some precious time to assist me in this crucial set up period?
> I can be contacted on:
>
> [hidden email]<mailto:[hidden email]>
>
> I would appreciate your generosity
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

Joe Subich, W4TV-4

Re: Final attempt at SOS !!!!

Orlando is also a fairly large geographic area. There are plenty of
K3 users in the area but "hands on time" is impractical for someone
who might live in eastern Seminole County or northern Lake County,
etc. Given the road situation, travel time to "the Disney area" would
amount to an hour or more *each way* ... might as well be asking for
help from the Tampa area.

Careful study of the excellent Elecraft manuals along with e-mail
assistance here is far more practical unless you can find another
user in southern Orange County, northern Osceola County or Polk County.

73,

... Joe, W4TV

On 11/29/2015 8:05 AM, Jim Rogers wrote:

> I know Orlando has an amateur radio club. I would suggest you join that
> club and seek out an "elmer" who would mentor you as you gain
> experience. You can always rely on the people on this reflector to
> assist you. The manual is very good, but if you have a question then
> ask it and give a reference page number. We will break it down for you.
> You are very welcome to note my e-mail address and post any concerns to
> me. You might start by telling us what modes you will be operating at
> first. Will you be operating digital, voice, or CW? Have you put up
> antennas for the bands you plan to operate? Glad to have you on board!
>
> 73s Jim, W4ATK
> 62 great years in amateur radio
> K-Line
>
> On 11/28/2015 5:26 PM, David Glasser wrote:
>> HELP NEEDED IN ORLANDO FLORIDA!!
>> Hi everyone
>> I am trying to ready myself for a K3S that I hope to have delivered in
>> the not too distant future. Hooray!!
>> The problem I face is that I really am a rookie and I need help, by
>> way of discussion and some "in shack" visual time as well.
>> Is there anyone who lives in Orlando that is running a K3S who would
>> be willing to give up some precious time to assist me in this crucial
>> set up period?
>> I can be contacted on:
>>
>> [hidden email]<mailto:[hidden email]>
>>
>> I would appreciate your generosity
>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

Larry (K8UT)

Re: Final attempt at SOS !!!!

If you are a visual learner, you might also consider watching YouTube videos
about the K3S. A quick search shows that there are lots of hams - maybe not
in Orlando - who are willing to assist you.

-larry (K8UT)
-----Original Message-----
From: Joe Subich, W4TV
Sent: Sunday, November 29, 2015 9:45 AM
To: [hidden email]
Subject: Re: [Elecraft] Final attempt at SOS !!!!

Orlando is also a fairly large geographic area. There are plenty of
K3 users in the area but "hands on time" is impractical for someone
who might live in eastern Seminole County or northern Lake County,
etc. Given the road situation, travel time to "the Disney area" would
amount to an hour or more *each way* ... might as well be asking for
help from the Tampa area.

Careful study of the excellent Elecraft manuals along with e-mail
assistance here is far more practical unless you can find another
user in southern Orange County, northern Osceola County or Polk County.

73,

... Joe, W4TV

On 11/29/2015 8:05 AM, Jim Rogers wrote:

Ian

Re: Final attempt at SOS !!!!

If you're building the kit there's a PDF at
http://www.n8ik.net/kitbuilding.php of how I did mine.
73, Ian N8IK

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of Larry
Gauthier (K8UT)
Sent: Sunday, November 29, 2015 12:41
To: [hidden email]; Joe Subich, W4TV <[hidden email]>
Subject: Re: [Elecraft] Final attempt at SOS !!!!

If you are a visual learner, you might also consider watching YouTube videos
about the K3S. A quick search shows that there are lots of hams - maybe not
in Orlando - who are willing to assist you.

-larry (K8UT)
-----Original Message-----
From: Joe Subich, W4TV
Sent: Sunday, November 29, 2015 9:45 AM
To: [hidden email]
Subject: Re: [Elecraft] Final attempt at SOS !!!!

Orlando is also a fairly large geographic area. There are plenty of
K3 users in the area but "hands on time" is impractical for someone
who might live in eastern Seminole County or northern Lake County,
etc. Given the road situation, travel time to "the Disney area" would
amount to an hour or more *each way* ... might as well be asking for
help from the Tampa area.

Careful study of the excellent Elecraft manuals along with e-mail
assistance here is far more practical unless you can find another
user in southern Orange County, northern Osceola County or Polk County.

73,

... Joe, W4TV

On 11/29/2015 8:05 AM, Jim Rogers wrote:

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

David Ahrendts

Re: Final attempt at SOS !!!!

David, you’ve gotten some great advice here. In the last year I’ve built: KX3, KPA500, KXPA100, PX3, W2, KAT500, K3S and a P3.
Best advice I can give is to make a place/space where you can separate all of the parts into understandable cups or trays, or something of your choice, and then label them. You’ll be dealing with lots of small screws and nuts and washers. Many look a like, but they’re not. I used my wife’s muffin trays — couple of them — and then you can quickly separate everything before you begin assembly to make sure when they call for a specific screw and a specific washer, you’ll know where they are in an instant.
Know the Elecraft assembly manuals are very good. Really first class. They do ship a black-and-white manual, but I believe the download PDF is a color manual which does help in some rare instances. Best of luck with your K3S. Do not hesitate to reach out on this list or directly. Happy to assist.

David Ahrendts, KC0XT, Los Angeles
K3S #10125

> On Nov 29, 2015, at 12:13 PM, Ian <[hidden email]> wrote:
>
> If you're building the kit there's a PDF at
> http://www.n8ik.net/kitbuilding.php of how I did mine.
> 73, Ian N8IK
>
>
> -----Original Message-----
> From: Elecraft [mailto:[hidden email]] On Behalf Of Larry
> Gauthier (K8UT)
> Sent: Sunday, November 29, 2015 12:41
> To: [hidden email]; Joe Subich, W4TV <[hidden email]>
> Subject: Re: [Elecraft] Final attempt at SOS !!!!
>
> If you are a visual learner, you might also consider watching YouTube videos
> about the K3S. A quick search shows that there are lots of hams - maybe not
> in Orlando - who are willing to assist you.
>
> -larry (K8UT)
> -----Original Message-----
> From: Joe Subich, W4TV
> Sent: Sunday, November 29, 2015 9:45 AM
> To: [hidden email]
> Subject: Re: [Elecraft] Final attempt at SOS !!!!
>
>
> Orlando is also a fairly large geographic area. There are plenty of
> K3 users in the area but "hands on time" is impractical for someone
> who might live in eastern Seminole County or northern Lake County,
> etc. Given the road situation, travel time to "the Disney area" would
> amount to an hour or more *each way* ... might as well be asking for
> help from the Tampa area.
>
> Careful study of the excellent Elecraft manuals along with e-mail
> assistance here is far more practical unless you can find another
> user in southern Orange County, northern Osceola County or Polk County.
>
> 73,
>
> ... Joe, W4TV
>
>
> On 11/29/2015 8:05 AM, Jim Rogers wrote:
>> I know Orlando has an amateur radio club. I would suggest you join that
>> club and seek out an "elmer" who would mentor you as you gain
>> experience. You can always rely on the people on this reflector to
>> assist you. The manual is very good, but if you have a question then
>> ask it and give a reference page number. We will break it down for you.
>> You are very welcome to note my e-mail address and post any concerns to
>> me. You might start by telling us what modes you will be operating at
>> first. Will you be operating digital, voice, or CW? Have you put up
>> antennas for the bands you plan to operate? Glad to have you on board!
>>
>> 73s Jim, W4ATK
>> 62 great years in amateur radio
>> K-Line
>>
>> On 11/28/2015 5:26 PM, David Glasser wrote:
>>> HELP NEEDED IN ORLANDO FLORIDA!!
>>> Hi everyone
>>> I am trying to ready myself for a K3S that I hope to have delivered in
>>> the not too distant future. Hooray!!
>>> The problem I face is that I really am a rookie and I need help, by
>>> way of discussion and some "in shack" visual time as well.
>>> Is there anyone who lives in Orlando that is running a K3S who would
>>> be willing to give up some precious time to assist me in this crucial
>>> set up period?
>>> I can be contacted on:
>>>
>>> [hidden email]<mailto:[hidden email]>
>>>
>>> I would appreciate your generosity
>>>
>>>
>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[hidden email]
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to [hidden email]
>>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

David Ahrendts [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]