Firmware Update ?

[Fred, KC2QFR]

I have Elecraft K3 Utility Version 1.13.2.27

MCU 4.48, FPF 1.15, DSP1 2.73 shows as installed and available when I check
versions.

Elecraft site says

Current K3 Firmware Revisions

MCU 4.60 / DSP 2.80, 11/17/2012

Latest Production Release

This release will automatically be recognized by K3 Utility.

Why does it not display when I click check versions now?

I never had this issue before.

K3 SN02266

TU & 73 de Fred WY2E
.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Iain MacDonnell - N6ML-2]

On Mon, Apr 1, 2013 at 11:04 AM, Fred Lauricella
<[hidden email]> wrote:

> I have Elecraft K3 Utility Version 1.13.2.27
>
> MCU 4.48, FPF 1.15, DSP1 2.73 shows as installed and available when I check
> versions.
>
> Elecraft site says
>
> Current K3 Firmware Revisions
>
> MCU 4.60 / DSP 2.80, 11/17/2012
>
> Latest Production Release
>
> This release will automatically be recognized by K3 Utility.
>
> Why does it not display when I click check versions now?

Did you "Copy New Files from Elecraft" first?

73,

    ~iain / N6ML
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Fred, KC2QFR]

Thanks Iain, that worked. I just forgot to that. So simple.

73 de Fred WY2E


On Mon, Apr 1, 2013 at 2:07 PM, iain macdonnell - N6ML <[hidden email]>wrote:

> On Mon, Apr 1, 2013 at 11:04 AM, Fred Lauricella
> <[hidden email]> wrote:
> > I have Elecraft K3 Utility Version 1.13.2.27
> >
> > MCU 4.48, FPF 1.15, DSP1 2.73 shows as installed and available when I
> check
> > versions.
> >
> > Elecraft site says
> >
> > Current K3 Firmware Revisions
> >
> > MCU 4.60 / DSP 2.80, 11/17/2012
> >
> > Latest Production Release
> >
> > This release will automatically be recognized by K3 Utility.
> >
> > Why does it not display when I click check versions now?
>
> Did you "Copy New Files from Elecraft" first?
>
> 73,
>
>     ~iain / N6ML
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Fred,

The files that are displayed are those in your computer - in the folder
identified in the folder bar in K3 Utility.
If you click "Copy New Files from Elecraft", the latest release version
will be downloaded into that identified folder on your computer.
Once that has happened, you should see the new files listed.  You should
normally load All Firmware to the K3, rather than the Load New" selection.

73,
Don W3FPR

On 4/1/2013 2:04 PM, Fred Lauricella wrote:

> I have Elecraft K3 Utility Version 1.13.2.27
>
> MCU 4.48, FPF 1.15, DSP1 2.73 shows as installed and available when I check
> versions.
>
> Elecraft site says
>
> Current K3 Firmware Revisions
>
> MCU 4.60 / DSP 2.80, 11/17/2012
>
> Latest Production Release
>
> This release will automatically be recognized by K3 Utility.
>
> Why does it not display when I click check versions now?
>
> I never had this issue before.
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html