Firmware for P3TXMON function

[Jobst Vandrey-2]

Looking at the software page for the P3, do we load the Beta 1.50 version
(July 29th 2015 dated) for the TXMON capability, or is there something else
in the works?

As a side note, I hope that Elecraft eventually gets pictures up on the web
site show casing the TX monitor function for the P3.  In addition, the FAQ
says that this function will now work with any transceiver.  During Dayton,
the FAQ said that the TXMON function would only work with the K3 so
highlighting this change might be a nice thing to do to expand the market.

73s

Jobst
AC0LP
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Matt Zilmer-2]

1.50 is the P3 firmware rev we're using in Field Test right now.

73,
matt
W6NIA

On Mon, 3 Aug 2015 09:21:59 -0500, you wrote:

>Looking at the software page for the P3, do we load the Beta 1.50 version
>(July 29th 2015 dated) for the TXMON capability, or is there something else
>in the works?
>

Matt Zilmer, W6NIA
www.elecraft.com
831-763-4211  x129


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Paul Saffren N6HZ]

Hi Jobst,

You should download the P3 1.50 BETA firmware.  Instructions on downloading/installing BETA firmware along with the link can be found at the Elecraft firmware page P3 1.50 July 29, 2015

73,

Paul N6HZ

[Dan Maase AC6DM]

Have you loaded the new SVGA firmware 1.24?  You need this as well as the P3 firmware 1.50 for the SVGA to function correctly.
I've installed both and have not observed the problems reported.
73,
Dan AC6DM