Elecraft

Getting Logger+ tx audio via K3s USB audio codec

Classic

List

Threaded

7 messages Options

N1EU

Getting Logger+ tx audio via K3s USB audio codec

Would appreciate any tips to getting the N1MM Logger+ soundcard voice
keyer properly keying/driving my K3s via the internal USB soundcard.
My USB-connected K3s is running fine with N1MM Logger+ and "USB Audio
CODEC" selected as my Radio 1 output device. I've got MIC + LIN On
and I see the wav file properly moving the level meter in Windows
sound and the level is set at 100, but no tx audio on the K3s. It
appears that everything is working as it should in Logger+. Is there
a separate LIN level control I need to adjust on the K3s or some other
reason I'm not seeing tx audio being driven?

Thanks & 73,
Barry N1EU
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Mike Cox

Re: Getting Logger+ tx audio via K3s USB audio codec

Don't have a LINE IN plug inserted in the K3, otherwise it uses it
instead of the internal sound card.

73,
Mike, AB9V

On 12/12/2015 8:46 AM, Barry N1EU wrote:

> Would appreciate any tips to getting the N1MM Logger+ soundcard voice
> keyer properly keying/driving my K3s via the internal USB soundcard.
> My USB-connected K3s is running fine with N1MM Logger+ and "USB Audio
> CODEC" selected as my Radio 1 output device. I've got MIC + LIN On
> and I see the wav file properly moving the level meter in Windows
> sound and the level is set at 100, but no tx audio on the K3s. It
> appears that everything is working as it should in Logger+. Is there
> a separate LIN level control I need to adjust on the K3s or some other
> reason I'm not seeing tx audio being driven?
>
> Thanks & 73,
> Barry N1EU
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Cady, Fred-2

Re: Getting Logger+ tx audio via K3s USB audio codec

In reply to this post by N1EU

Hi Barry,
Make sure you don't have a cable plugged into the K3s Line In jack.
73,
Fred KE7X

For all KE7X Elecraft books, see www.ke7x.com

________________________________________
From: Elecraft <[hidden email]> on behalf of Barry N1EU <[hidden email]>
Sent: Saturday, December 12, 2015 6:46 AM
To: elecraft; [hidden email]
Subject: [Elecraft] Getting Logger+ tx audio via K3s USB audio codec

Would appreciate any tips to getting the N1MM Logger+ soundcard voice
keyer properly keying/driving my K3s via the internal USB soundcard.
My USB-connected K3s is running fine with N1MM Logger+ and "USB Audio
CODEC" selected as my Radio 1 output device. I've got MIC + LIN On
and I see the wav file properly moving the level meter in Windows
sound and the level is set at 100, but no tx audio on the K3s. It
appears that everything is working as it should in Logger+. Is there
a separate LIN level control I need to adjust on the K3s or some other
reason I'm not seeing tx audio being driven?

Thanks & 73,
Barry N1EU
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

N1EU

Re: Getting Logger+ tx audio via K3s USB audio codec

Thanks Fred, I didn't. I've got Mic+Lin working fine with another
soundcard but can't get the USB audio to play through.

73, Barry N1EU

On Sat, Dec 12, 2015 at 2:01 PM, Cady, Fred <[hidden email]> wrote:

> Hi Barry,
> Make sure you don't have a cable plugged into the K3s Line In jack.
> 73,
> Fred KE7X
>
> For all KE7X Elecraft books, see www.ke7x.com
>
> ________________________________________
> From: Elecraft <[hidden email]> on behalf of Barry N1EU <[hidden email]>
> Sent: Saturday, December 12, 2015 6:46 AM
> To: elecraft; [hidden email]
> Subject: [Elecraft] Getting Logger+ tx audio via K3s USB audio codec
>
> Would appreciate any tips to getting the N1MM Logger+ soundcard voice
> keyer properly keying/driving my K3s via the internal USB soundcard.
> My USB-connected K3s is running fine with N1MM Logger+ and "USB Audio
> CODEC" selected as my Radio 1 output device. I've got MIC + LIN On
> and I see the wav file properly moving the level meter in Windows
> sound and the level is set at 100, but no tx audio on the K3s. It
> appears that everything is working as it should in Logger+. Is there
> a separate LIN level control I need to adjust on the K3s or some other
> reason I'm not seeing tx audio being driven?
>
> Thanks & 73,
> Barry N1EU
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

N1EU

Re: Getting Logger+ tx audio via K3s USB audio codec

In reply to this post by N1EU

I've gotten many good tips but my USB audio is still dead. So I
simplified my attempt like this:

Mic+Lin off
Mic Sel Line In
Line Level 60 (max)
Nothing plugged into Line In

Set up Audacity loop playing audio file with Speaker output as USB Audio Codec
I see the Windows Sound Playback level jumping up and down as expected
- audio is going to the device

Push PTT on K3s and absolutely no tx audio

Is there anything I'm possibly missing?

Thanks & 73,
Barry N1EU

On Sat, Dec 12, 2015 at 1:46 PM, Barry N1EU <[hidden email]> wrote:

Rick WA6NHC-2

Re: Getting Logger+ tx audio via K3s USB audio codec

Have you set the output levels on the OS driver? In mine, that should
be at or near max output...

Rick nhc

On 12/12/2015 8:59 AM, Barry N1EU wrote:

> I've gotten many good tips but my USB audio is still dead. So I
> simplified my attempt like this:
>
> Mic+Lin off
> Mic Sel Line In
> Line Level 60 (max)
> Nothing plugged into Line In
>
> Set up Audacity loop playing audio file with Speaker output as USB Audio Codec
> I see the Windows Sound Playback level jumping up and down as expected
> - audio is going to the device
>
> Push PTT on K3s and absolutely no tx audio
>
> Is there anything I'm possibly missing?
>
>
> Thanks & 73,
> Barry N1EU
>
> On Sat, Dec 12, 2015 at 1:46 PM, Barry N1EU <[hidden email]> wrote:
>> Would appreciate any tips to getting the N1MM Logger+ soundcard voice
>> keyer properly keying/driving my K3s via the internal USB soundcard.
>> My USB-connected K3s is running fine with N1MM Logger+ and "USB Audio
>> CODEC" selected as my Radio 1 output device. I've got MIC + LIN On
>> and I see the wav file properly moving the level meter in Windows
>> sound and the level is set at 100, but no tx audio on the K3s. It
>> appears that everything is working as it should in Logger+. Is there
>> a separate LIN level control I need to adjust on the K3s or some other
>> reason I'm not seeing tx audio being driven?
>>
>> Thanks & 73,
>> Barry N1EU
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

N1EU

Re: Getting Logger+ tx audio via K3s USB audio codec

yes, it's already max

On Sat, Dec 12, 2015 at 6:16 PM, Rick WA6NHC <[hidden email]> wrote:

> Have you set the output levels on the OS driver? In mine, that should be at
> or near max output...
>
> Rick nhc
>
>
>
> On 12/12/2015 8:59 AM, Barry N1EU wrote:
>>
>> I've gotten many good tips but my USB audio is still dead. So I
>> simplified my attempt like this:
>>
>> Mic+Lin off
>> Mic Sel Line In
>> Line Level 60 (max)
>> Nothing plugged into Line In
>>
>> Set up Audacity loop playing audio file with Speaker output as USB Audio
>> Codec
>> I see the Windows Sound Playback level jumping up and down as expected
>> - audio is going to the device
>>
>> Push PTT on K3s and absolutely no tx audio
>>
>> Is there anything I'm possibly missing?
>>
>>
>> Thanks & 73,
>> Barry N1EU
>>
>> On Sat, Dec 12, 2015 at 1:46 PM, Barry N1EU <[hidden email]> wrote:
>>>
>>> Would appreciate any tips to getting the N1MM Logger+ soundcard voice
>>> keyer properly keying/driving my K3s via the internal USB soundcard.
>>> My USB-connected K3s is running fine with N1MM Logger+ and "USB Audio
>>> CODEC" selected as my Radio 1 output device. I've got MIC + LIN On
>>> and I see the wav file properly moving the level meter in Windows
>>> sound and the level is set at 100, but no tx audio on the K3s. It
>>> appears that everything is working as it should in Logger+. Is there
>>> a separate LIN level control I need to adjust on the K3s or some other
>>> reason I'm not seeing tx audio being driven?
>>>
>>> Thanks & 73,
>>> Barry N1EU
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]