Ghost in my K3?

classic Classic list List threaded Threaded
7 messages Options
Reply | Threaded
Open this post in threaded view
|

Ghost in my K3?

Michael Eberle
Ok, I just had something really strange happen with my K3.  I was
listening to a strong signal and all of a sudden all the audio dropped
out, and the S meter dropped down to nothing, yet the P3 still showed
the signal.  Apparently a disconnect in the IF after the P3 output.  
Cycling power a couple times didn't help.  Then I pressed TUNE and it
would not key the transmitter and the VFO-B area showed 0 watts.  After
trying the TUNE button a couple times, all of a sudden it went back to
normal operation.  Has anyone else ever had this happen?  What could
have caused this, maybe a loose cable?

Thanks,
Mike
KI0HA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Ghost in my K3?

Fred Townsend-2
Sounds like a job for ghost busters. OK, maybe a bad contact pin. How old is your K3?
73
Fred, AE6QL


-----Original Message-----

>From: Michael Eberle <[hidden email]>
>Sent: Oct 4, 2014 3:46 PM
>To: [hidden email]
>Subject: [Elecraft] Ghost in my K3?
>
>Ok, I just had something really strange happen with my K3.  I was
>listening to a strong signal and all of a sudden all the audio dropped
>out, and the S meter dropped down to nothing, yet the P3 still showed
>the signal.  Apparently a disconnect in the IF after the P3 output.  
>Cycling power a couple times didn't help.  Then I pressed TUNE and it
>would not key the transmitter and the VFO-B area showed 0 watts.  After
>trying the TUNE button a couple times, all of a sudden it went back to
>normal operation.  Has anyone else ever had this happen?  What could
>have caused this, maybe a loose cable?
>
>Thanks,
>Mike
>KI0HA
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Ghost in my K3?

Michael Eberle
I have had the K3 for about 5 years now.  S/N 2679.  And to clarify, I
guess it did key the transmitter because the TX light would come on but
it did not put out any power and showed 0 Watts on the display.  I have
not had any other problems except for the headphone jack on the rear. I
probably plugged a mono plug into it by mistake.

On 10/4/2014 5:52 PM, Fred Townsend wrote:

> Sounds like a job for ghost busters. OK, maybe a bad contact pin. How old is your K3?
> 73
> Fred, AE6QL
>
>
> -----Original Message-----
>> From: Michael Eberle <[hidden email]>
>> Sent: Oct 4, 2014 3:46 PM
>> To: [hidden email]
>> Subject: [Elecraft] Ghost in my K3?
>>
>> Ok, I just had something really strange happen with my K3.  I was
>> listening to a strong signal and all of a sudden all the audio dropped
>> out, and the S meter dropped down to nothing, yet the P3 still showed
>> the signal.  Apparently a disconnect in the IF after the P3 output.
>> Cycling power a couple times didn't help.  Then I pressed TUNE and it
>> would not key the transmitter and the VFO-B area showed 0 watts.  After
>> trying the TUNE button a couple times, all of a sudden it went back to
>> normal operation.  Has anyone else ever had this happen?  What could
>> have caused this, maybe a loose cable?
>>
>> Thanks,
>> Mike
>> KI0HA
>>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Ghost in my K3?

Fred Townsend-2
In reply to this post by Michael Eberle
OK then I think you have tin pins (not to confused with game a ten pins). Contact customer service for free replacment pins.

73
Fred


-----Original Message-----

>From: Michael Eberle <[hidden email]>
>Sent: Oct 4, 2014 4:03 PM
>To: Fred Townsend <[hidden email]>, [hidden email]
>Subject: Re: [Elecraft] Ghost in my K3?
>
>I have had the K3 for about 5 years now.  S/N 2679.  And to clarify, I
>guess it did key the transmitter because the TX light would come on but
>it did not put out any power and showed 0 Watts on the display.  I have
>not had any other problems except for the headphone jack on the rear. I
>probably plugged a mono plug into it by mistake.
>
>On 10/4/2014 5:52 PM, Fred Townsend wrote:
>> Sounds like a job for ghost busters. OK, maybe a bad contact pin. How old is your K3?
>> 73
>> Fred, AE6QL
>>
>>
>> -----Original Message-----
>>> From: Michael Eberle <[hidden email]>
>>> Sent: Oct 4, 2014 3:46 PM
>>> To: [hidden email]
>>> Subject: [Elecraft] Ghost in my K3?
>>>
>>> Ok, I just had something really strange happen with my K3.  I was
>>> listening to a strong signal and all of a sudden all the audio dropped
>>> out, and the S meter dropped down to nothing, yet the P3 still showed
>>> the signal.  Apparently a disconnect in the IF after the P3 output.
>>> Cycling power a couple times didn't help.  Then I pressed TUNE and it
>>> would not key the transmitter and the VFO-B area showed 0 watts.  After
>>> trying the TUNE button a couple times, all of a sudden it went back to
>>> normal operation.  Has anyone else ever had this happen?  What could
>>> have caused this, maybe a loose cable?
>>>
>>> Thanks,
>>> Mike
>>> KI0HA
>>>
>>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Ghost in my K3?

Michael Eberle
Ok, it has cut out a couple more times.  Which pins are you referring to?

On 10/4/2014 6:13 PM, Fred Townsend wrote:
> OK then I think you have tin pins (not to confused with game a ten pins). Contact customer service for free replacment pins.
>
> 73
> Fred
>
>
> -----Original Message-----

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Ghost in my K3?

Joe Subich, W4TV-4

Pins connecting the front panel to the main (RF) board.

73,

    ... Joe, W4TV


On 2014-10-04 7:51 PM, Michael Eberle wrote:

> Ok, it has cut out a couple more times.  Which pins are you referring to?
>
> On 10/4/2014 6:13 PM, Fred Townsend wrote:
>> OK then I think you have tin pins (not to confused with game a ten
>> pins). Contact customer service for free replacment pins.
>>
>> 73
>> Fred
>>
>>
>> -----Original Message-----
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Ghost in my K3?

Fred Townsend-2
In reply to this post by Michael Eberle

Joe has it nailed. Just call customer service on Monday and give them your serial number and tell them you have the interminent pin problem. They will give your options. You may want to talk about other upgrades too.
73
Fred


-----Original Message-----

>From: "Joe Subich, W4TV" <[hidden email]>
>Sent: Oct 4, 2014 4:55 PM
>To: [hidden email]
>Subject: Re: [Elecraft] Ghost in my K3?
>
>
>Pins connecting the front panel to the main (RF) board.
>
>73,
>
>    ... Joe, W4TV
>
>
>On 2014-10-04 7:51 PM, Michael Eberle wrote:
>> Ok, it has cut out a couple more times.  Which pins are you referring to?
>>
>> On 10/4/2014 6:13 PM, Fred Townsend wrote:
>>> OK then I think you have tin pins (not to confused with game a ten
>>> pins). Contact customer service for free replacment pins.
>>>
>>> 73
>>> Fred
>>>
>>>
>>> -----Original Message-----
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
>>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]