Has anyone recently got a K2 Kit with the NEW main Knob, Does it Fit?

[Elecraft mailing list]

When I ordered my K2 (end of January) it came in with the old style knob not the one that was in the Errata sheet (same style as the KX3).


After a series of calls and e-mails I finally got Elecraft to send the knob only to find that it does not fit correctly as the encoder shaft

is too long so it sticks out from the front panel and does not engage on the felt washer. Additionally the knob is also too large (diameter
in the rear where it flairs out so it it did engage the felt washer it would rub on the Display bezel.


So my question is to those who recently got a K2 (NOT the KX2).
Did you receive a KX3 style Knob as per the Errata Sheet and if so does it fit correctly?


Thank you



.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Cameron Francey]

Hi Harry,

I have my second  K2 which I got in the middle of January.

Both the knob on my earlier one, from June 2016 and the one from January 2017 is the same, and it fits perfectly.  The knob is the updated one which also ships with the new encoder assembly.


Hope that helps,


Cameron - AF7DK/GM7LQR



________________________________
From: Elecraft <[hidden email]> on behalf of Harry Yingst via Elecraft <[hidden email]>
Sent: Wednesday, April 12, 2017 7:26 PM
To: Elecraft Reflector
Subject: [Elecraft] Has anyone recently got a K2 Kit with the NEW main Knob, Does it Fit?


When I ordered my K2 (end of January) it came in with the old style knob not the one that was in the Errata sheet (same style as the KX3).


After a series of calls and e-mails I finally got Elecraft to send the knob only to find that it does not fit correctly as the encoder shaft

is too long so it sticks out from the front panel and does not engage on the felt washer. Additionally the knob is also too large (diameter
in the rear where it flairs out so it it did engage the felt washer it would rub on the Display bezel.


So my question is to those who recently got a K2 (NOT the KX2).
Did you receive a KX3 style Knob as per the Errata Sheet and if so does it fit correctly?


Thank you



.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Elecraft mailing list]

That is the old style knob same as on my old K2 and the one I just built
The new one as per the eratta (that came out in December as I recall).Has a knob like the kx3 metal with a dimple and rubber tire.



-------- Original message --------
From: Cameron Francey <[hidden email]>
Date: 2017-04-12  11:02 PM  (GMT-05:00)
To: Harry Yingst <[hidden email]>, Elecraft Reflector <[hidden email]>
Subject: Re: [Elecraft] Has anyone recently got a K2 Kit with the NEW main Knob, Does it Fit?



Hi Harry,


I have my second  K2 which I got in the middle of January.  
Both the knob on my earlier one, from June 2016 and the one from January 2017 is the same, and it fits perfectly.  The knob is the updated one which also ships with the new encoder
 assembly.



Hope that helps, 



Cameron - AF7DK/GM7LQR










From: Elecraft <[hidden email]> on behalf of Harry Yingst via Elecraft <[hidden email]>

Sent: Wednesday, April 12, 2017 7:26 PM

To: Elecraft Reflector

Subject: [Elecraft] Has anyone recently got a K2 Kit with the NEW main Knob, Does it Fit?
 





When I ordered my K2 (end of January) it came in with the old style knob not the one that was in the Errata sheet (same style as the KX3).





After a series of calls and e-mails I finally got Elecraft to send the knob only to find that it does not fit correctly as the encoder shaft



is too long so it sticks out from the front panel and does not engage on the felt washer. Additionally the knob is also too large (diameter

in the rear where it flairs out so it it did engage the felt washer it would rub on the Display bezel.





So my question is to those who recently got a K2 (NOT the KX2).

Did you receive a KX3 style Knob as per the Errata Sheet and if so does it fit correctly?





Thank you







.

______________________________________________________________

Elecraft mailing list

Home:
http://mailman.qth.net/mailman/listinfo/elecraft

Help:
http://mailman.qth.net/mmfaq.htm

Post: mailto:[hidden email]



This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html

Message delivered to [hidden email]




______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Cameron Francey]

You had me wondering so I just popped out to the shack to check on all the manuals and errata sheets that came with my June 2016 K2 and the later one in January 2017.

Both came with errata revision A March 2012.

I see now that there is a newer errata sheet revision B from November 2016.

http://www.elecraft.com/manual/E740177%20K2%20Encoder%20Installation%20Instructions,%20rev%20B.pdf


I'm guessing my January 19th 2017 order must have shipped with the older version of the knob.



Cameron,



________________________________
From: Harry Yingst <[hidden email]>
Sent: Wednesday, April 12, 2017 8:19 PM
To: Cameron Francey; Elecraft Reflector
Subject: Re: [Elecraft] Has anyone recently got a K2 Kit with the NEW main Knob, Does it Fit?

That is the old style knob same as on my old K2 and the one I just built

The new one as per the eratta (that came out in December as I recall).
Has a knob like the kx3 metal with a dimple and rubber tire.




-------- Original message --------
From: Cameron Francey <[hidden email]>
Date: 2017-04-12 11:02 PM (GMT-05:00)
To: Harry Yingst <[hidden email]>, Elecraft Reflector <[hidden email]>
Subject: Re: [Elecraft] Has anyone recently got a K2 Kit with the NEW main Knob, Does it Fit?


Hi Harry,

I have my second  K2 which I got in the middle of January.

Both the knob on my earlier one, from June 2016 and the one from January 2017 is the same, and it fits perfectly.  The knob is the updated one which also ships with the new encoder assembly.


Hope that helps,


Cameron - AF7DK/GM7LQR



________________________________
From: Elecraft <[hidden email]> on behalf of Harry Yingst via Elecraft <[hidden email]>
Sent: Wednesday, April 12, 2017 7:26 PM
To: Elecraft Reflector
Subject: [Elecraft] Has anyone recently got a K2 Kit with the NEW main Knob, Does it Fit?


When I ordered my K2 (end of January) it came in with the old style knob not the one that was in the Errata sheet (same style as the KX3).


After a series of calls and e-mails I finally got Elecraft to send the knob only to find that it does not fit correctly as the encoder shaft

is too long so it sticks out from the front panel and does not engage on the felt washer. Additionally the knob is also too large (diameter
in the rear where it flairs out so it it did engage the felt washer it would rub on the Display bezel.


So my question is to those who recently got a K2 (NOT the KX2).
Did you receive a KX3 style Knob as per the Errata Sheet and if so does it fit correctly?


Thank you



.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]