Heil pro set

[Ken Chandler]

Hi
Saw it mentioned somewhere but is it the kenwood adaptor required for  
the K3!!

Ken..G0ORH

Sent from my iPhone



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Ken,

If you plug the ProSet into the front panel, yes, the Kenwood adapter is
the right one.
On the K3 it can be plugged into the rear panel with no adapter.

The ProSet-K2 and the ProSet-iC have electret elements and need bias
turned on.  The others are dynamic and need no bias.

73,
Don W3FPR

Ken Chandler wrote:
> Hi
> Saw it mentioned somewhere but is it the kenwood adaptor required for  
> the K3!!
>
> Ken..G0ORH
>  
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[PD2R]

If you want to connect it to front panel microphone connector, yes. But the
K3 also has a microphone jack on the back panel and then you don't need the
Kenwood adaptor.
For my Pro Set plus I use the jacks on the back and I use a Kenwood hand
microphone on the front.

73, Maarten
PD2R




2010/1/7 Ken Chandler <[hidden email]>

> Hi
> Saw it mentioned somewhere but is it the kenwood adaptor required for
> the K3!!
>
> Ken..G0ORH
>
> Sent from my iPhone
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Ken Chandler]

Tks everyone for advice.
Now sorted.
73's

Ken..G0ORH

Sent from my iPhone




On 7 Jan 2010, at 12:58, Maarten van Rossum <[hidden email]>  
wrote:

> If you want to connect it to front panel microphone connector, yes.  
> But the K3 also has a microphone jack on the back panel and then you  
> don't need the Kenwood adaptor.
> For my Pro Set plus I use the jacks on the back and I use a Kenwood  
> hand microphone on the front.
>
> 73, Maarten
> PD2R
>
>
>
>
> 2010/1/7 Ken Chandler <[hidden email]>
> Hi
> Saw it mentioned somewhere but is it the kenwood adaptor required for
> the K3!!
>
> Ken..G0ORH
>
> Sent from my iPhone
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html